time-nuts@lists.febo.com

Discussion of precise time and frequency measurement

View all threads

Re: [time-nuts] Z3801 Replacement GPS Receiver Card

DK
Dan Kemppainen
Tue, Sep 18, 2012 12:24 PM

On 9/17/2012 6:03 PM, time-nuts-request@febo.com wrote:

OK, you can test a VP Oncore GPS receiver alone if you have a mean to
translate the TTL serial port to a regular RS232 for the PC. This can be
done with a MAX232 chip (or equivalent). Then the pinout (refer to the

FYI, I've had really good luck with these over the years:
http://www.digikey.com/product-detail/en/TTL-232R-5V/768-1028-ND/2003493
http://www.digikey.com/product-detail/en/TTL-232R-3V3/768-1015-ND/1836393

The big thing is the drivers are really well written. The seem to be
able to talk to anything I point them at. Never found any software
they don't like (yet) ...

I keep a few around, just in case.

Dan

On 9/17/2012 6:03 PM, time-nuts-request@febo.com wrote: > OK, you can test a VP Oncore GPS receiver alone if you have a mean to > translate the TTL serial port to a regular RS232 for the PC. This can be > done with a MAX232 chip (or equivalent). Then the pinout (refer to the FYI, I've had really good luck with these over the years: http://www.digikey.com/product-detail/en/TTL-232R-5V/768-1028-ND/2003493 http://www.digikey.com/product-detail/en/TTL-232R-3V3/768-1015-ND/1836393 The big thing is the drivers are really well written. The seem to be able to talk to anything I point them at. Never found any software they don't like (yet) ... I keep a few around, just in case. Dan
DL
Don Latham
Tue, Sep 18, 2012 3:35 PM

TTL to USB serial adapters on ebay for very reasonable.
Don

Dan Kemppainen

On 9/17/2012 6:03 PM, time-nuts-request@febo.com wrote:

OK, you can test a VP Oncore GPS receiver alone if you have a mean to
translate the TTL serial port to a regular RS232 for the PC. This can
be
done with a MAX232 chip (or equivalent). Then the pinout (refer to the

FYI, I've had really good luck with these over the years:
http://www.digikey.com/product-detail/en/TTL-232R-5V/768-1028-ND/2003493
http://www.digikey.com/product-detail/en/TTL-232R-3V3/768-1015-ND/1836393

The big thing is the drivers are really well written. The seem to be
able to talk to anything I point them at. Never found any software
they don't like (yet) ...

I keep a few around, just in case.

Dan


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

--
"Neither the voice of authority nor the weight of reason and argument
are as significant as experiment, for thence comes quiet to the mind."
De Erroribus Medicorum, R. Bacon, 13th century.
"If you don't know what it is, don't poke it."
Ghost in the Shell

Dr. Don Latham AJ7LL
Six Mile Systems LLP
17850 Six Mile Road
POB 134
Huson, MT, 59846
VOX 406-626-4304
www.lightningforensics.com
www.sixmilesystems.com

TTL to USB serial adapters on ebay for very reasonable. Don Dan Kemppainen > > On 9/17/2012 6:03 PM, time-nuts-request@febo.com wrote: >> OK, you can test a VP Oncore GPS receiver alone if you have a mean to >> translate the TTL serial port to a regular RS232 for the PC. This can >> be >> done with a MAX232 chip (or equivalent). Then the pinout (refer to the > > FYI, I've had really good luck with these over the years: > http://www.digikey.com/product-detail/en/TTL-232R-5V/768-1028-ND/2003493 > http://www.digikey.com/product-detail/en/TTL-232R-3V3/768-1015-ND/1836393 > > The big thing is the drivers are really well written. The seem to be > able to talk to anything I point them at. Never found any software > they don't like (yet) ... > > I keep a few around, just in case. > > Dan > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > -- "Neither the voice of authority nor the weight of reason and argument are as significant as experiment, for thence comes quiet to the mind." De Erroribus Medicorum, R. Bacon, 13th century. "If you don't know what it is, don't poke it." Ghost in the Shell Dr. Don Latham AJ7LL Six Mile Systems LLP 17850 Six Mile Road POB 134 Huson, MT, 59846 VOX 406-626-4304 www.lightningforensics.com www.sixmilesystems.com
BC
Bob Camp
Tue, Sep 18, 2012 4:24 PM

Hi

If you go the eBay route, the FTDI chip set (as mentioned in the links
below) is very much the one you want to get. There are several other chip
sets out there. I have yet to see one that's as solid as the FTDI's.

