> No, RFNoC will not be supported on the B200mini, and not on the B200/B210. OK. thanks. What was meant by "user-programmable Xilinx Spartan-6 FPGA" then? Just that the FPGA can be updated by the user like all the other USRPs? (just making sure I am not missing some new feature)

Hi all, The 2nd Gen Devices have a similar fpga as the B200. RFNoC is just too big for it, i guess. But they have this place holders (custom_dsp_rx.v, ...) instead. I think for many people (including me) it is too complicated / too time consuming to hack in the fpga sources of a b200 and put their custom dsp on the right place. (In the case of the 2nd gen devices it's absolute doable, as you don´t need to hack.) Long story short: Ettus people, add a fpga/usrp3/custom for the 3rd gen devices too small for RFNoC. Better you do it once, than many (or not so many) people have to do it themselves! ;-) --Anselm 2015-10-01 13:59 GMT+02:00 Jason Matusiak via USRP-users < usrp-users@lists.ettus.com>: > > No, RFNoC will not be supported on the B200mini, and not on the > B200/B210. > > OK. thanks. What was meant by "user-programmable Xilinx Spartan-6 FPGA" > then? Just that the FPGA can be updated by the user like all the other > USRPs? (just making sure I am not missing some new feature) > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > -- Mit freundlichen Grüßen *Anselm Karl*

Hello Jason: That's right, "user-programmable" means that the FPGA code is open-source and can be freely modified by the user, as with all USRP devices. --Neel On 1 October 2015 at 04:59, Jason Matusiak <jason@gardettoengineering.com> wrote: > > No, RFNoC will not be supported on the B200mini, and not on the > B200/B210. > > OK. thanks. What was meant by "user-programmable Xilinx Spartan-6 FPGA" > then? Just that the FPGA can be updated by the user like all the other > USRPs? (just making sure I am not missing some new feature) >