pjsip_endpt_send_request_stateless and Route.
Hi,
I create an INVITE message with pjsip_endpt_create_request and I send it with pjsip_endpt_send_request_stateless. It's work.
When I had a route (Route: sip:172.16.0.4:5070;lr) before sending message, pjsip_endpt_create_request doesn't calculate the right target and send the message to the target of the Request line (INVITE sip:172.16.0.4:5065 SIP/2.0)
But pjsip_endpt_create_request should choose route as target ? No ? Is it a bug ?
I use PJSIP version 0,9
Thanks by advance for yours responses.
Regards,
Cédric.
Téléphonez gratuitement à tous vos proches avec Windows Live Messenger ! Téléchargez-le maintenant !
http://www.windowslive.fr/messenger/1.asp
Why pjsip_endpt_send_request_stateless function don't use header Route as target to send the SIP message ?
Cédric.
From: levequecedric@hotmail.comTo: pjsip@lists.pjsip.orgDate: Thu, 20 Nov 2008 12:25:36 +0100Subject: [pjsip] pjsip_endpt_send_request_stateless and Route.
Hi, I create an INVITE message with pjsip_endpt_create_request and I send it with pjsip_endpt_send_request_stateless. It's work. When I had a route (Route: sip:172.16.0.4:5070;lr) before sending message, pjsip_endpt_create_request doesn't calculate the right target and send the message to the target of the Request line (INVITE sip:172.16.0.4:5065 SIP/2.0) But pjsip_endpt_create_request should choose route as target ? No ? Is it a bug ? I use PJSIP version 0,9 Thanks by advance for yours responses. Regards,Cédric.
Discutez sur Messenger où que vous soyez ! Mettez Messenger sur votre mobile !
Email envoyé avec Windows Live Hotmail. Dites adieux aux spam et virus, passez à Hotmail ! C'est gratuit !
http://www.windowslive.fr/hotmail/default.asp
maybe you need take a look at pjsip doc. if you want pjsip stack to handle
route set directly, you had better to use pjsip-ua api
Or use high level pjsua api.
regards,
Gang
On Mon, Nov 24, 2008 at 4:25 PM, cedric leveque
levequecedric@hotmail.comwrote:
Why pjsip_endpt_send_request_stateless function don't use header Route as
target to send the SIP message ?
Cédric.
From: levequecedric@hotmail.com
To: pjsip@lists.pjsip.org
Date: Thu, 20 Nov 2008 12:25:36 +0100
Subject: [pjsip] pjsip_endpt_send_request_stateless and Route.
Hi,
I create an INVITE message with pjsip_endpt_create_request and I send it
with pjsip_endpt_send_request_stateless. It's work.
When I had a route (Route: sip:172.16.0.4:5070;lr) before sending message,
pjsip_endpt_create_request doesn't calculate the right target and send the
message to the target of the Request line (INVITE sip:172.16.0.4:5065SIP/2.0)
But pjsip_endpt_create_request should choose route as target ? No ? Is it a
bug ?
I use PJSIP version 0,9
Thanks by advance for yours responses.
Regards,
Cédric.
Discutez sur Messenger où que vous soyez ! Mettez Messenger sur votre
mobile ! http://www.messengersurvotremobile.com/
Qui vous permet d'enregistrer la TV sur votre PC et lire vos emails sur
votre mobile ? la réponse en vidéo la réponse en vidéohttp://www.microsoft.com/france/windows/bts/default.mspx
Visit our blog: http://blog.pjsip.org
pjsip mailing list
pjsip@lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
Thanks for you're response.
But in pjsip doc we can read that the pjsip_endpt_send_request_stateless function get the target to send message thanks to Request Line and Route Header.
So May be there is a bug. I have passed on version 1.0 but I always have the same problems.
It seems that high level API like PJSUA or PJSIPUA don't use this function, but pjsip_transport_send. So may be only few users use this function, and this bug has not been see before.
I create an INVITE message with a route (because of an outbound proxy) adding in the tdata.
Same operation but for response (pjsip_endpt_send_response2) works fine, may be because of the via header ?
I have rewrite my own function for sending message. In fact I don't need application obtain target from Request Line or Header Route because I know it thanks to an other Way. So I just use pjsip_endpt_acquire_method and pjsip_transport_send.
I can't use pjsip high level API because I need to control all message I received and send. Module as Invite Session managed some message like Prack and don't give me the hand on this.
Dialog are too rigid, I need more possibility to modify session. For example, dialog not allow modification of the route setting after initialisation. But my application need to modify it.
During a session SIP my application make a hard hand-over. I need to keep session active and modify the route use for this dialog because application send message to an outbound proxy in destination of the callee.
So I manage message out of dialog and transaction, and I create my own dialog.
regards,
Cédric.
