I recently observed that the LCD screen on my Datum / Symmetricom TS2100 is BLANK (all green, no black data display). It will be a few weeks until troubleshooting issue (?? voltage, backlighting, dead LCD). Has anyone been down this path earlier. Known LCD swap/replacement — IF it is bad? greg, w9gb chicago

Gregory It seems that LCD displays have a pot to set contrast. If this is the case with your potentially the pot has gone flakey. A simple readjust may clear up the issue. Good luck Paul WB8TSL On Wed, Oct 11, 2023 at 12:27 PM Gregory Beat via time-nuts < time-nuts@lists.febo.com> wrote: > I recently observed that the LCD screen on my Datum / Symmetricom TS2100 > is BLANK (all green, no black data display). > > It will be a few weeks until troubleshooting issue (?? voltage, > backlighting, dead LCD). > Has anyone been down this path earlier. Known LCD swap/replacement — IF > it is bad? > > greg, w9gb > chicago > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe send an email to time-nuts-leave@lists.febo.com