Are you sure the pin spacing is 0.125 inch?
The smallest pin spacing I have seen for 0.050 inch square pins is 0.156
inch spacing, which is a common system.
Or, if you can download the print for the exact Nemic Lambda supply, it is
likely they will include the part number for the mating connectors.
--- Graham
==
On Sun, May 28, 2023 at 3:42 PM Mahlon Haunschild via time-nuts <
time-nuts@lists.febo.com> wrote:
Can any of you help me identify a mating connector for this? It has .050"
square pins on .125" centers, with an outer locking tab. I'm more of a
MIL-DTL-38999 sorta guy. This is on the Nemic Lambda supply that I might
retrofit into my Z3801A.
Thanks in advance.
Mahlon - N4ZK
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe send an email to time-nuts-leave@lists.febo.com
Are you sure the pin spacing is 0.125 inch?
The smallest pin spacing I have seen for 0.050 inch square pins is 0.156
inch spacing, which is a common system.
Or, if you can download the print for the exact Nemic Lambda supply, it is
likely they will include the part number for the mating connectors.
--- Graham
==
On Sun, May 28, 2023 at 3:42 PM Mahlon Haunschild via time-nuts <
time-nuts@lists.febo.com> wrote:
> Can any of you help me identify a mating connector for this? It has .050"
> square pins on .125" centers, with an outer locking tab. I'm more of a
> MIL-DTL-38999 sorta guy. This is on the Nemic Lambda supply that I might
> retrofit into my Z3801A.
>
> Thanks in advance.
>
> Mahlon - N4ZK
> _______________________________________________
> time-nuts mailing list -- time-nuts@lists.febo.com
> To unsubscribe send an email to time-nuts-leave@lists.febo.com
