Hi, I'm working on an Efratom MRT rubidium standard and I need the power supply schematic. Everything is working OK except the battery charge circuit is not working. With good batteries you can pull the AC cord and it runs on the batteries OK, but then when you plug the AC back in the charge current (with very discharged batteries) is very low. The batteries charge fine if a bench supply is used instead of the MRT supply. Anyone have a copy of the manual or can supply the schematic of the power supply and charger? Thanks, Corby Dawson ____________________________________________________________ Criminal Lawyers - Click here. http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3oGdgUSMCXb8nALpcWDYwVWGvlod18EcSO0mdpEPQlyYZoHX/

Hi Time-Nuts I am new to this group, but have been aware of Time-Nuts for years. Someone may already have done this, but if not we should host a data base of manuals and notes for time and freq products and perhaps data on different products members have characterized. I would be willing to share any manuals I have and pitch in a little towards a hosting site to build on what is already an invaluable resource. Best Wishes; Thomas Knox NIST 4475 Whitney Place Boulder Colorado 80305 1-303-554-0307 tomknox@nist.gov Quoting "Corby Dawson" <cdelect@juno.com>: > Hi, > > I'm working on an Efratom MRT rubidium standard and I need the power > supply schematic. > > Everything is working OK except the battery charge circuit is not > working. > > With good batteries you can pull the AC cord and it runs on the batteries > OK, but then when you plug the AC back in the charge current (with very > discharged batteries) is very low. The batteries charge fine if a bench > supply is used instead of the MRT supply. > > Anyone have a copy of the manual or can supply the schematic of the power > supply and charger? > > Thanks, > > Corby Dawson > ____________________________________________________________ > Criminal Lawyers - Click here. > http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3oGdgUSMCXb8nALpcWDYwVWGvlod18EcSO0mdpEPQlyYZoHX/ > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >

tomknox@nist.gov wrote: > Hi Time-Nuts > I am new to this group, but have been aware of Time-Nuts for years. > Someone may already have done this, but if not we should host a data > base of manuals and notes for time and freq products and perhaps data > on different products members have characterized. I would be willing > to share any manuals I have and pitch in a little towards a hosting > site to build on what is already an invaluable resource. > Best Wishes; > Thomas Knox > NIST > 4475 Whitney Place > Boulder Colorado 80305 > 1-303-554-0307 > tomknox@nist.gov > > > Thomas Didier already hosts a collection of manuals on his site: www.ko4bb.com <http://www.k04bb.com> Bruce

http://www.ko4bb.com/cgi-bin/manuals.pl Didier KO4BB > -----Original Message----- > From: time-nuts-bounces@febo.com > [mailto:time-nuts-bounces@febo.com] On Behalf Of tomknox@nist.gov > Sent: Saturday, November 01, 2008 5:29 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] Efratom MRT schematic > > Hi Time-Nuts > I am new to this group, but have been aware of Time-Nuts for years. > Someone may already have done this, but if not we should host > a data base of manuals and notes for time and freq products > and perhaps data on different products members have > characterized. I would be willing to share any manuals I have > and pitch in a little towards a hosting site to build on what > is already an invaluable resource. > Best Wishes; > Thomas Knox > NIST > 4475 Whitney Place > Boulder Colorado 80305 > 1-303-554-0307 > tomknox@nist.gov > > > > Quoting "Corby Dawson" <cdelect@juno.com>: > > > Hi, > > > > I'm working on an Efratom MRT rubidium standard and I need > the power > > supply schematic. > > > > Everything is working OK except the battery charge circuit is not > > working. > > > > With good batteries you can pull the AC cord and it runs on the > > batteries OK, but then when you plug the AC back in the > charge current > > (with very discharged batteries) is very low. The batteries charge > > fine if a bench supply is used instead of the MRT supply. > > > > Anyone have a copy of the manual or can supply the schematic of the > > power supply and charger? > > > > Thanks, > > > > Corby Dawson > > ____________________________________________________________ > > Criminal Lawyers - Click here. > > > http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3oGdgUSMCXb8nALpcWDY > > wVWGvlod18EcSO0mdpEPQlyYZoHX/ > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, > go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.

There is also, www.to-way.com for time-nut related stuff. Hadley, K7MLR At 03:29 PM 11/1/2008, you wrote: >Hi Time-Nuts >I am new to this group, but have been aware of Time-Nuts for years. >Someone may already have done this, but if not we should host a data >base of manuals and notes for time and freq products and perhaps data >on different products members have characterized. I would be willing >to share any manuals I have and pitch in a little towards a hosting >site to build on what is already an invaluable resource. >Best Wishes; >Thomas Knox >NIST >4475 Whitney Place >Boulder Colorado 80305 >1-303-554-0307 >tomknox@nist.gov > > > >Quoting "Corby Dawson" <cdelect@juno.com>: > > > Hi, > > > > I'm working on an Efratom MRT rubidium standard and I need the power > > supply schematic. > > > > Everything is working OK except the battery charge circuit is not > > working. > > > > With good batteries you can pull the AC cord and it runs on the batteries > > OK, but then when you plug the AC back in the charge current (with very > > discharged batteries) is very low. The batteries charge fine if a bench > > supply is used instead of the MRT supply. > > > > Anyone have a copy of the manual or can supply the schematic of the power > > supply and charger? > > > > Thanks, > > > > Corby Dawson > > ____________________________________________________________ > > Criminal Lawyers - Click here. > > > http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3oGdgUSMCXb8nALpcWDYwVWGvlod18EcSO0mdpEPQlyYZoHX/ > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > >_______________________________________________ >time-nuts mailing list -- time-nuts@febo.com >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there.