usrp-users@lists.ettus.com
Discussion and technical support related to USRP, UHD, RFNoC
View all threadsCustom RFNOC fpga image build failed
Hello all, (Sorry about multiple messages. I guess i had a problem about
my mail client)
I am trying to build custom FPGA image for E310 which includes DDC and FFT.
I compiled and installed;
-
UHD master branch (using -DENABLE_RFNOC=ON)
-
gnuradio v3.7.13.4
-
gr-ettus master
After installing i have checked version of UHD.
UHD version: 3.14.0.0-0-gabf0db4e
Then according to instructions in this page :
https://kb.ettus.com/Getting_Started_with_RFNoC_Development
I cloned https://github.com/EttusResearch/fpga.git repo. I have Xilinx
Vivado 2017.4 webpack.
Then, I setup environment from fpga/usrp3/top/e300/setupenv.sh.
cd {USER_PREFIX}/fpga/usrp3/tools/scripts
./uhd_image_builder.py ddc fft -d e310 -t E310_RFNOC_sg3 -m 5
--fill-with-fifos
--Using the following blocks to generate image:
* ddc
* fft
Adding CE instantiation file for 'E310_RFNOC_sg3'
changing temporarily working directory to
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/../../top/e300
Setting up a 64-bit FPGA build environment for the USRP-E3x0...
- Vivado: Found (/opt/Xilinx/Vivado/2017.4/bin)
Environment successfully initialized.
make -f Makefile.e300.inc bin NAME=E310_RFNOC_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 RFNOC=1 E310=1
EXTRA_DEFS="RFNOC=1 E310=1"
make[1]: Entering directory '/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
BUILDER: Checking tools...
- GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.12
- Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi_dma_stream
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/viv_generate_ip.tcl -log
axi_dma_stream.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:13] Current task: Initialization +++ Current Phase: Starting
[00:00:13] Current task: Initialization +++ Current Phase: Finished
[00:00:13] Executing Tcl: synth_design -top axi_dma_stream -part
xc7z020clg484-3 -mode out_of_context
[00:00:13] Starting Synthesis Command
[00:00:13] Current task: Synthesis +++ Current Phase: Starting
ERROR: [filemgmt 56-148]
@57j-140@/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Vivado 12-398] No designs are open
[00:00:14] Current task: Synthesis +++ Current Phase: Finished
[00:00:14] Process terminated. Status: Failure
---=======================
Warnings: 0
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/ip/axi_dma_stream/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci]
Error 1
make[1]: Leaving directory '/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
Makefile:70: recipe for target 'E310_RFNOC_sg3' failed
make: *** [E310_RFNOC_sg3] Error 2
Can you please point me what i did wrong ?
Best Regards.
Hi Ramazan,
I was able to build an E310 RFNoC image with a DDC and FFT block from
master (e57dfe075) on the FPGA repo, so I don't think there is an issue
with the code base. The error messages make me wonder if your Vivado
install is corrupt. Are you able to build any other images, such as the
default X310 image (i.e. run 'source setupenv.sh; make X310_HG' in the
fpga/usrp3/top/x300 dir)?
Jonathon
On Sun, Feb 3, 2019 at 6:53 AM Ramazan Çetin via USRP-users <
usrp-users@lists.ettus.com> wrote:
Hello all, (Sorry about multiple messages. I guess i had a problem about
my mail client)
I am trying to build custom FPGA image for E310 which includes DDC and FFT.
I compiled and installed;
-
UHD master branch (using -DENABLE_RFNOC=ON)
-
gnuradio v3.7.13.4
-
gr-ettus master
After installing i have checked version of UHD.
UHD version: 3.14.0.0-0-gabf0db4e
Then according to instructions in this page :
https://kb.ettus.com/Getting_Started_with_RFNoC_Development
I cloned https://github.com/EttusResearch/fpga.git repo. I have Xilinx
Vivado 2017.4 webpack.
Then, I setup environment from fpga/usrp3/top/e300/setupenv.sh.
cd {USER_PREFIX}/fpga/usrp3/tools/scripts
./uhd_image_builder.py ddc fft -d e310 -t E310_RFNOC_sg3 -m 5
--fill-with-fifos
--Using the following blocks to generate image:
* ddc
* fft
Adding CE instantiation file for 'E310_RFNOC_sg3'
changing temporarily working directory to
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/../../top/e300
Setting up a 64-bit FPGA build environment for the USRP-E3x0...
- Vivado: Found (/opt/Xilinx/Vivado/2017.4/bin)
Environment successfully initialized.
make -f Makefile.e300.inc bin NAME=E310_RFNOC_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 RFNOC=1 E310=1
EXTRA_DEFS="RFNOC=1 E310=1"
make[1]: Entering directory '/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
BUILDER: Checking tools...
- GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.12
- Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi_dma_stream
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/viv_generate_ip.tcl -log
axi_dma_stream.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:13] Current task: Initialization +++ Current Phase: Starting
[00:00:13] Current task: Initialization +++ Current Phase: Finished
[00:00:13] Executing Tcl: synth_design -top axi_dma_stream -part
xc7z020clg484-3 -mode out_of_context
[00:00:13] Starting Synthesis Command
[00:00:13] Current task: Synthesis +++ Current Phase: Starting
ERROR: [filemgmt 56-148]
@57j-140@/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Vivado 12-398] No designs are open
[00:00:14] Current task: Synthesis +++ Current Phase: Finished
[00:00:14] Process terminated. Status: Failure
---=======================
Warnings: 0
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/ip/axi_dma_stream/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci]
Error 1
make[1]: Leaving directory '/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
Makefile:70: recipe for target 'E310_RFNOC_sg3' failed
make: *** [E310_RFNOC_sg3] Error 2
Can you please point me what i did wrong ?
