Empathy List Archives

N

NE8S

Mon, Aug 29, 2005 7:50 PM

Greetings, T & F domainers,

I seek an HP 10638A Degausser plus interconnecting cable. Does anyone have one to sell?

Also, looking for HP 5061A Power Connector and/or complete assembly.

Are there any HP 5089A's out there for sale?????

Contact: Gar

ne8s@earthlink.net

Greetings, T & F domainers, I seek an HP 10638A Degausser plus interconnecting cable. Does anyone have one to sell? Also, looking for HP 5061A Power Connector and/or complete assembly. Are there any HP 5089A's out there for sale????? Contact: Gar ne8s@earthlink.net

CN

Chuck Norton

Mon, Aug 29, 2005 8:59 PM

I do not have an extra cable for the 10638A but I do have the pin out if you
end up having to make one. I have several of the connectors for the HP 5061s
in stock and also have sever4al of the power cables already made up. Contact
me off the mail list at the email below and we can set something up.
Chuck Norton
Frequency Standards & Services
2727 E. Palmer Park Blvd. Ste 100
Colorado Springs, CO. 80909-5068
V- 719-228-0540
F- 719-228-9009

cen@frequencystandards.com

I do not have an extra cable for the 10638A but I do have the pin out if you end up having to make one. I have several of the connectors for the HP 5061s in stock and also have sever4al of the power cables already made up. Contact me off the mail list at the email below and we can set something up. Chuck Norton Frequency Standards & Services 2727 E. Palmer Park Blvd. Ste 100 Colorado Springs, CO. 80909-5068 V- 719-228-0540 F- 719-228-9009 cen@frequencystandards.com

MT

Masamichi Tsuchiya

Tue, Aug 30, 2005 2:47 PM

Dear NE8S,

I don't have HP10638A, I would like to send you this pin assignment
information from HP5061A manual by off line.
If you make this, please use connector as follows:
Bendix PT06A-14-18P1005

Power Connector for the HP5061A, I have some complete it but I think
please order this MIL spec. connector from some parts dealer in USA
that parts number as following:
Cannon MS3106A-18-22SW and accessories

Standby power supply HP5089A that very hard to find depend on
discontinued products and active use still now, I bought from Agilent in
2002 with 5071A/001 that probably last new one.
Last month, I bought unused Austron 1290A but unfortunately this one
don't have Low Voltage Drop Out Circuits and looks like HP5085A that
have full set of connectors and please purchase EXT DC input connectors
as following parts number for the HP5061A:
Cannon MS3106E-14S-5S and accessories

If you requires standby power supply that please purchase unused
Austron 1290A or modified HP5085A for the sealed lead-acid batteries that
please pay attention those don't have low voltage drop out circuits.
If you requires modified procedure for the HP5085A, I would like to contact
off-line

Best regards,

               Tsuchiya  JA2GXU

----- Original Message -----
From: "NE8S" ne8s@earthlink.net
To: time-nuts@febo.com
Sent: Tuesday, August 30, 2005 4:50 AM
Subject: [time-nuts] Looking for HP 10638A Degausser with cable

Greetings, T & F domainers,

I seek an HP 10638A Degausser plus interconnecting cable. Does anyone have
one to sell?

Also, looking for HP 5061A Power Connector and/or complete assembly.

Are there any HP 5089A's out there for sale?????

Contact: Gar

ne8s@earthlink.net

time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts

Dear NE8S, I don't have HP10638A, I would like to send you this pin assignment information from HP5061A manual by off line. If you make this, please use connector as follows: Bendix PT06A-14-18P1005 Power Connector for the HP5061A, I have some complete it but I think please order this MIL spec. connector from some parts dealer in USA that parts number as following: Cannon MS3106A-18-22SW and accessories Standby power supply HP5089A that very hard to find depend on discontinued products and active use still now, I bought from Agilent in 2002 with 5071A/001 that probably last new one. Last month, I bought unused Austron 1290A but unfortunately this one don't have Low Voltage Drop Out Circuits and looks like HP5085A that have full set of connectors and please purchase EXT DC input connectors as following parts number for the HP5061A: Cannon MS3106E-14S-5S and accessories If you requires standby power supply that please purchase unused Austron 1290A or modified HP5085A for the sealed lead-acid batteries that please pay attention those don't have low voltage drop out circuits. If you requires modified procedure for the HP5085A, I would like to contact off-line Best regards, Tsuchiya JA2GXU ----- Original Message ----- From: "NE8S" <ne8s@earthlink.net> To: <time-nuts@febo.com> Sent: Tuesday, August 30, 2005 4:50 AM Subject: [time-nuts] Looking for HP 10638A Degausser with cable Greetings, T & F domainers, I seek an HP 10638A Degausser plus interconnecting cable. Does anyone have one to sell? Also, looking for HP 5061A Power Connector and/or complete assembly. Are there any HP 5089A's out there for sale????? Contact: Gar ne8s@earthlink.net _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts

PK

Poul-Henning Kamp

Tue, Aug 30, 2005 2:51 PM

In message 003301c5ad71$cd426f40$af9528da@TWMT, "Masamichi Tsuchiya" writes:

If you requires standby power supply that please purchase unused
Austron 1290A or modified HP5085A for the sealed lead-acid batteries that
please pay attention those don't have low voltage drop out circuits.

There are many products on the market which can be used, look for
"battery backed power supply" for fire alarms and similar uses.

--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
phk@FreeBSD.ORG | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.

In message <003301c5ad71$cd426f40$af9528da@TWMT>, "Masamichi Tsuchiya" writes: >If you requires standby power supply that please purchase unused >Austron 1290A or modified HP5085A for the sealed lead-acid batteries that >please pay attention those don't have low voltage drop out circuits. There are many products on the market which can be used, look for "battery backed power supply" for fire alarms and similar uses. -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 phk@FreeBSD.ORG | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence.

MF

Mike Feher

Wed, Aug 31, 2005 12:34 PM

Well, since I can no longer easily use my True Time 468, I bought the
subject receiver on ebay. I admit to being only an engineer but the menu
set-up for initial conditions baffles me. Can anyone on here help. It seems
there are bound to be a lot of them out there. Google did not turn up
anything of use. While the large display of the 468 was nice, I would be
content with the display on the 9390. The 1 PPS output is a plus. Any help
would be appreciated and of course returned in kind if needed. Thanks - Mike

Mike B. Feher, N4FS
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960

Well, since I can no longer easily use my True Time 468, I bought the subject receiver on ebay. I admit to being only an engineer but the menu set-up for initial conditions baffles me. Can anyone on here help. It seems there are bound to be a lot of them out there. Google did not turn up anything of use. While the large display of the 468 was nice, I would be content with the display on the 9390. The 1 PPS output is a plus. Any help would be appreciated and of course returned in kind if needed. Thanks - Mike Mike B. Feher, N4FS 89 Arnold Blvd. Howell, NJ, 07731 732-886-5960

time-nuts@lists.febo.com

Looking for HP 10638A Degausser with cable