Date: Wed, 26 Nov 2008 00:50:13 +0800From: gangban.lau@gmail.comTo: pjsip@lists.pjsip.orgSubject: Re: [pjsip] Why pjsip_endpt_send_request_stateless function don't use header Route as target to send the SIP message ?maybe you need take a look at pjsip doc. if you want pjsip stack to handle route set directly, you had better to use pjsip-ua apiOr use high level pjsua api.regards,Gang
On Mon, Nov 24, 2008 at 4:25 PM, cedric leveque levequecedric@hotmail.com wrote:
Why pjsip_endpt_send_request_stateless function don't use header Route as target to send the SIP message ? Cédric.
From: levequecedric@hotmail.comTo: pjsip@lists.pjsip.orgDate: Thu, 20 Nov 2008 12:25:36 +0100Subject: [pjsip] pjsip_endpt_send_request_stateless and Route.Hi, I create an INVITE message with pjsip_endpt_create_request and I send it with pjsip_endpt_send_request_stateless. It's work. When I had a route (Route: sip:172.16.0.4:5070;lr) before sending message, pjsip_endpt_create_request doesn't calculate the right target and send the message to the target of the Request line (INVITE sip:172.16.0.4:5065 SIP/2.0) But pjsip_endpt_create_request should choose route as target ? No ? Is it a bug ? I use PJSIP version 0,9 Thanks by advance for yours responses. Regards,Cédric.
Discutez sur Messenger où que vous soyez ! Mettez Messenger sur votre mobile !
Qui vous permet d'enregistrer la TV sur votre PC et lire vos emails sur votre mobile ? la réponse en vidéo la réponse en vidéo_______________________________________________Visit our blog: http://blog.pjsip.orgpjsip mailing listpjsip@lists.pjsip.orghttp://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
Email envoyé avec Windows Live Hotmail. Dites adieux aux spam et virus, passez à Hotmail ! C'est gratuit !
http://www.windowslive.fr/hotmail/default.asp
pjsip_endpt_send_stateless() func will call pjsip_process_route_set() to get
right destination.
But I didn't try this func() yeah.
regards,
Gang
On Wed, Nov 26, 2008 at 3:22 AM, cedric leveque
levequecedric@hotmail.comwrote:
Thanks for you're response.
But in pjsip doc we can read that the pjsip_endpt_send_request_stateless
function get the target to send message thanks to Request Line and Route
Header.
So May be there is a bug. I have passed on version 1.0 but I always have
the same problems.
It seems that high level API like PJSUA or PJSIPUA don't use this function,
but pjsip_transport_send. So may be only few users use this function, and
this bug has not been see before.
I create an INVITE message with a route (because of an outbound proxy)
adding in the tdata.
Same operation but for response (pjsip_endpt_send_response2) works fine,
may be because of the via header ?
I have rewrite my own function for sending message. In fact I don't need
application obtain target from Request Line or Header Route because I know
it thanks to an other Way. So I just use pjsip_endpt_acquire_method and
pjsip_transport_send.
I can't use pjsip high level API because I need to control all message I
received and send. Module as Invite Session managed some message like Prack
and don't give me the hand on this.
Dialog are too rigid, I need more possibility to modify session. For
example, dialog not allow modification of the route setting after
initialisation. But my application need to modify it.
During a session SIP my application make a hard hand-over. I need to keep
session active and modify the route use for this dialog because application
send message to an outbound proxy in destination of the callee.
So I manage message out of dialog and transaction, and I create my own
dialog.
regards,
Cédric.
Date: Wed, 26 Nov 2008 00:50:13 +0800
From: gangban.lau@gmail.com
To: pjsip@lists.pjsip.org
Subject: Re: [pjsip] Why pjsip_endpt_send_request_stateless function don't
use header Route as target to send the SIP message ?
maybe you need take a look at pjsip doc. if you want pjsip stack to handle
route set directly, you had better to use pjsip-ua api
Or use high level pjsua api.
regards,
Gang
On Mon, Nov 24, 2008 at 4:25 PM, cedric leveque <levequecedric@hotmail.com
wrote:
Why pjsip_endpt_send_request_stateless function don't use header Route as
target to send the SIP message ?
Cédric.
From: levequecedric@hotmail.com
To: pjsip@lists.pjsip.org
Date: Thu, 20 Nov 2008 12:25:36 +0100
Subject: [pjsip] pjsip_endpt_send_request_stateless and Route.
Hi,
I create an INVITE message with pjsip_endpt_create_request and I send it
with pjsip_endpt_send_request_stateless. It's work.
When I had a route (Route: sip:172.16.0.4:5070;lr) before sending message,
pjsip_endpt_create_request doesn't calculate the right target and send the
message to the target of the Request line (INVITE sip:172.16.0.4:5065SIP/2.0)
But pjsip_endpt_create_request should choose route as target ? No ? Is it a
bug ?
I use PJSIP version 0,9
Thanks by advance for yours responses.