Best Regards.
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Hi Jonathon,
Thank you for your answer. I have tried building default X310 image and
got this error.
make -f Makefile.x300.inc bin NAME=X310_HG ARCH=kintex7
PART_ID=xc7k410t/ffg900/-2 BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1
SFP1_10GBE=1 X310=1 TOP_MODULE=x300 EXTRA_DEFS="BUILD_1G=1 BUILD_10G=1
SFP0_1GBE=1 SFP1_10GBE=1 X310=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300'
BUILDER: Checking tools...
- GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.12
- Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP ten_gig_eth_pcs_pma
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
BUILDER: Retargeting IP to part kintex7/xc7k410t/ffg900/-2...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl
-log ten_gig_eth_pcs_pma.log -nojournal
[00:00:10] Current task: Initialization +++ Current Phase: Starting
WARNING: [Device 21-436] No parts matched 'xc7k410tffg900-2'
ERROR: [Coretcl 2-106] Specified part could not be found.
[00:00:10] Current task: Initialization +++ Current Phase: Finished
[00:00:10] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 0
Errors: 1
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/ip/ten_gig_eth_pcs_pma/Makefile.inc:41:
recipe for target
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300'
Makefile:72: recipe for target 'X310_HG' failed
make: *** [X310_HG] Error 2
I think it can be licence related problem. Because i installed webpack
version of Vivado (This version requires no licence)
When i try building default E310 image;
cd .../top/e300
source setupenv.sh
make E310_sg3
I got the same error as before.
make -f Makefile.e300.inc bin NAME=E310_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 E310=1 E3XX_SG3=1
EXTRA_DEFS="E310=1 E3XX_SG3=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300'
BUILDER: Checking tools...
- GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.12
- Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi4_to_axi3_protocol_converter
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl
-log axi4_to_axi3_protocol_converter.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
WARNING: [IP_Flow 19-4994] Overwriting existing constraint file
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter_ooc.xdc'
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:11] Current task: Initialization +++ Current Phase: Starting
[00:00:11] Current task: Initialization +++ Current Phase: Finished
[00:00:11] Executing Tcl: synth_design -top
axi4_to_axi3_protocol_converter -part xc7z020clg484-3 -mode out_of_context
[00:00:11] Starting Synthesis Command
ERROR: [filemgmt 56-148]
@57j-140@/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
[00:00:12] Current task: Synthesis +++ Current Phase: Starting
ERROR: [Vivado 12-398] No designs are open
[00:00:12] Current task: Synthesis +++ Current Phase: Finished
[00:00:12] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/ip/axi4_to_axi3_protocol_converter/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter.xci]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300'
Makefile:60: recipe for target 'E310_sg3' failed
make: *** [E310_sg3] Error 2
The error says it cannot read ip file.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
I installed Xilinx Vivado using root privileges. Can the problem related
with privileges ? I think Webpack version is okay for E310 (No licence
reuires).
Thank you for your time.
Best regards.
On 3.02.2019 06:22, Jonathon Pendlum wrote:
Hi Ramazan,
I was able to build an E310 RFNoC image with a DDC and FFT block from
master (e57dfe075) on the FPGA repo, so I don't think there is an
issue with the code base. The error messages make me wonder if your
Vivado install is corrupt. Are you able to build any other images,
such as the default X310 image (i.e. run 'source setupenv.sh; make
X310_HG' in the fpga/usrp3/top/x300 dir)?
Jonathon
On Sun, Feb 3, 2019 at 6:53 AM Ramazan Çetin via USRP-users
<usrp-users@lists.ettus.com mailto:usrp-users@lists.ettus.com> wrote:
Hello all, (Sorry about multiple messages. I guess i had a problem
about
my mail client)
I am trying to build custom FPGA image for E310 which includes DDC
and FFT.
I compiled and installed;
- UHD master branch (using -DENABLE_RFNOC=ON)
- gnuradio v3.7.13.4
- gr-ettus master
After installing i have checked version of UHD.
UHD version: 3.14.0.0-0-gabf0db4e
Then according to instructions in this page :
https://kb.ettus.com/Getting_Started_with_RFNoC_Development
I cloned https://github.com/EttusResearch/fpga.git repo. I have
Xilinx
Vivado 2017.4 webpack.
Then, I setup environment from fpga/usrp3/top/e300/setupenv.sh.
cd {USER_PREFIX}/fpga/usrp3/tools/scripts
./uhd_image_builder.py ddc fft -d e310 -t E310_RFNOC_sg3 -m 5
--fill-with-fifos
--Using the following blocks to generate image:
* ddc
* fft
Adding CE instantiation file for 'E310_RFNOC_sg3'
changing temporarily working directory to
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/../../top/e300
Setting up a 64-bit FPGA build environment for the USRP-E3x0...
- Vivado: Found (/opt/Xilinx/Vivado/2017.4/bin)
Environment successfully initialized.
make -f Makefile.e300.inc bin NAME=E310_RFNOC_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 RFNOC=1 E310=1
EXTRA_DEFS="RFNOC=1 E310=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
BUILDER: Checking tools...
* GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
* Python 2.7.12
* Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi_dma_stream
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/viv_generate_ip.tcl
-log
axi_dma_stream.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:13] Current task: Initialization +++ Current Phase: Starting
[00:00:13] Current task: Initialization +++ Current Phase: Finished
[00:00:13] Executing Tcl: synth_design -top axi_dma_stream -part
xc7z020clg484-3 -mode out_of_context
[00:00:13] Starting Synthesis Command
[00:00:13] Current task: Synthesis +++ Current Phase: Starting
ERROR: [filemgmt 56-148]
@57j-140@/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing
this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing
this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing
this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing
this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing
this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing
this command.
ERROR: [Vivado 12-398] No designs are open
[00:00:14] Current task: Synthesis +++ Current Phase: Finished
[00:00:14] Process terminated. Status: Failure
---=======================
Warnings: 0
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/ip/axi_dma_stream/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
Makefile:70: recipe for target 'E310_RFNOC_sg3' failed
make: *** [E310_RFNOC_sg3] Error 2
Can you please point me what i did wrong ?
Best Regards.
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Hi Ramazan,
I would give chowning both your Xilinx install and ~/.Xilinx to your
username a try. If that doesn't work, try reinstalling the Xilinx tools.
Jonathon
On Sun, Feb 3, 2019 at 4:49 PM Ramazan Çetin ramazan.cetin@gohm.com.tr
wrote:
Hi Jonathon,
Thank you for your answer. I have tried building default X310 image and
got this error.
make -f Makefile.x300.inc bin NAME=X310_HG ARCH=kintex7
PART_ID=xc7k410t/ffg900/-2 BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1
X310=1 TOP_MODULE=x300 EXTRA_DEFS="BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1
SFP1_10GBE=1 X310=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300'
BUILDER: Checking tools...
- GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.12
- Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP ten_gig_eth_pcs_pma
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
BUILDER: Retargeting IP to part kintex7/xc7k410t/ffg900/-2...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl
-log ten_gig_eth_pcs_pma.log -nojournal
[00:00:10] Current task: Initialization +++ Current Phase: Starting
WARNING: [Device 21-436] No parts matched 'xc7k410tffg900-2'
ERROR: [Coretcl 2-106] Specified part could not be found.
[00:00:10] Current task: Initialization +++ Current Phase: Finished
[00:00:10] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 0
Errors: 1
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/ip/ten_gig_eth_pcs_pma/Makefile.inc:41:
recipe for target
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300'
Makefile:72: recipe for target 'X310_HG' failed
make: *** [X310_HG] Error 2
I think it can be licence related problem. Because i installed webpack
version of Vivado (This version requires no licence)
When i try building default E310 image;
cd .../top/e300
source setupenv.sh
make E310_sg3
I got the same error as before.
make -f Makefile.e300.inc bin NAME=E310_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 E310=1 E3XX_SG3=1
EXTRA_DEFS="E310=1 E3XX_SG3=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300'
BUILDER: Checking tools...
- GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.12
- Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi4_to_axi3_protocol_converter
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl
-log axi4_to_axi3_protocol_converter.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
WARNING: [IP_Flow 19-4994] Overwriting existing constraint file
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter_ooc.xdc'
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:11] Current task: Initialization +++ Current Phase: Starting
[00:00:11] Current task: Initialization +++ Current Phase: Finished
[00:00:11] Executing Tcl: synth_design -top
axi4_to_axi3_protocol_converter -part xc7z020clg484-3 -mode out_of_context
[00:00:11] Starting Synthesis Command
ERROR: [filemgmt 56-148] @57j-140@
/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
[00:00:12] Current task: Synthesis +++ Current Phase: Starting
ERROR: [Vivado 12-398] No designs are open
[00:00:12] Current task: Synthesis +++ Current Phase: Finished
[00:00:12] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/ip/axi4_to_axi3_protocol_converter/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter.xci]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300'
Makefile:60: recipe for target 'E310_sg3' failed
make: *** [E310_sg3] Error 2
The error says it cannot read ip file.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
I installed Xilinx Vivado using root privileges. Can the problem related
with privileges ? I think Webpack version is okay for E310 (No licence
reuires).
Thank you for your time.
Best regards.
On 3.02.2019 06:22, Jonathon Pendlum wrote:
Hi Ramazan,
I was able to build an E310 RFNoC image with a DDC and FFT block from
master (e57dfe075) on the FPGA repo, so I don't think there is an issue
with the code base. The error messages make me wonder if your Vivado
install is corrupt. Are you able to build any other images, such as the
default X310 image (i.e. run 'source setupenv.sh; make X310_HG' in the
fpga/usrp3/top/x300 dir)?
Jonathon
On Sun, Feb 3, 2019 at 6:53 AM Ramazan Çetin via USRP-users <
usrp-users@lists.ettus.com> wrote:
Hello all, (Sorry about multiple messages. I guess i had a problem about
my mail client)
I am trying to build custom FPGA image for E310 which includes DDC and
FFT.
I compiled and installed;
-
UHD master branch (using -DENABLE_RFNOC=ON)
-
gnuradio v3.7.13.4
-
gr-ettus master
After installing i have checked version of UHD.
UHD version: 3.14.0.0-0-gabf0db4e
Then according to instructions in this page :
https://kb.ettus.com/Getting_Started_with_RFNoC_Development
I cloned https://github.com/EttusResearch/fpga.git repo. I have Xilinx
Vivado 2017.4 webpack.
