JM
Jason Matusiak
Wed, Mar 9, 2016 5:07 PM
Is there an STL for a case for the B200 mini? I have a pair on their
way to me and thought I would give the 3D printer a few cycles of work
while I wait. All I can find right now is Tim's version for sale, I was
hoping that someone had the STL files for free download somewhere.
Is there an STL for a case for the B200 mini? I have a pair on their
way to me and thought I would give the 3D printer a few cycles of work
while I wait. All I can find right now is Tim's version for sale, I was
hoping that someone had the STL files for free download somewhere.
JM
Jason Matusiak
Wed, Mar 9, 2016 5:12 PM
Is there an STL for a case for the B200 mini? I have a pair on their
way to me and thought I would give the 3D printer a
few cycles of work while I wait. All I can find right now is Tim's
version for sale, I was hoping that someone had the STL files
for free download somewhere.
NM, user error (as usual with me). If you create an account with
shapeways, you can then see the link that Tim supplied to download the
STL files (there is no link if you aren't logged in which is what threw
me off).
> Is there an STL for a case for the B200 mini? I have a pair on their
way to me and thought I would give the 3D printer a
> few cycles of work while I wait. All I can find right now is Tim's
version for sale, I was hoping that someone had the STL files
> for free download somewhere.
NM, user error (as usual with me). If you create an account with
shapeways, you can then see the link that Tim supplied to download the
STL files (there is no link if you aren't logged in which is what threw
me off).
RC
Robin Coxe
Wed, Mar 9, 2016 5:17 PM
Ettus Research is working on a low-cost enclosure for the USRP B200mini
series. The design is complete and we are getting some prototypes built
right now. We intend to offer it for sale sometime this summer.
-Robin
On Wed, Mar 9, 2016 at 9:12 AM, Jason Matusiak via USRP-users <
usrp-users@lists.ettus.com> wrote:
Is there an STL for a case for the B200 mini? I have a pair on their
way to me and thought I would give the 3D printer a
few cycles of work while I wait. All I can find right now is Tim's
version for sale, I was hoping that someone had the STL files
for free download somewhere.
Ettus Research is working on a low-cost enclosure for the USRP B200mini
series. The design is complete and we are getting some prototypes built
right now. We intend to offer it for sale sometime this summer.
-Robin
On Wed, Mar 9, 2016 at 9:12 AM, Jason Matusiak via USRP-users <
usrp-users@lists.ettus.com> wrote:
> > Is there an STL for a case for the B200 mini? I have a pair on their
> way to me and thought I would give the 3D printer a
> > few cycles of work while I wait. All I can find right now is Tim's
> version for sale, I was hoping that someone had the STL files
> > for free download somewhere.
> NM, user error (as usual with me). If you create an account with
> shapeways, you can then see the link that Tim supplied to download the STL
> files (there is no link if you aren't logged in which is what threw me off).
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
SK
Steven Knudsen
Thu, Mar 10, 2016 5:29 PM
Hi,
This is the case I designed and use. Feedback is very, very welcome.
http://www.thingiverse.com/thing:1405739 <http://www.thingiverse.com/thing:1405739>
Steven Knudsen, Ph.D., P.Eng.
www. techconficio.ca <http://techconficio.ca/>
www.linkedin.com/in/knudstevenknudsen <http://www.linkedin.com/in/knudstevenknudsen>
Der entscheidende Augenblick der menschlichen Entwicklung ist immerwährend. Darum sind die revolutionären geistigen Bewegungen, welche alles Frühere für nichtig erklären, im Recht, denn es ist noch nichts geschehen. - Franz Kafka
> On Mar 9, 2016, at 10:07, Jason Matusiak via USRP-users <usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote:
>
> Is there an STL for a case for the B200 mini? I have a pair on their way to me and thought I would give the 3D printer a few cycles of work while I wait. All I can find right now is Tim's version for sale, I was hoping that someone had the STL files for free download somewhere.
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Steven Knudsen, Ph.D., P.Eng.
www. techconficio.ca
www.linkedin.com/in/knudstevenknudsen
All the wires are cut, my friends
Live beyond the severed ends. Louis MacNeice
JM
Jason Matusiak
Wed, Mar 16, 2016 2:40 PM
This is the case I designed and use. Feedback is very, very welcome.