Regards,
Cédric.
Discutez sur Messenger où que vous soyez ! Mettez Messenger sur votre
mobile ! http://www.messengersurvotremobile.com/
Qui vous permet d'enregistrer la TV sur votre PC et lire vos emails sur
votre mobile ? la réponse en vidéo la réponse en vidéohttp://www.microsoft.com/france/windows/bts/default.mspx
Visit our blog: http://blog.pjsip.org
pjsip mailing list
pjsip@lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
Qui vous permet d'enregistrer la TV sur votre PC et lire vos emails sur
votre mobile ? la réponse en vidéo la réponse en vidéohttp://www.microsoft.com/france/windows/bts/default.mspx
Visit our blog: http://blog.pjsip.org
pjsip mailing list
pjsip@lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
Thanks for your response.
I think I will stay with my own send function. It work well, and I'll may be need managed multiple network interface for dispatching message.
regards,
Cédric.
Date: Wed, 26 Nov 2008 18:54:24 +0800From: gangban.lau@gmail.comTo: pjsip@lists.pjsip.orgSubject: Re: [pjsip] Why pjsip_endpt_send_request_stateless function don't use header Route as target to send the SIP message ?pjsip_endpt_send_stateless() func will call pjsip_process_route_set() to get right destination.But I didn't try this func() yeah.regards,Gang
On Wed, Nov 26, 2008 at 3:22 AM, cedric leveque levequecedric@hotmail.com wrote:
Thanks for you're response. But in pjsip doc we can read that the pjsip_endpt_send_request_stateless function get the target to send message thanks to Request Line and Route Header.So May be there is a bug. I have passed on version 1.0 but I always have the same problems.It seems that high level API like PJSUA or PJSIPUA don't use this function, but pjsip_transport_send. So may be only few users use this function, and this bug has not been see before.I create an INVITE message with a route (because of an outbound proxy) adding in the tdata.Same operation but for response (pjsip_endpt_send_response2) works fine, may be because of the via header ? I have rewrite my own function for sending message. In fact I don't need application obtain target from Request Line or Header Route because I know it thanks to an other Way. So I just use pjsip_endpt_acquire_method and pjsip_transport_send. I can't use pjsip high level API because I need to control all message I received and send. Module as Invite Session managed some message like Prack and don't give me the hand on this. Dialog are too rigid, I need more possibility to modify session. For example, dialog not allow modification of the route setting after initialisation. But my application need to modify it.During a session SIP my application make a hard hand-over. I need to keep session active and modify the route use for this dialog because application send message to an outbound proxy in destination of the callee. So I manage message out of dialog and transaction, and I create my own dialog. regards,Cédric.
Date: Wed, 26 Nov 2008 00:50:13 +0800From: gangban.lau@gmail.comTo: pjsip@lists.pjsip.orgSubject: Re: [pjsip] Why pjsip_endpt_send_request_stateless function don't use header Route as target to send the SIP message ?maybe you need take a look at pjsip doc. if you want pjsip stack to handle route set directly, you had better to use pjsip-ua apiOr use high level pjsua api.regards,Gang
On Mon, Nov 24, 2008 at 4:25 PM, cedric leveque levequecedric@hotmail.com wrote:
Why pjsip_endpt_send_request_stateless function don't use header Route as target to send the SIP message ? Cédric.
From: levequecedric@hotmail.comTo: pjsip@lists.pjsip.orgDate: Thu, 20 Nov 2008 12:25:36 +0100Subject: [pjsip] pjsip_endpt_send_request_stateless and Route.Hi, I create an INVITE message with pjsip_endpt_create_request and I send it with pjsip_endpt_send_request_stateless. It's work. When I had a route (Route: sip:172.16.0.4:5070;lr) before sending message, pjsip_endpt_create_request doesn't calculate the right target and send the message to the target of the Request line (INVITE sip:172.16.0.4:5065 SIP/2.0) But pjsip_endpt_create_request should choose route as target ? No ? Is it a bug ? I use PJSIP version 0,9 Thanks by advance for yours responses. Regards,Cédric.
Discutez sur Messenger où que vous soyez ! Mettez Messenger sur votre mobile !
Qui vous permet d'enregistrer la TV sur votre PC et lire vos emails sur votre mobile ? la réponse en vidéo la réponse en vidéo_______________________________________________Visit our blog: http://blog.pjsip.orgpjsip mailing listpjsip@lists.pjsip.orghttp://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
Qui vous permet d'enregistrer la TV sur votre PC et lire vos emails sur votre mobile ? la réponse en vidéo la réponse en vidéo_______________________________________________Visit our blog: http://blog.pjsip.orgpjsip mailing listpjsip@lists.pjsip.orghttp://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
Téléphonez gratuitement à tous vos proches avec Windows Live Messenger ! Téléchargez-le maintenant !
http://www.windowslive.fr/messenger/1.asp