Then, I setup environment from fpga/usrp3/top/e300/setupenv.sh.
cd {USER_PREFIX}/fpga/usrp3/tools/scripts
./uhd_image_builder.py ddc fft -d e310 -t E310_RFNOC_sg3 -m 5
--fill-with-fifos
--Using the following blocks to generate image:
* ddc
* fft
Adding CE instantiation file for 'E310_RFNOC_sg3'
changing temporarily working directory to
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/../../top/e300
Setting up a 64-bit FPGA build environment for the USRP-E3x0...
- Vivado: Found (/opt/Xilinx/Vivado/2017.4/bin)
Environment successfully initialized.
make -f Makefile.e300.inc bin NAME=E310_RFNOC_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 RFNOC=1 E310=1
EXTRA_DEFS="RFNOC=1 E310=1"
make[1]: Entering directory '/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
BUILDER: Checking tools...
- GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.12
- Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi_dma_stream
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/viv_generate_ip.tcl -log
axi_dma_stream.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:13] Current task: Initialization +++ Current Phase: Starting
[00:00:13] Current task: Initialization +++ Current Phase: Finished
[00:00:13] Executing Tcl: synth_design -top axi_dma_stream -part
xc7z020clg484-3 -mode out_of_context
[00:00:13] Starting Synthesis Command
[00:00:13] Current task: Synthesis +++ Current Phase: Starting
ERROR: [filemgmt 56-148]
@57j-140@/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Vivado 12-398] No designs are open
[00:00:14] Current task: Synthesis +++ Current Phase: Finished
[00:00:14] Process terminated. Status: Failure
---=======================
Warnings: 0
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/ip/axi_dma_stream/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci]
Error 1
make[1]: Leaving directory '/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
Makefile:70: recipe for target 'E310_RFNOC_sg3' failed
make: *** [E310_RFNOC_sg3] Error 2
Can you please point me what i did wrong ?
Best Regards.
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Hi Jonathon,
I chowned ~/.Xilinx and other folder etc. it did not work. I installed
Vivado to another directory (/home/rcetin/opt/), it also did not work. I
got the same error. I am running all these things on virtual machine.
Maybe problem can be related with it. I also will try in real machine.
Do you know i should make something extra in Vivado 2017.4 Webpack
licencing (Webpack need no licence file it should directly work) ? And
can we use Vivado 2018.2 (I have full product licence on this program)?
Best regards.
On 3.02.2019 14:17, Jonathon Pendlum wrote:
Hi Ramazan,
I would give chowning both your Xilinx install and ~/.Xilinx to your
username a try. If that doesn't work, try reinstalling the Xilinx tools.
Jonathon
On Sun, Feb 3, 2019 at 4:49 PM Ramazan Çetin
<ramazan.cetin@gohm.com.tr mailto:ramazan.cetin@gohm.com.tr> wrote:
Hi Jonathon,
Thank you for your answer. I have tried building default X310
image and got this error.
make -f Makefile.x300.inc bin NAME=X310_HG ARCH=kintex7
PART_ID=xc7k410t/ffg900/-2 BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1
SFP1_10GBE=1 X310=1 TOP_MODULE=x300 EXTRA_DEFS="BUILD_1G=1
BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 X310=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300'
BUILDER: Checking tools...
* GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
* Python 2.7.12
* Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP ten_gig_eth_pcs_pma
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
BUILDER: Retargeting IP to part kintex7/xc7k410t/ffg900/-2...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl
-log ten_gig_eth_pcs_pma.log -nojournal
[00:00:10] Current task: Initialization +++ Current Phase: Starting
WARNING: [Device 21-436] No parts matched 'xc7k410tffg900-2'
ERROR: [Coretcl 2-106] Specified part could not be found.
[00:00:10] Current task: Initialization +++ Current Phase: Finished
[00:00:10] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 0
Errors: 1
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/ip/ten_gig_eth_pcs_pma/Makefile.inc:41:
recipe for target
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300'
Makefile:72: recipe for target 'X310_HG' failed
make: *** [X310_HG] Error 2
I think it can be licence related problem. Because i installed
webpack version of Vivado (This version requires no licence)
When i try building default E310 image;
cd .../top/e300
source setupenv.sh
make E310_sg3
I got the same error as before.
make -f Makefile.e300.inc bin NAME=E310_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 E310=1 E3XX_SG3=1
EXTRA_DEFS="E310=1 E3XX_SG3=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300'
BUILDER: Checking tools...
* GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
* Python 2.7.12
* Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi4_to_axi3_protocol_converter
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl
-log axi4_to_axi3_protocol_converter.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
WARNING: [IP_Flow 19-4994] Overwriting existing constraint file
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter_ooc.xdc'
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:11] Current task: Initialization +++ Current Phase: Starting
[00:00:11] Current task: Initialization +++ Current Phase: Finished
[00:00:11] Executing Tcl: synth_design -top
axi4_to_axi3_protocol_converter -part xc7z020clg484-3 -mode
out_of_context
[00:00:11] Starting Synthesis Command
ERROR: [filemgmt 56-148]
@57j-140@/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design. Please open
an elaborated, synthesized or implemented design before executing
this command.
ERROR: [Common 17-53] User Exception: No open design. Please open
an elaborated, synthesized or implemented design before executing
this command.
ERROR: [Common 17-53] User Exception: No open design. Please open
an elaborated, synthesized or implemented design before executing
this command.
ERROR: [Common 17-53] User Exception: No open design. Please open
an elaborated, synthesized or implemented design before executing
this command.
ERROR: [Common 17-53] User Exception: No open design. Please open
an elaborated, synthesized or implemented design before executing
this command.
ERROR: [Common 17-53] User Exception: No open design. Please open
an elaborated, synthesized or implemented design before executing
this command.
[00:00:12] Current task: Synthesis +++ Current Phase: Starting
ERROR: [Vivado 12-398] No designs are open
[00:00:12] Current task: Synthesis +++ Current Phase: Finished
[00:00:12] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/ip/axi4_to_axi3_protocol_converter/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter.xci]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300'
Makefile:60: recipe for target 'E310_sg3' failed
make: *** [E310_sg3] Error 2
The error says it cannot read ip file.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
I installed Xilinx Vivado using root privileges. Can the problem
related with privileges ? I think Webpack version is okay for E310
(No licence reuires).
Thank you for your time.
Best regards.
On 3.02.2019 06:22, Jonathon Pendlum wrote:
Hi Ramazan,
I was able to build an E310 RFNoC image with a DDC and FFT block
from master (e57dfe075) on the FPGA repo, so I don't think there
is an issue with the code base. The error messages make me wonder
if your Vivado install is corrupt. Are you able to build any
other images, such as the default X310 image (i.e. run 'source
setupenv.sh; make X310_HG' in the fpga/usrp3/top/x300 dir)?
Jonathon
On Sun, Feb 3, 2019 at 6:53 AM Ramazan Çetin via USRP-users
<usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>>
wrote:
Hello all, (Sorry about multiple messages. I guess i had a
problem about
my mail client)
I am trying to build custom FPGA image for E310 which
includes DDC and FFT.
I compiled and installed;
- UHD master branch (using -DENABLE_RFNOC=ON)
- gnuradio v3.7.13.4
- gr-ettus master
After installing i have checked version of UHD.
UHD version: 3.14.0.0-0-gabf0db4e
Then according to instructions in this page :
https://kb.ettus.com/Getting_Started_with_RFNoC_Development
I cloned https://github.com/EttusResearch/fpga.git repo. I
have Xilinx
Vivado 2017.4 webpack.
Then, I setup environment from fpga/usrp3/top/e300/setupenv.sh.
cd {USER_PREFIX}/fpga/usrp3/tools/scripts
./uhd_image_builder.py ddc fft -d e310 -t E310_RFNOC_sg3 -m 5
--fill-with-fifos
--Using the following blocks to generate image:
* ddc
* fft
Adding CE instantiation file for 'E310_RFNOC_sg3'
changing temporarily working directory to
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/../../top/e300
Setting up a 64-bit FPGA build environment for the USRP-E3x0...
- Vivado: Found (/opt/Xilinx/Vivado/2017.4/bin)
Environment successfully initialized.
make -f Makefile.e300.inc bin NAME=E310_RFNOC_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 RFNOC=1 E310=1
EXTRA_DEFS="RFNOC=1 E310=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
BUILDER: Checking tools...
* GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
* Python 2.7.12
* Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi_dma_stream
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/viv_generate_ip.tcl
-log
axi_dma_stream.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:13] Current task: Initialization +++ Current Phase:
Starting
[00:00:13] Current task: Initialization +++ Current Phase:
Finished
[00:00:13] Executing Tcl: synth_design -top axi_dma_stream -part
xc7z020clg484-3 -mode out_of_context
[00:00:13] Starting Synthesis Command
[00:00:13] Current task: Synthesis +++ Current Phase: Starting
ERROR: [filemgmt 56-148]
@57j-140@/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design. Please
open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please
open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please
open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please
open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please
open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please
open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Vivado 12-398] No designs are open
[00:00:14] Current task: Synthesis +++ Current Phase: Finished
[00:00:14] Process terminated. Status: Failure
---=======================
Warnings: 0
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/ip/axi_dma_stream/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
Makefile:70: recipe for target 'E310_RFNOC_sg3' failed
make: *** [E310_RFNOC_sg3] Error 2
Can you please point me what i did wrong ?
Best Regards.
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Hi Ramazan,
Running the Xilinx tools in a virtual machine will usually work, but you
can run into RAM issues. Trying it in normal environment is still a good
idea though.
Even though the Webpack edition is free, you still need to have a Webpack
license installed. You can generate one on Xilinx's website by creating an
account. I don't think the lack of a license is related to you issue
though. Make sure to only use 2017.4, as 2018.2 is not supported. Did you
download your installer from the Xilinx website? Xilinx posts a MD5 sum you
can use to make sure your download was not corrupted.
Jonathon
On Mon, Feb 4, 2019 at 4:06 PM Ramazan Çetin ramazan.cetin@gohm.com.tr
wrote:
Hi Jonathon,
I chowned ~/.Xilinx and other folder etc. it did not work. I installed
Vivado to another directory (/home/rcetin/opt/), it also did not work. I
got the same error. I am running all these things on virtual machine. Maybe
problem can be related with it. I also will try in real machine.
Do you know i should make something extra in Vivado 2017.4 Webpack
licencing (Webpack need no licence file it should directly work) ? And can
we use Vivado 2018.2 (I have full product licence on this program)?
Best regards.
On 3.02.2019 14:17, Jonathon Pendlum wrote:
Hi Ramazan,
I would give chowning both your Xilinx install and ~/.Xilinx to your
username a try. If that doesn't work, try reinstalling the Xilinx tools.
