Hello All, I have some question that I would appreciate if someone could help with. 1. I am trying to make gnuradio works with wxgui in my E110. I know that the opkg package doesn't support that, but I would like to have a wxgui on my USRP. 2. I think I have two versions of UHD on my USRP, I installed the latest one which is 3.7, but I think when I deleted and then reinstall the gnu radio from the opkg it installed UHD 3.5. I want to know from where I can fix this " what directory" so I would delete it manually if it is not going to cause problems. The issue is that I was trying to make the spec_analyzer.py works on my system and it refused until I did the reinstallation. However, when I tried other examples such as the tx_waveforms it fails to see the UHD version which is 3.5! Thanks and I do appreciate the help ________________________________ The information transmitted and available in this message is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged information/material. If you are not the intended recipient or have received this e-mail in error, you must not read, use or disseminate the information and must promptly notify the sender via e-mail or over the telephone and delete this e-mail immediately. Although this email and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by ADASI for any loss or damage arising in any way from its use.

On 09/23/2014 06:02 AM, Shamma Al Marzooqi via USRP-users wrote: > Hello All, > > I have some question that I would appreciate if someone could help with. > 1. I am trying to make gnuradio works with wxgui in my E110. I know that the opkg package doesn't support that, but I would like to have a wxgui on my USRP. I haven't tried this. I suspect you can build wxwidgets and wxpython on the E100 and it should work. > 2. I think I have two versions of UHD on my USRP, I installed the latest one which is 3.7, but I think when I deleted and then reinstall the gnu radio from the opkg it installed UHD 3.5. I want to know from where I can fix this " what directory" so I would delete it manually if it is not going to cause problems. The issue is that I was trying to make the spec_analyzer.py works on my system and it refused until I did the reinstallation. However, when I tried other examples such as the tx_waveforms it fails to see the UHD version which is 3.5! > Why do you need to update uhd? Is this for daughterboard support? Philip > Thanks and I do appreciate the help > > > > ________________________________ > > The information transmitted and available in this message is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged information/material. If you are not the intended recipient or have received this e-mail in error, you must not read, use or disseminate the information and must promptly notify the sender via e-mail or over the telephone and delete this e-mail immediately. Although this email and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by ADASI for any loss or damage arising in any way from its use. > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >