Hello, Is it possible to connect a X300 device to a 10Gb/s BaseT network using the SFP+ to RJ45 adaptator ? I do this test but I am unablme to ping the device (using 192.168.40.2 ip on port 1) regards, Olivier

Hi Olivier, all this is basically standard Ethernet, so it *should* work. Do the link indicator LEDs on the USRP blink? Best regards, Marcus On Mon, 2020-02-03 at 12:14 +0100, Olivier Ravard via USRP-users wrote: > Hello, > > Is it possible to connect a X300 device to a 10Gb/s BaseT network > using the SFP+ to RJ45 > adaptator ? > > I do this test but I am unablme to ping the device (using > 192.168.40.2 ip on port 1) > > regards, > > Olivier > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

The green led at the back of the device (port 1) is on and the second on (orange) blink some times. The "link" led at the front of the device not blink. The result of ethtool on the linux machine for this interface is the following:         Supported ports: [ TP ]         Supported link modes:   1000baseT/Full                                 10000baseT/Full         Supported pause frame use: Symmetric Receive-only         Supports auto-negotiation: Yes         Supported FEC modes: Not reported         Advertised link modes:  1000baseT/Full                                 10000baseT/Full         Advertised pause frame use: Symmetric         Advertised auto-negotiation: Yes         Advertised FEC modes: Not reported         Speed: 1000Mb/s         Duplex: Full         Port: Twisted Pair         PHYAD: 12         Transceiver: internal         Auto-negotiation: on         MDI-X: Unknown         Supports Wake-on: g         Wake-on: g         Current message level: 0x00000000 (0)                                        Link detected: yes It seems that only 1000 Mb/s is negociated. Olivier Ravard NovaGrid S.A.S. Le 03/02/2020 à 12:20, Marcus Müller a écrit : > Hi Olivier, > > all this is basically standard Ethernet, so it *should* work. > Do the link indicator LEDs on the USRP blink? > > Best regards, > Marcus > On Mon, 2020-02-03 at 12:14 +0100, Olivier Ravard via USRP-users wrote: >> Hello, >> >> Is it possible to connect a X300 device to a 10Gb/s BaseT network >> using the SFP+ to RJ45 >> adaptator ? >> >> I do this test but I am unablme to ping the device (using >> 192.168.40.2 ip on port 1) >> >> regards, >> >> Olivier >> >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

      Supported ports: [ TP ]
      Supported link modes:   1000baseT/Full
                              10000baseT/Full
      Supported pause frame use: Symmetric Receive-only
      Supports auto-negotiation: Yes
      Supported FEC modes: Not reported
      Advertised link modes:  1000baseT/Full
                              10000baseT/Full
      Advertised pause frame use: Symmetric
      Advertised auto-negotiation: Yes
      Advertised FEC modes: Not reported
      Speed: 1000Mb/s
      Duplex: Full
      Port: Twisted Pair
      PHYAD: 12
      Transceiver: internal
      Auto-negotiation: on
      MDI-X: Unknown
      Supports Wake-on: g
      Wake-on: g
      Current message level: 0x00000000 (0)
                            
      Link detected: yes

On 02/03/2020 06:36 AM, Olivier Ravard via USRP-users wrote: > The green led at the back of the device (port 1) is on and the second on (orange) blink > some times. > The "link" led at the front of the device not blink. > > The result of ethtool on the linux machine for this interface is the following: > > > Supported ports: [ TP ] > Supported link modes: 1000baseT/Full > 10000baseT/Full > Supported pause frame use: Symmetric Receive-only > Supports auto-negotiation: Yes > Supported FEC modes: Not reported > Advertised link modes: 1000baseT/Full > 10000baseT/Full > Advertised pause frame use: Symmetric > Advertised auto-negotiation: Yes > Advertised FEC modes: Not reported > Speed: 1000Mb/s > Duplex: Full > Port: Twisted Pair > PHYAD: 12 > Transceiver: internal > Auto-negotiation: on > MDI-X: Unknown > Supports Wake-on: g > Wake-on: g > Current message level: 0x00000000 (0) > > Link detected: yes > > It seems that only 1000 Mb/s is negociated. > > Olivier Ravard > NovaGrid S.A.S. > What type of SFP-to-RJ45 module do you have? Are you sure that it is designed for 10GBaseT? What type of cable are you using?

Le 03/02/2020 à 17:45, Marcus D. Leech via USRP-users a écrit : > On 02/03/2020 06:36 AM, Olivier Ravard via USRP-users wrote: >> The green led at the back of the device (port 1) is on and the second on (orange) blink >> some times. >> The "link" led at the front of the device not blink. >> >> The result of ethtool on the linux machine for this interface is the following: >> >> >>          Supported ports: [ TP ] >>          Supported link modes:   1000baseT/Full >>                                  10000baseT/Full >>          Supported pause frame use: Symmetric Receive-only >>          Supports auto-negotiation: Yes >>          Supported FEC modes: Not reported >>          Advertised link modes:  1000baseT/Full >>                                  10000baseT/Full >>          Advertised pause frame use: Symmetric >>          Advertised auto-negotiation: Yes >>          Advertised FEC modes: Not reported >>          Speed: 1000Mb/s >>          Duplex: Full >>          Port: Twisted Pair >>          PHYAD: 12 >>          Transceiver: internal >>          Auto-negotiation: on >>          MDI-X: Unknown >>          Supports Wake-on: g >>          Wake-on: g >>          Current message level: 0x00000000 (0) >>                                         Link detected: yes >> >> It seems that only 1000 Mb/s is negociated. >> >> Olivier Ravard >> NovaGrid S.A.S. >> > What type of SFP-to-RJ45 module do you have?  Are you sure that it is designed for > 10GBaseT?  What type of cable are you using? I am using the SFP-to-RJ45 module provided by ettus. It seems that it is specified only for 1GB/s. I will test with better adaptators. > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

      Supported ports: [ TP ]
      Supported link modes:   1000baseT/Full
                              10000baseT/Full
      Supported pause frame use: Symmetric Receive-only
      Supports auto-negotiation: Yes
      Supported FEC modes: Not reported
      Advertised link modes:  1000baseT/Full
                              10000baseT/Full
      Advertised pause frame use: Symmetric
      Advertised auto-negotiation: Yes
      Advertised FEC modes: Not reported
      Speed: 1000Mb/s
      Duplex: Full
      Port: Twisted Pair
      PHYAD: 12
      Transceiver: internal
      Auto-negotiation: on
      MDI-X: Unknown
      Supports Wake-on: g
      Wake-on: g
      Current message level: 0x00000000 (0)
                                     Link detected: yes

Ah, my bad, I was assuming you had a 10GBase-T SFP+ module. Sorry for the confusion. On Tue, 2020-02-04 at 09:26 +0100, Olivier Ravard via USRP-users wrote: > Le 03/02/2020 à 17:45, Marcus D. Leech via USRP-users a écrit : > > On 02/03/2020 06:36 AM, Olivier Ravard via USRP-users wrote: > > > The green led at the back of the device (port 1) is on and the > > > second on (orange) blink > > > some times. > > > The "link" led at the front of the device not blink. > > > > > > The result of ethtool on the linux machine for this interface is > > > the following: > > > > > > > > > Supported ports: [ TP ] > > > Supported link modes: 1000baseT/Full > > > 10000baseT/Full > > > Supported pause frame use: Symmetric Receive-only > > > Supports auto-negotiation: Yes > > > Supported FEC modes: Not reported > > > Advertised link modes: 1000baseT/Full > > > 10000baseT/Full > > > Advertised pause frame use: Symmetric > > > Advertised auto-negotiation: Yes > > > Advertised FEC modes: Not reported > > > Speed: 1000Mb/s > > > Duplex: Full > > > Port: Twisted Pair > > > PHYAD: 12 > > > Transceiver: internal > > > Auto-negotiation: on > > > MDI-X: Unknown > > > Supports Wake-on: g > > > Wake-on: g > > > Current message level: 0x00000000 (0) > > > Link detected: yes > > > > > > It seems that only 1000 Mb/s is negociated. > > > > > > Olivier Ravard > > > NovaGrid S.A.S. > > > > > What type of SFP-to-RJ45 module do you have? Are you sure that it > > is designed for > > 10GBaseT? What type of cable are you using? > I am using the SFP-to-RJ45 module provided by ettus. It seems that it > is specified only > for 1GB/s. I will test with > better adaptators. > > > > > > _______________________________________________ > > USRP-users mailing list > > USRP-users@lists.ettus.com > > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

      Supported ports: [ TP ]
      Supported link modes:   1000baseT/Full
                              10000baseT/Full
      Supported pause frame use: Symmetric Receive-only
      Supports auto-negotiation: Yes
      Supported FEC modes: Not reported
      Advertised link modes:  1000baseT/Full
                              10000baseT/Full
      Advertised pause frame use: Symmetric
      Advertised auto-negotiation: Yes
      Advertised FEC modes: Not reported
      Speed: 1000Mb/s
      Duplex: Full
      Port: Twisted Pair
      PHYAD: 12
      Transceiver: internal
      Auto-negotiation: on
      MDI-X: Unknown
      Supports Wake-on: g
      Wake-on: g
      Current message level: 0x00000000 (0)
                                     Link detected: yes

an information: using a 10Gb/s SFP+ to RJ45 module,  it works. Thanks for your help. Olivier Le 04/02/2020 à 11:20, Marcus Müller a écrit : > Ah, my bad, I was assuming you had a 10GBase-T SFP+ module. Sorry for > the confusion. > On Tue, 2020-02-04 at 09:26 +0100, Olivier Ravard via USRP-users wrote: >> Le 03/02/2020 à 17:45, Marcus D. Leech via USRP-users a écrit : >>> On 02/03/2020 06:36 AM, Olivier Ravard via USRP-users wrote: >>>> The green led at the back of the device (port 1) is on and the >>>> second on (orange) blink >>>> some times. >>>> The "link" led at the front of the device not blink. >>>> >>>> The result of ethtool on the linux machine for this interface is >>>> the following: >>>> >>>> >>>> Supported ports: [ TP ] >>>> Supported link modes: 1000baseT/Full >>>> 10000baseT/Full >>>> Supported pause frame use: Symmetric Receive-only >>>> Supports auto-negotiation: Yes >>>> Supported FEC modes: Not reported >>>> Advertised link modes: 1000baseT/Full >>>> 10000baseT/Full >>>> Advertised pause frame use: Symmetric >>>> Advertised auto-negotiation: Yes >>>> Advertised FEC modes: Not reported >>>> Speed: 1000Mb/s >>>> Duplex: Full >>>> Port: Twisted Pair >>>> PHYAD: 12 >>>> Transceiver: internal >>>> Auto-negotiation: on >>>> MDI-X: Unknown >>>> Supports Wake-on: g >>>> Wake-on: g >>>> Current message level: 0x00000000 (0) >>>> Link detected: yes >>>> >>>> It seems that only 1000 Mb/s is negociated. >>>> >>>> Olivier Ravard >>>> NovaGrid S.A.S. >>>> >>> What type of SFP-to-RJ45 module do you have? Are you sure that it >>> is designed for >>> 10GBaseT? What type of cable are you using? >> I am using the SFP-to-RJ45 module provided by ettus. It seems that it >> is specified only >> for 1GB/s. I will test with >> better adaptators. >>> >>> _______________________________________________ >>> USRP-users mailing list >>> USRP-users@lists.ettus.com >>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com