Jonathon
On Sun, Feb 3, 2019 at 4:49 PM Ramazan Çetin ramazan.cetin@gohm.com.tr
wrote:
Hi Jonathon,
Thank you for your answer. I have tried building default X310 image and
got this error.
make -f Makefile.x300.inc bin NAME=X310_HG ARCH=kintex7
PART_ID=xc7k410t/ffg900/-2 BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1
X310=1 TOP_MODULE=x300 EXTRA_DEFS="BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1
SFP1_10GBE=1 X310=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300'
BUILDER: Checking tools...
- GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.12
- Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP ten_gig_eth_pcs_pma
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
BUILDER: Retargeting IP to part kintex7/xc7k410t/ffg900/-2...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl
-log ten_gig_eth_pcs_pma.log -nojournal
[00:00:10] Current task: Initialization +++ Current Phase: Starting
WARNING: [Device 21-436] No parts matched 'xc7k410tffg900-2'
ERROR: [Coretcl 2-106] Specified part could not be found.
[00:00:10] Current task: Initialization +++ Current Phase: Finished
[00:00:10] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 0
Errors: 1
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/ip/ten_gig_eth_pcs_pma/Makefile.inc:41:
recipe for target
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300'
Makefile:72: recipe for target 'X310_HG' failed
make: *** [X310_HG] Error 2
I think it can be licence related problem. Because i installed webpack
version of Vivado (This version requires no licence)
When i try building default E310 image;
cd .../top/e300
source setupenv.sh
make E310_sg3
I got the same error as before.
make -f Makefile.e300.inc bin NAME=E310_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 E310=1 E3XX_SG3=1
EXTRA_DEFS="E310=1 E3XX_SG3=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300'
BUILDER: Checking tools...
- GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.12
- Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi4_to_axi3_protocol_converter
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl
-log axi4_to_axi3_protocol_converter.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
WARNING: [IP_Flow 19-4994] Overwriting existing constraint file
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter_ooc.xdc'
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:11] Current task: Initialization +++ Current Phase: Starting
[00:00:11] Current task: Initialization +++ Current Phase: Finished
[00:00:11] Executing Tcl: synth_design -top
axi4_to_axi3_protocol_converter -part xc7z020clg484-3 -mode out_of_context
[00:00:11] Starting Synthesis Command
ERROR: [filemgmt 56-148] @57j-140@
/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this command.
[00:00:12] Current task: Synthesis +++ Current Phase: Starting
ERROR: [Vivado 12-398] No designs are open
[00:00:12] Current task: Synthesis +++ Current Phase: Finished
[00:00:12] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/ip/axi4_to_axi3_protocol_converter/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter.xci]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300'
Makefile:60: recipe for target 'E310_sg3' failed
make: *** [E310_sg3] Error 2
The error says it cannot read ip file.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
I installed Xilinx Vivado using root privileges. Can the problem related
with privileges ? I think Webpack version is okay for E310 (No licence
reuires).
Thank you for your time.
Best regards.
On 3.02.2019 06:22, Jonathon Pendlum wrote:
Hi Ramazan,
I was able to build an E310 RFNoC image with a DDC and FFT block from
master (e57dfe075) on the FPGA repo, so I don't think there is an issue
with the code base. The error messages make me wonder if your Vivado
install is corrupt. Are you able to build any other images, such as the
default X310 image (i.e. run 'source setupenv.sh; make X310_HG' in the
fpga/usrp3/top/x300 dir)?
Jonathon
On Sun, Feb 3, 2019 at 6:53 AM Ramazan Çetin via USRP-users <
usrp-users@lists.ettus.com> wrote:
Hello all, (Sorry about multiple messages. I guess i had a problem about
my mail client)
I am trying to build custom FPGA image for E310 which includes DDC and
FFT.
I compiled and installed;
-
UHD master branch (using -DENABLE_RFNOC=ON)
-
gnuradio v3.7.13.4
-
gr-ettus master
After installing i have checked version of UHD.
UHD version: 3.14.0.0-0-gabf0db4e
Then according to instructions in this page :
https://kb.ettus.com/Getting_Started_with_RFNoC_Development
I cloned https://github.com/EttusResearch/fpga.git repo. I have Xilinx
Vivado 2017.4 webpack.
Then, I setup environment from fpga/usrp3/top/e300/setupenv.sh.
cd {USER_PREFIX}/fpga/usrp3/tools/scripts
./uhd_image_builder.py ddc fft -d e310 -t E310_RFNOC_sg3 -m 5
--fill-with-fifos
--Using the following blocks to generate image:
* ddc
* fft
Adding CE instantiation file for 'E310_RFNOC_sg3'
changing temporarily working directory to
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/../../top/e300
Setting up a 64-bit FPGA build environment for the USRP-E3x0...
- Vivado: Found (/opt/Xilinx/Vivado/2017.4/bin)
Environment successfully initialized.
make -f Makefile.e300.inc bin NAME=E310_RFNOC_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 RFNOC=1 E310=1
EXTRA_DEFS="RFNOC=1 E310=1"
make[1]: Entering directory '/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
BUILDER: Checking tools...
- GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.12
- Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi_dma_stream
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/viv_generate_ip.tcl -log
axi_dma_stream.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:13] Current task: Initialization +++ Current Phase: Starting
[00:00:13] Current task: Initialization +++ Current Phase: Finished
[00:00:13] Executing Tcl: synth_design -top axi_dma_stream -part
xc7z020clg484-3 -mode out_of_context
[00:00:13] Starting Synthesis Command
[00:00:13] Current task: Synthesis +++ Current Phase: Starting
ERROR: [filemgmt 56-148]
@57j-140@/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Common 17-53] User Exception: No open design. Please open an
elaborated, synthesized or implemented design before executing this
command.
