Hi Does anyone have the specification or pin out on a Efratom PN 105243-003 10 MHz Crystal Oscillator. It was part of a Lucent RFG-XO. Any help would be appreciated greatly. Thank you Al White N0TVJ

Al: I have some information gleaned from eBay sales about this part, I can not vouch for the accuracy. The part is available on eBay, under either the Datum or Efratom brand, with suffixes -001, -002, or -003. From RDR Electronics on eBay: "The oven status pin goes low when the oven is warm (probably open collector). Don't know what the total range of the EFC is, but it seems to sit around 4.5 volts. We measured the EFC sensitivity at 5.75x10e-7/volt (5.75Hz/volt)." ".jpg" of pinout attached. Don't know if this reflector strips off attachments, so I will also copy you directly. --- Graham / KE9H == Al N0tvj wrote: > Hi > > Does anyone have the specification or pin out on a > > Efratom PN 105243-003 10 MHz Crystal Oscillator. > > It was part of a Lucent RFG-XO. > > Any help would be appreciated greatly. > > Thank you > > Al White N0TVJ > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > >

Some info here: http://www.n4iqt.com/rfgmxo/ Stanley ----- Original Message ---- From: Al N0tvj <n0tvj@atmc.net> To: time-nuts@febo.com Sent: Monday, April 20, 2009 10:39:04 AM Subject: [time-nuts] Question on aEfratom 10 Mhz Osc Hi Does anyone have the specification or pin out on a Efratom PN 105243-003  10 MHz Crystal Oscillator. It was part of a Lucent RFG-XO. Any help would be appreciated greatly. Thank you Al White N0TVJ _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.