ghane0@gmail.com said: > Me too, please. Something with a PPS, and an RS-232 output, withour > soldering. I don't know of any low cost no-soldering solutions. -- These are my opinions. I hate spam.

Hi Not much of a market for that sort of stuff. Bob On Nov 15, 2012, at 5:59 PM, Hal Murray <hmurray@megapathdsl.net> wrote: > > ghane0@gmail.com said: >> Me too, please. Something with a PPS, and an RS-232 output, withour >> soldering. > > I don't know of any low cost no-soldering solutions. > > > -- > These are my opinions. I hate spam. > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.

On 11/15/12 4:10 PM, Bob Camp wrote: > Hi > > Not much of a market for that sort of stuff. > > Bob > Big enough that Synergy & Garmin have pricing for anywhere from 1 to 1000 units

Hi ….. but not at the same sort of price as a consumer grade GPS. Bob On Nov 15, 2012, at 7:27 PM, Jim Lux <jimlux@earthlink.net> wrote: > On 11/15/12 4:10 PM, Bob Camp wrote: >> Hi >> >> Not much of a market for that sort of stuff. >> >> Bob >> > > Big enough that Synergy & Garmin have pricing for anywhere from 1 to 1000 units > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.

There seems to be a nascent market for small GPS receivers in the "DIY drone" hobbyist sector. I stuffed one of the modules from http://store.diydrones.com/category_s/10.htm (more info at http://store.diydrones.com/3DR_GPS_LEA_6_p/br-3drlea-6.htm ) into a small plastic project box and added a USB cable to the appropriate pins on the LEA-6H module. In this case I wanted NMEA data rather than 1-pps, but 1-pps is available as well. At the time I was looking, I didn't see a simple, ready-to-go receiver module that had an antenna at one end and a USB virtual COM port on the other. Fortunately the LEA-6H's USB output worked great when I added the cable. -- john Miles Design LLC > -----Original Message----- > From: time-nuts-bounces@febo.com [mailto:time-nuts- > bounces@febo.com] On Behalf Of Bob Camp > Sent: Thursday, November 15, 2012 4:10 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] Inexpensive modular gps with 1pps > > Hi > > Not much of a market for that sort of stuff. > > Bob > > On Nov 15, 2012, at 5:59 PM, Hal Murray <hmurray@megapathdsl.net> > wrote: > > > > > ghane0@gmail.com said: > >> Me too, please. Something with a PPS, and an RS-232 output, withour > >> soldering. > > > > I don't know of any low cost no-soldering solutions. > > > > > > -- > > These are my opinions. I hate spam. > > > > > > > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to https://www.febo.com/cgi- > bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi- > bin/mailman/listinfo/time-nuts > and follow the instructions there.