ERROR: [Vivado 12-398] No designs are open
[00:00:14] Current task: Synthesis +++ Current Phase: Finished
[00:00:14] Process terminated. Status: Failure
---=======================
Warnings: 0
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/ip/axi_dma_stream/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci]
Error 1
make[1]: Leaving directory '/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
Makefile:70: recipe for target 'E310_RFNOC_sg3' failed
make: *** [E310_RFNOC_sg3] Error 2
Can you please point me what i did wrong ?
Best Regards.
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Hi Jonathon,
I installed offline version of Xilinx and checked its MD5sum. It
matches. But still it gave error.
Then i have installed Vivado using online installer. This time i could
compile FPGA image. So problem is solved. Thanks for your time and effort.
Best regards.
Ramazan
On 4.02.2019 10:56, Jonathon Pendlum wrote:
Hi Ramazan,
Running the Xilinx tools in a virtual machine will usually work, but
you can run into RAM issues. Trying it in normal environment is still
a good idea though.
Even though the Webpack edition is free, you still need to have a
Webpack license installed. You can generate one on Xilinx's website by
creating an account. I don't think the lack of a license is related to
you issue though. Make sure to only use 2017.4, as 2018.2 is not
supported. Did you download your installer from the Xilinx website?
Xilinx posts a MD5 sum you can use to make sure your download was not
corrupted.
Jonathon
On Mon, Feb 4, 2019 at 4:06 PM Ramazan Çetin
<ramazan.cetin@gohm.com.tr mailto:ramazan.cetin@gohm.com.tr> wrote:
Hi Jonathon,
I chowned ~/.Xilinx and other folder etc. it did not work. I
installed Vivado to another directory (/home/rcetin/opt/), it also
did not work. I got the same error. I am running all these things
on virtual machine. Maybe problem can be related with it. I also
will try in real machine.
Do you know i should make something extra in Vivado 2017.4 Webpack
licencing (Webpack need no licence file it should directly work) ?
And can we use Vivado 2018.2 (I have full product licence on this
program)?
Best regards.
On 3.02.2019 14:17, Jonathon Pendlum wrote:
Hi Ramazan,
I would give chowning both your Xilinx install and ~/.Xilinx to
your username a try. If that doesn't work, try reinstalling the
Xilinx tools.
Jonathon
On Sun, Feb 3, 2019 at 4:49 PM Ramazan Çetin
<ramazan.cetin@gohm.com.tr <mailto:ramazan.cetin@gohm.com.tr>> wrote:
Hi Jonathon,
Thank you for your answer. I have tried building default X310
image and got this error.
make -f Makefile.x300.inc bin NAME=X310_HG ARCH=kintex7
PART_ID=xc7k410t/ffg900/-2 BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1
SFP1_10GBE=1 X310=1 TOP_MODULE=x300 EXTRA_DEFS="BUILD_1G=1
BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 X310=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300'
BUILDER: Checking tools...
* GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
* Python 2.7.12
* Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP ten_gig_eth_pcs_pma
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
BUILDER: Retargeting IP to part kintex7/xc7k410t/ffg900/-2...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl
-log ten_gig_eth_pcs_pma.log -nojournal
[00:00:10] Current task: Initialization +++ Current Phase:
Starting
WARNING: [Device 21-436] No parts matched 'xc7k410tffg900-2'
ERROR: [Coretcl 2-106] Specified part could not be found.
[00:00:10] Current task: Initialization +++ Current Phase:
Finished
[00:00:10] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 0
Errors: 1
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/ip/ten_gig_eth_pcs_pma/Makefile.inc:41:
recipe for target
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/x300'
Makefile:72: recipe for target 'X310_HG' failed
make: *** [X310_HG] Error 2
I think it can be licence related problem. Because i
installed webpack version of Vivado (This version requires no
licence)
When i try building default E310 image;
cd .../top/e300
source setupenv.sh
make E310_sg3
I got the same error as before.
make -f Makefile.e300.inc bin NAME=E310_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 E310=1 E3XX_SG3=1
EXTRA_DEFS="E310=1 E3XX_SG3=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300'
BUILDER: Checking tools...
* GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
* Python 2.7.12
* Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi4_to_axi3_protocol_converter
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/tools/scripts/viv_generate_ip.tcl
-log axi4_to_axi3_protocol_converter.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
WARNING: [IP_Flow 19-4994] Overwriting existing constraint
file
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter_ooc.xdc'
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:11] Current task: Initialization +++ Current Phase:
Starting
[00:00:11] Current task: Initialization +++ Current Phase:
Finished
[00:00:11] Executing Tcl: synth_design -top
axi4_to_axi3_protocol_converter -part xc7z020clg484-3 -mode
out_of_context
[00:00:11] Starting Synthesis Command
ERROR: [filemgmt 56-148]
@57j-140@/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design. Please
open an elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please
open an elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please
open an elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please
open an elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please
open an elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design. Please
open an elaborated, synthesized or implemented design before
executing this command.