I printed this up and tried it with my new minis that just came in and
it works perfectly. I had some alignment issues with Tim's version, but
yours seems to have the right fit. I haven't fired it up to see how the
heat dissipation is through your vents, but I was impressed with
everything else up to this point. Thanks!
> This is the case I designed and use. Feedback is very, very welcome.
I printed this up and tried it with my new minis that just came in and
it works perfectly. I had some alignment issues with Tim's version, but
yours seems to have the right fit. I haven't fired it up to see how the
heat dissipation is through your vents, but I was impressed with
everything else up to this point. Thanks!
SK
Steven Knudsen
Wed, Mar 16, 2016 4:10 PM
Hey Jason,
That’s super that it actually worked without a tweak. To be honest, I had to file (lightly), the break-away nibs on the B200mini PCB, but then it was tight.
I’ve transmitted for about an hour at 50 dB gain and there is only a slightly warm feel to the unit. I think if it got anywhere near the 160-180C melting/softening point of the PLA, I’d notice.
Regardless, if you would like any changes and don’t feel like doing it yourself, let me know. For example, if someone wanted a “logo” vent, like you see on some Raspberry Pi enclosures, that might be possible. I was just being lazy with my vents.
ta,
steven
Steven Knudsen, Ph.D., P.Eng.
www. techconficio.ca
www.linkedin.com/in/knudstevenknudsen
Der entscheidende Augenblick der menschlichen Entwicklung ist immerwährend. Darum sind die revolutionären geistigen Bewegungen, welche alles Frühere für nichtig erklären, im Recht, denn es ist noch nichts geschehen. - Franz Kafka
This is the case I designed and use. Feedback is very, very welcome.
I printed this up and tried it with my new minis that just came in and it works perfectly. I had some alignment issues with Tim's version, but yours seems to have the right fit. I haven't fired it up to see how the heat dissipation is through your vents, but I was impressed with everything else up to this point. Thanks!
Hey Jason,
That’s super that it actually worked without a tweak. To be honest, I had to file (lightly), the break-away nibs on the B200mini PCB, but then it was tight.
I’ve transmitted for about an hour at 50 dB gain and there is only a slightly warm feel to the unit. I think if it got anywhere near the 160-180C melting/softening point of the PLA, I’d notice.
Regardless, if you would like any changes and don’t feel like doing it yourself, let me know. For example, if someone wanted a “logo” vent, like you see on some Raspberry Pi enclosures, that might be possible. I was just being lazy with my vents.
ta,
steven
Steven Knudsen, Ph.D., P.Eng.
www. techconficio.ca
www.linkedin.com/in/knudstevenknudsen
Der entscheidende Augenblick der menschlichen Entwicklung ist immerwährend. Darum sind die revolutionären geistigen Bewegungen, welche alles Frühere für nichtig erklären, im Recht, denn es ist noch nichts geschehen. - Franz Kafka
> On Mar 16, 2016, at 08:40, Jason Matusiak <jason@gardettoengineering.com> wrote:
>
> > This is the case I designed and use. Feedback is very, very welcome.
>
> I printed this up and tried it with my new minis that just came in and it works perfectly. I had some alignment issues with Tim's version, but yours seems to have the right fit. I haven't fired it up to see how the heat dissipation is through your vents, but I was impressed with everything else up to this point. Thanks!
JM
Jason Matusiak
Wed, Mar 16, 2016 4:15 PM
Regardless, if you would like any changes and don’t feel like doing
it yourself, let me know. For example, if someone wanted
a “logo” vent, like you see on some Raspberry Pi enclosures, that
might be possible. I was just being lazy with my vents.
Steven, I actually just noticed something that might be unique to me.
When I plug one of my USB3 cables into the device, the casing doesn't
fit over the plug. I believe that this is the cable that comes with the
unit. Have you had any issues with that?
> Regardless, if you would like any changes and don’t feel like doing
it yourself, let me know. For example, if someone wanted
> a “logo” vent, like you see on some Raspberry Pi enclosures, that
might be possible. I was just being lazy with my vents.
Steven, I actually just noticed something that might be unique to me.
When I plug one of my USB3 cables into the device, the casing doesn't
fit over the plug. I believe that this is the cable that comes with the
unit. Have you had any issues with that?
