usrp-users@lists.ettus.com
Discussion and technical support related to USRP, UHD, RFNoC
View all threadsRe: [USRP-users] USRP-users Digest, Vol 106, Issue 21
Dear all,
I would work on the X310 with Vivado Xilinx.
I have dowloaded all requirements but when I tried with make X310_RFNOC_HG,
I have the following error message:
make X310_RFNOC_HG
make -f Makefile.x300.inc bin NAME=X310_RFNOC_HG ARCH=kintex7
PART_ID=xc7k410t/ffg900/-2 BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1
RFNOC=1 X310=1 TOP_MODULE=x300 EXTRA_DEFS="BUILD_1G=1 BUILD_10G=1
SFP0_1GBE=1 SFP1_10GBE=1 RFNOC=1 X310=1"
make[1]: Entering directory
'/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300'
BUILDER: Checking tools...
- GNU bash, version 4.4.19(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.15rc1
- Vivado v2018.3 (64-bit)
---=======================
BUILDER: Building IP ten_gig_eth_pcs_pma
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
BUILDER: Retargeting IP to part kintex7/xc7k410t/ffg900/-2...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/tools/scripts/viv_generate_ip.tcl
-log ten_gig_eth_pcs_pma.log -nojournal
WARNING: [Device 21-436] No parts matched 'xc7k410tffg900-2'
ERROR: [Coretcl 2-106] Specified part could not be found.
[00:00:06] Current task: Initialization +++ Current Phase: Starting
[00:00:06] Current task: Initialization +++ Current Phase: Finished
[00:00:06] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 0
Errors: 1
BUILDER: Releasing IP location:
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/ip/ten_gig_eth_pcs_pma/Makefile.inc:41:
recipe for target
'/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out'
failed
make[1]: ***
[/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out]
Error 1
make[1]: Leaving directory
'/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300'
Makefile:112: recipe for target 'X310_RFNOC_HG' failed
make: *** [X310_RFNOC_HG] Error 2
Could you help me?
Is it a licence problem?
I have installed the WebPACK 2018.3.
Thank you in advance.
Best Regards,
Simona
Il giorno gio 20 giu 2019 alle ore 17:00 usrp-users-request@lists.ettus.com
ha scritto:
Send USRP-users mailing list submissions to
usrp-users@lists.ettus.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
or, via email, send a message with subject or body 'help' to
usrp-users-request@lists.ettus.com
You can reach the person managing the list at
usrp-users-owner@lists.ettus.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of USRP-users digest..."
Today's Topics:
1. E320 with larger SD card (Jason Matusiak)
2. Re: E320 with larger SD card (Marcus D. Leech)
3. Re: E320 with larger SD card (Jason Matusiak)
4. Re: E320 with larger SD card (Nate Temple)
5. Re: RFNoC multi-driven nets (Mitch Davis)
6. Re: Registering Block Controllers to UHD (Christian Valledor)
7. Re: RFNoC multi-driven nets (Roberto Michio Marques Kagami)
8. Re: Waveform Shape Not Accurate (Marcus D. Leech)
9. RX/TX on 4 channels on N310 (Jessica Iwamoto)
- Re: RX/TX on 4 channels on N310 (Nate Temple)
- Re: RX/TX on 4 channels on N310 (Ali Dormiani)
- Receiving response packets via UHD (Nick Foster)
- Re: E320 with larger SD card (Chris Gobbett)
- Re: E320 with larger SD card (Jason Matusiak)
- Re: E320 with larger SD card (Chris Gobbett)
- Re: E320 with larger SD card (Jason Matusiak)
- USRP gain refers to which amplifier (Koyel Das (Vehere))
- unsubscribe (Fabian Schwartau)
- Re: USRP gain refers to which amplifier (Marcus D. Leech)
- Re: E320 with larger SD card (Jason Matusiak)
- unsubscribe (Zhihong Luo)
Message: 1
Date: Wed, 19 Jun 2019 16:29:38 +0000
From: Jason Matusiak jason@gardettoengineering.com
To: Ettus Mail List usrp-users@lists.ettus.com
Subject: [USRP-users] E320 with larger SD card
Message-ID:
<
BL0PR12MB23409479CB3FBD5B7DCAAC19AFE50@BL0PR12MB2340.namprd12.prod.outlook.com
Content-Type: text/plain; charset="iso-8859-1"
I wanted to use a larger SD card than the one that as supplied, but I am
having issues. I loaded up the card, and then extended the data partition
to use up the rest of the free space (about 100GB). But then it doesn't
boot.
I am wondering if the change to a partition size screwed up something in a
config file somewhere. Is there a way to fix this without rebuilding a
docker image? I am using the UHD 3.14.0.0. that has the smaller data
partition (UHD 3.14.1.0 has a larger data partition, but doesn't include
any GR/python packages, so I need to use the older image).
Thanks.
Simona,
I suggest sending just the one email and then waiting on a response. It could take hours or a few days, but people on here generally are super helpful where they can.
Do you have a Vivado license? You are definitely going to need one for the X310 build (the webpack won't work).
Have you read through this link, it is very helpful: https://kb.ettus.com/Getting_Started_with_RFNoC_Development
From: USRP-users usrp-users-bounces@lists.ettus.com on behalf of Simona Sibio via USRP-users usrp-users@lists.ettus.com
Sent: Friday, June 21, 2019 7:43 AM
To: USRP Users
Subject: Re: [USRP-users] USRP-users Digest, Vol 106, Issue 21
Dear all,
I would work on the X310 with Vivado Xilinx.
I have dowloaded all requirements but when I tried with make X310_RFNOC_HG, I have the following error message:
make X310_RFNOC_HG
make -f Makefile.x300.inc bin NAME=X310_RFNOC_HG ARCH=kintex7 PART_ID=xc7k410t/ffg900/-2 BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 RFNOC=1 X310=1 TOP_MODULE=x300 EXTRA_DEFS="BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 RFNOC=1 X310=1"
make[1]: Entering directory '/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300'
BUILDER: Checking tools...
- GNU bash, version 4.4.19(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.15rc1
- Vivado v2018.3 (64-bit)
---=======================
BUILDER: Building IP ten_gig_eth_pcs_pma
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location: /home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
BUILDER: Retargeting IP to part kintex7/xc7k410t/ffg900/-2...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source /home/uwave-lab/Documents/Vivado/fpga-master/usrp3/tools/scripts/viv_generate_ip.tcl -log ten_gig_eth_pcs_pma.log -nojournal
WARNING: [Device 21-436] No parts matched 'xc7k410tffg900-2'
ERROR: [Coretcl 2-106] Specified part could not be found.
[00:00:06] Current task: Initialization +++ Current Phase: Starting
[00:00:06] Current task: Initialization +++ Current Phase: Finished
[00:00:06] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 0
Errors: 1
BUILDER: Releasing IP location: /home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/ip/ten_gig_eth_pcs_pma/Makefile.inc:41: recipe for target '/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out' failed
make[1]: *** [/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out] Error 1
make[1]: Leaving directory '/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300'
Makefile:112: recipe for target 'X310_RFNOC_HG' failed
make: *** [X310_RFNOC_HG] Error 2
Could you help me?
Is it a licence problem?
I have installed the WebPACK 2018.3.
Thank you in advance.
Best Regards,
Simona
Il giorno gio 20 giu 2019 alle ore 17:00 <usrp-users-request@lists.ettus.commailto:usrp-users-request@lists.ettus.com> ha scritto:
Send USRP-users mailing list submissions to
usrp-users@lists.ettus.commailto:usrp-users@lists.ettus.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
or, via email, send a message with subject or body 'help' to
usrp-users-request@lists.ettus.commailto:usrp-users-request@lists.ettus.com
You can reach the person managing the list at
usrp-users-owner@lists.ettus.commailto:usrp-users-owner@lists.ettus.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of USRP-users digest..."
Today's Topics:
- E320 with larger SD card (Jason Matusiak)
- Re: E320 with larger SD card (Marcus D. Leech)
- Re: E320 with larger SD card (Jason Matusiak)
- Re: E320 with larger SD card (Nate Temple)
- Re: RFNoC multi-driven nets (Mitch Davis)
- Re: Registering Block Controllers to UHD (Christian Valledor)
- Re: RFNoC multi-driven nets (Roberto Michio Marques Kagami)
- Re: Waveform Shape Not Accurate (Marcus D. Leech)
- RX/TX on 4 channels on N310 (Jessica Iwamoto)
- Re: RX/TX on 4 channels on N310 (Nate Temple)
- Re: RX/TX on 4 channels on N310 (Ali Dormiani)
- Receiving response packets via UHD (Nick Foster)
- Re: E320 with larger SD card (Chris Gobbett)
- Re: E320 with larger SD card (Jason Matusiak)
- Re: E320 with larger SD card (Chris Gobbett)
- Re: E320 with larger SD card (Jason Matusiak)
- USRP gain refers to which amplifier (Koyel Das (Vehere))
- unsubscribe (Fabian Schwartau)
- Re: USRP gain refers to which amplifier (Marcus D. Leech)
- Re: E320 with larger SD card (Jason Matusiak)
- unsubscribe (Zhihong Luo)
Message: 1
Date: Wed, 19 Jun 2019 16:29:38 +0000
From: Jason Matusiak <jason@gardettoengineering.commailto:jason@gardettoengineering.com>
To: Ettus Mail List <usrp-users@lists.ettus.commailto:usrp-users@lists.ettus.com>
Subject: [USRP-users] E320 with larger SD card
Message-ID:
<BL0PR12MB23409479CB3FBD5B7DCAAC19AFE50@BL0PR12MB2340.namprd12.prod.outlook.commailto:BL0PR12MB23409479CB3FBD5B7DCAAC19AFE50@BL0PR12MB2340.namprd12.prod.outlook.com>
Content-Type: text/plain; charset="iso-8859-1"
I wanted to use a larger SD card than the one that as supplied, but I am having issues. I loaded up the card, and then extended the data partition to use up the rest of the free space (about 100GB). But then it doesn't boot.
I am wondering if the change to a partition size screwed up something in a config file somewhere. Is there a way to fix this without rebuilding a docker image? I am using the UHD 3.14.0.0. that has the smaller data partition (UHD 3.14.1.0 has a larger data partition, but doesn't include any GR/python packages, so I need to use the older image).
Thanks.
On 06/21/2019 07:43 AM, Simona Sibio via USRP-users wrote:
Dear all,
I would work on the X310 with Vivado Xilinx.
I have dowloaded all requirements but when I tried with make
X310_RFNOC_HG, I have the following error message:
make X310_RFNOC_HG
make -f Makefile.x300.inc bin NAME=X310_RFNOC_HG ARCH=kintex7
PART_ID=xc7k410t/ffg900/-2 BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1
SFP1_10GBE=1 RFNOC=1 X310=1 TOP_MODULE=x300 EXTRA_DEFS="BUILD_1G=1
BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 RFNOC=1 X310=1"
make[1]: Entering directory
'/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300'
BUILDER: Checking tools...
- GNU bash, version 4.4.19(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.15rc1
- Vivado v2018.3 (64-bit)
---=======================
BUILDER: Building IP ten_gig_eth_pcs_pma
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
BUILDER: Retargeting IP to part kintex7/xc7k410t/ffg900/-2...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/tools/scripts/viv_generate_ip.tcl
-log ten_gig_eth_pcs_pma.log -nojournal
WARNING: [Device 21-436] No parts matched 'xc7k410tffg900-2'
ERROR: [Coretcl 2-106] Specified part could not be found.
[00:00:06] Current task: Initialization +++ Current Phase: Starting
[00:00:06] Current task: Initialization +++ Current Phase: Finished
[00:00:06] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 0
Errors: 1
BUILDER: Releasing IP location:
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/ip/ten_gig_eth_pcs_pma/Makefile.inc:41:
recipe for target
'/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out'
failed
make[1]: ***
[/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out]
Error 1
make[1]: Leaving directory
'/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300'
Makefile:112: recipe for target 'X310_RFNOC_HG' failed
make: *** [X310_RFNOC_HG] Error 2
Could you help me?
Is it a licence problem?
I have installed the WebPACK 2018.3.
Thank you in advance.
Best Regards,
Simona
The WebPack (Free) edition DOES NOT SUPPORT those devices. You need a
paid Vivado license.
Dear Jason,
Thank you for your reply and sorry for second email.
I thought that with first email, I had made a mistake and for this reason,
I sent other email.
Is there a way to get the licence for Design Edition or System Edition for
student?
And, the project in Vivado corrisponds at the image?
Thank you in advance, and sorry again.
Best Regards,
Simona
Il giorno ven 21 giu 2019 alle ore 12:50 Jason Matusiak <
jason@gardettoengineering.com> ha scritto:
Simona,
I suggest sending just the one email and then waiting on a response. It
could take hours or a few days, but people on here generally are super
helpful where they can.
Do you have a Vivado license? You are definitely going to need one for
the X310 build (the webpack won't work).
Have you read through this link, it is very helpful:
https://kb.ettus.com/Getting_Started_with_RFNoC_Development
From: USRP-users usrp-users-bounces@lists.ettus.com on behalf of
Simona Sibio via USRP-users usrp-users@lists.ettus.com
Sent: Friday, June 21, 2019 7:43 AM
To: USRP Users
Subject: Re: [USRP-users] USRP-users Digest, Vol 106, Issue 21
Dear all,
I would work on the X310 with Vivado Xilinx.
I have dowloaded all requirements but when I tried with make
X310_RFNOC_HG, I have the following error message:
make X310_RFNOC_HG
make -f Makefile.x300.inc bin NAME=X310_RFNOC_HG ARCH=kintex7
PART_ID=xc7k410t/ffg900/-2 BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1
RFNOC=1 X310=1 TOP_MODULE=x300 EXTRA_DEFS="BUILD_1G=1 BUILD_10G=1
SFP0_1GBE=1 SFP1_10GBE=1 RFNOC=1 X310=1"
make[1]: Entering directory
'/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300'
BUILDER: Checking tools...
- GNU bash, version 4.4.19(1)-release (x86_64-pc-linux-gnu)
- Python 2.7.15rc1
- Vivado v2018.3 (64-bit)
---=======================
BUILDER: Building IP ten_gig_eth_pcs_pma
---=======================
BUILDER: Staging IP in build directory...
BUILDER: Reserving IP location:
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
BUILDER: Retargeting IP to part kintex7/xc7k410t/ffg900/-2...
BUILDER: Building IP...
[00:00:00] Executing command: vivado -mode batch -source
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/tools/scripts/viv_generate_ip.tcl
-log ten_gig_eth_pcs_pma.log -nojournal
WARNING: [Device 21-436] No parts matched 'xc7k410tffg900-2'
ERROR: [Coretcl 2-106] Specified part could not be found.
[00:00:06] Current task: Initialization +++ Current Phase: Starting
[00:00:06] Current task: Initialization +++ Current Phase: Finished
[00:00:06] Process terminated. Status: Failure
---=======================
Warnings: 1
Critical Warnings: 0
Errors: 1
BUILDER: Releasing IP location:
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma
/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/ip/ten_gig_eth_pcs_pma/Makefile.inc:41:
recipe for target
'/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out'
failed
make[1]: ***
[/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300/build-ip/xc7k410tffg900-2/ten_gig_eth_pcs_pma/ten_gig_eth_pcs_pma.xci.out]
Error 1
make[1]: Leaving directory
'/home/uwave-lab/Documents/Vivado/fpga-master/usrp3/top/x300'
Makefile:112: recipe for target 'X310_RFNOC_HG' failed
make: *** [X310_RFNOC_HG] Error 2
Could you help me?
Is it a licence problem?
I have installed the WebPACK 2018.3.
Thank you in advance.
Best Regards,
Simona
Il giorno gio 20 giu 2019 alle ore 17:00 <
usrp-users-request@lists.ettus.com> ha scritto:
Send USRP-users mailing list submissions to
usrp-users@lists.ettus.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
or, via email, send a message with subject or body 'help' to
usrp-users-request@lists.ettus.com
You can reach the person managing the list at
usrp-users-owner@lists.ettus.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of USRP-users digest..."
Today's Topics:
1. E320 with larger SD card (Jason Matusiak)
2. Re: E320 with larger SD card (Marcus D. Leech)
3. Re: E320 with larger SD card (Jason Matusiak)
4. Re: E320 with larger SD card (Nate Temple)
5. Re: RFNoC multi-driven nets (Mitch Davis)
6. Re: Registering Block Controllers to UHD (Christian Valledor)
7. Re: RFNoC multi-driven nets (Roberto Michio Marques Kagami)
8. Re: Waveform Shape Not Accurate (Marcus D. Leech)
9. RX/TX on 4 channels on N310 (Jessica Iwamoto)
- Re: RX/TX on 4 channels on N310 (Nate Temple)
- Re: RX/TX on 4 channels on N310 (Ali Dormiani)
- Receiving response packets via UHD (Nick Foster)
- Re: E320 with larger SD card (Chris Gobbett)
- Re: E320 with larger SD card (Jason Matusiak)
- Re: E320 with larger SD card (Chris Gobbett)
- Re: E320 with larger SD card (Jason Matusiak)
- USRP gain refers to which amplifier (Koyel Das (Vehere))
- unsubscribe (Fabian Schwartau)
- Re: USRP gain refers to which amplifier (Marcus D. Leech)
- Re: E320 with larger SD card (Jason Matusiak)
- unsubscribe (Zhihong Luo)
Message: 1
Date: Wed, 19 Jun 2019 16:29:38 +0000
From: Jason Matusiak jason@gardettoengineering.com
To: Ettus Mail List usrp-users@lists.ettus.com
Subject: [USRP-users] E320 with larger SD card
Message-ID:
<
BL0PR12MB23409479CB3FBD5B7DCAAC19AFE50@BL0PR12MB2340.namprd12.prod.outlook.com
Content-Type: text/plain; charset="iso-8859-1"
I wanted to use a larger SD card than the one that as supplied, but I am
having issues. I loaded up the card, and then extended the data partition
to use up the rest of the free space (about 100GB). But then it doesn't
boot.
I am wondering if the change to a partition size screwed up something in a
config file somewhere. Is there a way to fix this without rebuilding a
docker image? I am using the UHD 3.14.0.0. that has the smaller data
partition (UHD 3.14.1.0 has a larger data partition, but doesn't include
any GR/python packages, so I need to use the older image).
Thanks.