[00:00:12] Current task: Synthesis +++ Current Phase: Starting
ERROR: [Vivado 12-398] No designs are open
[00:00:12] Current task: Synthesis +++ Current Phase: Finished
[00:00:12] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter
/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/ip/axi4_to_axi3_protocol_converter/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300/build-ip/xc7z020clg484-3/axi4_to_axi3_protocol_converter/axi4_to_axi3_protocol_converter.xci]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/uhd/fpga-src/usrp3/top/e300'
Makefile:60: recipe for target 'E310_sg3' failed
make: *** [E310_sg3] Error 2
The error says it cannot read ip file.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
I installed Xilinx Vivado using root privileges. Can the
problem related with privileges ? I think Webpack version is
okay for E310 (No licence reuires).
Thank you for your time.
Best regards.
On 3.02.2019 06:22, Jonathon Pendlum wrote:
Hi Ramazan,
I was able to build an E310 RFNoC image with a DDC and FFT
block from master (e57dfe075) on the FPGA repo, so I don't
think there is an issue with the code base. The error
messages make me wonder if your Vivado install is corrupt.
Are you able to build any other images, such as the default
X310 image (i.e. run 'source setupenv.sh; make X310_HG' in
the fpga/usrp3/top/x300 dir)?
Jonathon
On Sun, Feb 3, 2019 at 6:53 AM Ramazan Çetin via USRP-users
<usrp-users@lists.ettus.com
<mailto:usrp-users@lists.ettus.com>> wrote:
Hello all, (Sorry about multiple messages. I guess i had
a problem about
my mail client)
I am trying to build custom FPGA image for E310 which
includes DDC and FFT.
I compiled and installed;
- UHD master branch (using -DENABLE_RFNOC=ON)
- gnuradio v3.7.13.4
- gr-ettus master
After installing i have checked version of UHD.
UHD version: 3.14.0.0-0-gabf0db4e
Then according to instructions in this page :
https://kb.ettus.com/Getting_Started_with_RFNoC_Development
I cloned https://github.com/EttusResearch/fpga.git repo.
I have Xilinx
Vivado 2017.4 webpack.
Then, I setup environment from
fpga/usrp3/top/e300/setupenv.sh.
cd {USER_PREFIX}/fpga/usrp3/tools/scripts
./uhd_image_builder.py ddc fft -d e310 -t E310_RFNOC_sg3
-m 5
--fill-with-fifos
--Using the following blocks to generate image:
* ddc
* fft
Adding CE instantiation file for 'E310_RFNOC_sg3'
changing temporarily working directory to
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/../../top/e300
Setting up a 64-bit FPGA build environment for the
USRP-E3x0...
- Vivado: Found (/opt/Xilinx/Vivado/2017.4/bin)
Environment successfully initialized.
make -f Makefile.e300.inc bin NAME=E310_RFNOC_sg3 ARCH=zynq
PART_ID=xc7z020/clg484/-3 TOP_MODULE=e300 RFNOC=1 E310=1
EXTRA_DEFS="RFNOC=1 E310=1"
make[1]: Entering directory
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
BUILDER: Checking tools...
* GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu)
* Python 2.7.12
* Vivado v2017.4 (64-bit)
---=======================
BUILDER: Building IP axi_dma_stream
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
BUILDER: Retargeting IP to part zynq/xc7z020/clg484/-3...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/rcetin/rfnoc/src/fpga/usrp3/tools/scripts/viv_generate_ip.tcl
-log
axi_dma_stream.log -nojournal
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/util_ds_buf_v2_1/component.xml.
This IP will not be included in the IP Catalog.
CRITICAL WARNING: [IP_Flow 19-1977] Unable to read IP file
/opt/Xilinx/Vivado/2017.4/data/rsb/iprepos/intf_aximm_v1_0/component.xml.
This IP will not be included in the IP Catalog.
[00:00:13] Current task: Initialization +++ Current
Phase: Starting
[00:00:13] Current task: Initialization +++ Current
Phase: Finished
[00:00:13] Executing Tcl: synth_design -top
axi_dma_stream -part
xc7z020clg484-3 -mode out_of_context
[00:00:13] Starting Synthesis Command
[00:00:13] Current task: Synthesis +++ Current Phase:
Starting
ERROR: [filemgmt 56-148]
@57j-140@/opt/Xilinx/Vivado/2017.4/data/ip/xpm/xpm_cdc/xpm_cdc.xml1
ERROR: [Common 17-53] User Exception: No open design.
Please open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design.
Please open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design.
Please open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design.
Please open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design.
Please open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Common 17-53] User Exception: No open design.
Please open an
elaborated, synthesized or implemented design before
executing this command.
ERROR: [Vivado 12-398] No designs are open
[00:00:14] Current task: Synthesis +++ Current Phase:
Finished
[00:00:14] Process terminated. Status: Failure
---=======================
Warnings: 0
Critical Warnings: 4
Errors: 8
BUILDER: Releasing IP location:
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream
/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/ip/axi_dma_stream/Makefile.inc:15:
recipe for target
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci'
failed
make[1]: ***
[/home/rcetin/rfnoc/src/fpga/usrp3/top/e300/build-ip/xc7z020clg484-3/axi_dma_stream/axi_dma_stream.xci]
Error 1
make[1]: Leaving directory
'/home/rcetin/rfnoc/src/fpga/usrp3/top/e300'
Makefile:70: recipe for target 'E310_RFNOC_sg3' failed
make: *** [E310_RFNOC_sg3] Error 2
Can you please point me what i did wrong ?
Best Regards.
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
<mailto:USRP-users@lists.ettus.com>
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com