Hello, I ma wokring through "Build custom image with pre-built RFNoC blocks" I am running the following script: hassna@hassna-desktop:~/rfnoc/src/uhd-fpga/usrp3/tools/scripts$ ./uhd_image_builder_gui.py --Using the following blocks to generate image: * window * fft Adding CE instantiation file for 'X310_RFNOC_XG' changing temporarily working directory to /home/hassna/rfnoc/src/uhd-fpga/usrp3/tools/scripts/../../top/x300 Setting up a 64-bit FPGA build environment for the USRP-X3x0... - Vivado: Found (/opt/Xilinx/Vivado_Lab/2017.4/bin) Environment successfully initialized. make -f Makefile.x300.inc bin NAME=X310_RFNOC_XG ARCH=kintex7 PART_ID=xc7k410t/ffg900/-2 BUILD_10G=1 SFP0_10GBE=1 SFP1_10GBE=1 RFNOC=1 X310=1 TOP_MODULE=x300 EXTRA_DEFS="BUILD_10G=1 SFP0_10GBE=1 SFP1_10GBE=1 RFNOC=1 X310=1 " make[1]: Entering directory '/home/hassna/rfnoc/src/uhd-fpga/usrp3/top/x300' BUILDER: Checking tools... * GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu) * Python 2.7.12 * ERROR: Vivado not found in environment. Please run setupenv.sh /home/hassna/rfnoc/src/uhd-fpga/usrp3/top/../tools/make/viv_preamble.mak:56: recipe for target '.check_tool' failed make[1]: *** [.check_tool] Error 1 make[1]: Leaving directory '/home/hassna/rfnoc/src/uhd-fpga/usrp3/top/x300' Makefile:129: recipe for target 'X310_RFNOC_XG' failed make: *** [X310_RFNOC_XG] Error 2 Then I run : hassna@hassna-desktop:~$ source ~/rfnoc/src/uhd-fpga/usrp3/top/x300/setupenv.sh Setting up a 64-bit FPGA build environment for the USRP-X3x0... - Vivado: Found (/opt/Xilinx/Vivado_Lab/2017.4/bin) Environment successfully initialized. hassna@hassna-desktop:~$ vivado -version vivado: command not found Why vivado: command not found? I appreciate your help with this matter. Thanks, Hassna

Hassna, you can't build RFNoC images with Vivado_Lab. You need the full Vivado. -- M On 07/31/2018 12:14 PM, Ouassal, Hassna via USRP-users wrote: > Hello, > > > > I ma wokring through "Build custom image with pre-built RFNoC blocks" > > > I am running the following script: > > hassna@hassna-desktop:~/rfnoc/src/uhd-fpga/usrp3/tools/scripts$ > ./uhd_image_builder_gui.py > --Using the following blocks to generate image: >     * window >     * fft > Adding CE instantiation file for 'X310_RFNOC_XG' > changing temporarily working directory to > /home/hassna/rfnoc/src/uhd-fpga/usrp3/tools/scripts/../../top/x300 > Setting up a 64-bit FPGA build environment for the USRP-X3x0... > - Vivado: Found (/opt/Xilinx/Vivado_Lab/2017.4/bin) > > Environment successfully initialized. > make -f Makefile.x300.inc bin NAME=X310_RFNOC_XG ARCH=kintex7 > PART_ID=xc7k410t/ffg900/-2 BUILD_10G=1 SFP0_10GBE=1 SFP1_10GBE=1  > RFNOC=1 X310=1  TOP_MODULE=x300 EXTRA_DEFS="BUILD_10G=1 SFP0_10GBE=1 > SFP1_10GBE=1  RFNOC=1 X310=1 " > make[1]: Entering directory '/home/hassna/rfnoc/src/uhd-fpga/usrp3/top/x300' > BUILDER: Checking tools... > * GNU bash, version 4.3.48(1)-release (x86_64-pc-linux-gnu) > * Python 2.7.12 > * ERROR: Vivado not found in environment. Please run setupenv.sh > /home/hassna/rfnoc/src/uhd-fpga/usrp3/top/../tools/make/viv_preamble.mak:56: > recipe for target '.check_tool' failed > make[1]: *** [.check_tool] Error 1 > make[1]: Leaving directory '/home/hassna/rfnoc/src/uhd-fpga/usrp3/top/x300' > Makefile:129: recipe for target 'X310_RFNOC_XG' failed > make: *** [X310_RFNOC_XG] Error 2 > > Then I run : > > hassna@hassna-desktop:~$ source > ~/rfnoc/src/uhd-fpga/usrp3/top/x300/setupenv.sh > Setting up a 64-bit FPGA build environment for the USRP-X3x0... > - Vivado: Found (/opt/Xilinx/Vivado_Lab/2017.4/bin) > > Environment successfully initialized. > hassna@hassna-desktop:~$ vivado -version > vivado: command not found > > > Why vivado: command not found? > > I appreciate your help with this matter. > > Thanks, > > Hassna > > > > > > > > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >