Hello All. I' having problems with one usrp, this work before, and i'm looking for ssh / teamviewer, skype or another support to leave this running. This is the configuration: 1 x USRP 1 (modified for clocktamer) 2 x RFX1800 1 x fairwaves Clocktamer When i run kal, i only see # kal -s PCS kal: Scanning for PCS-1900 base stations. i see no errors, but nothing happen. I recheck the tamer config, i need if some expert can connect to ssh and check if something is wrong and tell me how to correct or if i need to change some component. I repeat, this is working some days ago... I can pay support in paypal without problems. If anybody can help me please write to my email, and i will send connection info and some pictures about config. Thank you , regards Cristian

Hello Cristian: It's odd that your system just stopped working suddenly. Did you change any of the software, or run updates, or apply any patches, etc.? If you're sure that you did not change any of the software, then it sounds like there is some kind of hardware failure. Are you sure that nothing is broken? Are you sure that a too-strong signal was accidentally injected into the RFX1800 daughterboard? How recently was the whole system working? --Neel On 3 February 2015 at 15:37, Cristian Rougier via USRP-users < usrp-users@lists.ettus.com> wrote: > Hello All. > > I' having problems with one usrp, this work before, and i'm looking for > ssh / teamviewer, skype or another support to leave this running. > > This is the configuration: > > 1 x USRP 1 (modified for clocktamer) > 2 x RFX1800 > 1 x fairwaves Clocktamer > > When i run kal, i only see > # kal -s PCS > kal: Scanning for PCS-1900 base stations. > > i see no errors, but nothing happen. > > I recheck the tamer config, i need if some expert can connect to ssh and > check if something is wrong > and tell me how to correct or if i need to change some component. > > I repeat, this is working some days ago... > > I can pay support in paypal without problems. > > If anybody can help me please write to my email, and i will send > connection info and some pictures about config. > > Thank you , regards > Cristian > > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >

 Hello All.

 I' having problems with one usrp, this work before, and i'm
 looking for ssh / teamviewer, skype or another support to leave
 this running.

 This is the configuration:

 1 x USRP 1 (modified for clocktamer)
 2 x RFX1800
 1 x fairwaves Clocktamer

 When i run kal, i only see
 # kal -s PCS
 kal: Scanning for PCS-1900 base stations.

 i see no errors, but nothing happen.

 I recheck the tamer config, i need if some expert can connect to
 ssh and check if something is wrong
  and tell me how to correct or if i need to change some component.

 I repeat, this is working some days ago...

 I can pay support in paypal without problems.

 If anybody can help me please write to my email, and i will send
 connection info and some pictures about config.

 Thank you , regards
 Cristian




 _______________________________________________
 USRP-users mailing list
 USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
 http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Hello, and thank you for your answer. Chronology was: - System stopped - After checking, i saw that device start work, with external tamer usb (power) cable. - Now system stopped with this cable too. Regards Cristian *La Info* Tecnología y Programación http://www.lainfo.com.mx cristian@lainfo.com.mx *Agréganos en Facebook <http://www.facebook.com/pages/La-Info-Publicidad-Bluetooth-Marketing-Bluetooth-Marketing-Sms/125635017500475>* Tel:(++5255) 8589-1554 / 2452-1030 Celular, WhatsApp y Viber: 55-1770-9888 No imprimir si no es necesario. Protejamos el Medio Ambiente On 03/02/15 18:23, Neel Pandeya wrote: > Hello Cristian: > > It's odd that your system just stopped working suddenly. Did you > change any of the software, or run updates, or apply any patches, > etc.? If you're sure that you did not change any of the software, then > it sounds like there is some kind of hardware failure. Are you sure > that nothing is broken? Are you sure that a too-strong signal was > accidentally injected into the RFX1800 daughterboard? How recently was > the whole system working? > > --Neel > > > > On 3 February 2015 at 15:37, Cristian Rougier via USRP-users > <usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote: > > Hello All. > > I' having problems with one usrp, this work before, and i'm > looking for ssh / teamviewer, skype or another support to leave > this running. > > This is the configuration: > > 1 x USRP 1 (modified for clocktamer) > 2 x RFX1800 > 1 x fairwaves Clocktamer > > When i run kal, i only see > # kal -s PCS > kal: Scanning for PCS-1900 base stations. > > i see no errors, but nothing happen. > > I recheck the tamer config, i need if some expert can connect to > ssh and check if something is wrong > and tell me how to correct or if i need to change some component. > > I repeat, this is working some days ago... > > I can pay support in paypal without problems. > > If anybody can help me please write to my email, and i will send > connection info and some pictures about config. > > Thank you , regards > Cristian > > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >