Hello,

I have one of these units and it will never die, try fair radio in Lima OH.

Allan Bart>

From: Bruce Lanning blanning@acadia.net

Thanks Allan for the response. I have the HP-5245L and the HP-5262A Time
Interval Unit, but it is not working. Problems in the PS and the front
handle on the right side is broken off. I had planned to use this unit for
frequency comparison, but not sure this is what I want. Your comments would
be appreciated.
Bruce W1GBS

----- Original Message -----
From: "Allan W. Bart, Jr." allanba@verizon.net
To: "Discussion of precise time and frequency measurement"
time-nuts@febo.com
Sent: Wednesday, May 24, 2006 2:22 PM
Subject: Re: [time-nuts] HP-5245L Parts

Bruce Lanning wrote:

Bruce,

I have a 5245L parts unit with which I keep my main 5245L running. The
parts unit is an older blue one with a bad xtal oven. I already
borrowed a power supply pass transistor from it. I also borrowed one
of the counter/display boards.

Let me know what parts you need for the PS and I'll send em over for
the price of shipping if I have them. The right side metal is
available too, but I don't know how hard it is to extract. It's
probably not too bad. I'll take a look at it.

--David Forbes
Tucson AZ

Thanks David for the fast response. Your offer is very generous. I would
like to accept it. I need the PS board A-7 and the right side with the front
handle on it. I think the left side is the same as the right side. Let me
know about the shipping charges and your address.  I will send you the funds
along with my
address.
thanks again David,
Bruce W1GBS

----- Original Message -----
From: "David Forbes" dforbes@dakotacom.net
To: "Discussion of precise time and frequency measurement"
time-nuts@febo.com
Sent: Wednesday, May 24, 2006 3:44 PM
Subject: Re: [time-nuts] HP-5245L Parts