Bob

-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of Don Latham
Sent: Tuesday, September 18, 2012 11:35 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Z3801 Replacement GPS Receiver Card

TTL to USB serial adapters on ebay for very reasonable.
Don

Dan Kemppainen

On 9/17/2012 6:03 PM, time-nuts-request@febo.com wrote:

OK, you can test a VP Oncore GPS receiver alone if you have a mean to
translate the TTL serial port to a regular RS232 for the PC. This can
be
done with a MAX232 chip (or equivalent). Then the pinout (refer to the

FYI, I've had really good luck with these over the years:
http://www.digikey.com/product-detail/en/TTL-232R-5V/768-1028-ND/2003493
http://www.digikey.com/product-detail/en/TTL-232R-3V3/768-1015-ND/1836393

The big thing is the drivers are really well written. The seem to be
able to talk to anything I point them at. Never found any software
they don't like (yet) ...

I keep a few around, just in case.

Dan


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

--
"Neither the voice of authority nor the weight of reason and argument
are as significant as experiment, for thence comes quiet to the mind."
De Erroribus Medicorum, R. Bacon, 13th century.
"If you don't know what it is, don't poke it."
Ghost in the Shell

Dr. Don Latham AJ7LL
Six Mile Systems LLP
17850 Six Mile Road
POB 134
Huson, MT, 59846
VOX 406-626-4304
www.lightningforensics.com
www.sixmilesystems.com


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Hi If you go the eBay route, the FTDI chip set (as mentioned in the links below) is very much the one you want to get. There are several other chip sets out there. I have yet to see one that's as solid as the FTDI's. Bob -----Original Message----- From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On Behalf Of Don Latham Sent: Tuesday, September 18, 2012 11:35 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Z3801 Replacement GPS Receiver Card TTL to USB serial adapters on ebay for very reasonable. Don Dan Kemppainen > > On 9/17/2012 6:03 PM, time-nuts-request@febo.com wrote: >> OK, you can test a VP Oncore GPS receiver alone if you have a mean to >> translate the TTL serial port to a regular RS232 for the PC. This can >> be >> done with a MAX232 chip (or equivalent). Then the pinout (refer to the > > FYI, I've had really good luck with these over the years: > http://www.digikey.com/product-detail/en/TTL-232R-5V/768-1028-ND/2003493 > http://www.digikey.com/product-detail/en/TTL-232R-3V3/768-1015-ND/1836393 > > The big thing is the drivers are really well written. The seem to be > able to talk to anything I point them at. Never found any software > they don't like (yet) ... > > I keep a few around, just in case. > > Dan > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > -- "Neither the voice of authority nor the weight of reason and argument are as significant as experiment, for thence comes quiet to the mind." De Erroribus Medicorum, R. Bacon, 13th century. "If you don't know what it is, don't poke it." Ghost in the Shell Dr. Don Latham AJ7LL Six Mile Systems LLP 17850 Six Mile Road POB 134 Huson, MT, 59846 VOX 406-626-4304 www.lightningforensics.com www.sixmilesystems.com _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
MM
Mike Millen
Tue, Sep 18, 2012 5:14 PM

Dan Kemppainen wrote:

On 9/17/2012 6:03 PM, time-nuts-request@febo.com wrote:

OK, you can test a VP Oncore GPS receiver alone if you have a mean to
translate the TTL serial port to a regular RS232 for the PC. This
can be done with a MAX232 chip (or equivalent). Then the pinout
(refer to the

FYI, I've had really good luck with these over the years:
http://www.digikey.com/product-detail/en/TTL-232R-5V/768-1028-ND/2003493
http://www.digikey.com/product-detail/en/TTL-232R-3V3/768-1015-ND/1836393

The big thing is the drivers are really well written. The seem to be
able to talk to anything I point them at. Never found any software
they don't like (yet) ...

Even better... using the free programming utility on their website you can
set the data lines (& handshaking if you need) to inverted.

Then there's no need to add an inverting stage to the VP UART.

Mike

Dan Kemppainen wrote: > On 9/17/2012 6:03 PM, time-nuts-request@febo.com wrote: >> OK, you can test a VP Oncore GPS receiver alone if you have a mean to >> translate the TTL serial port to a regular RS232 for the PC. This >> can be done with a MAX232 chip (or equivalent). Then the pinout >> (refer to the > > FYI, I've had really good luck with these over the years: > http://www.digikey.com/product-detail/en/TTL-232R-5V/768-1028-ND/2003493 > http://www.digikey.com/product-detail/en/TTL-232R-3V3/768-1015-ND/1836393 > > The big thing is the drivers are really well written. The seem to be > able to talk to anything I point them at. Never found any software > they don't like (yet) ... Even better... using the free programming utility on their website you can set the data lines (& handshaking if you need) to inverted. Then there's no need to add an inverting stage to the VP UART. Mike