Is anyone with RF layout experience able to make a quick sanity check of this board? It's a fox designed for 2m FM. Github repo is below and contains gerbers and 3d exports in VRML and STEP. The original kicad files are there as well. Target process is oshpark standard 2 layer 1.6mm fr4 with 1oz copper. https://github.com/tclarke/fox_hunt_2m_fm -- Trevor R.H. Clarke Computer Science House Rochester Institute of Technology retrev@csh.rit.edu http://www.csh.rit.edu/~retrev/

I forgot to mention, it's designed as a mezzanine for this ATtiny412 board which is providing a digital signal to switch power to the RF on and off and an analog signal to modulate the frequency tune pin. https://www.tindie.com/products/drazzy/attiny412similar-breakout-board-bare-board/ On Wed, May 19, 2021 at 3:22 PM Trevor Clarke <retrev@csh.rit.edu> wrote: > Is anyone with RF layout experience able to make a quick sanity check of > this board? It's a fox designed for 2m FM. Github repo is below and > contains gerbers and 3d exports in VRML and STEP. The original kicad files > are there as well. Target process is oshpark standard 2 layer 1.6mm fr4 > with 1oz copper. > > https://github.com/tclarke/fox_hunt_2m_fm > > -- > Trevor R.H. Clarke > Computer Science House > Rochester Institute of Technology > retrev@csh.rit.edu > http://www.csh.rit.edu/~retrev/ > -- Trevor R.H. Clarke Computer Science House Rochester Institute of Technology retrev@csh.rit.edu http://www.csh.rit.edu/~retrev/