Empathy List Archives

SC

Swanson, Craig

Mon, Mar 21, 2016 11:57 PM

Martin,
Where can I get your latest gnuradio code for the transmitter and receiver for OFDM? I am aware of the rfnoc-ofdm git in fpga, but I wanted to start out with the flowgraph UHD code that doesn't use RFNoC.
Is there a repository for presentations, tutorials, and flowgraphs?

Thanks,
Craig

Craig F. Swanson
Research Engineer II
Information and Communications Laboratory
Communications, Systems, and Spectrum Division
Georgia Tech Research Institute
Room 560
250 14th Street NW
Atlanta, GA 30318
Cell: 770-298-9156
http://www.gtri.gatech.edu

Martin, Where can I get your latest gnuradio code for the transmitter and receiver for OFDM? I am aware of the rfnoc-ofdm git in fpga, but I wanted to start out with the flowgraph UHD code that doesn't use RFNoC. Is there a repository for presentations, tutorials, and flowgraphs? Thanks, Craig Craig F. Swanson Research Engineer II Information and Communications Laboratory Communications, Systems, and Spectrum Division Georgia Tech Research Institute Room 560 250 14th Street NW Atlanta, GA 30318 Cell: 770-298-9156 http://www.gtri.gatech.edu

DN

Dave NotTelling

Tue, Mar 22, 2016 12:44 PM

Craig,

 Check out https://github.com/bastibl/gr-ieee802-11.

-Dave

On Mon, Mar 21, 2016 at 7:57 PM, Swanson, Craig via USRP-users <
usrp-users@lists.ettus.com> wrote:

Martin,

Where can I get your latest gnuradio code for the transmitter and receiver
for OFDM? I am aware of the rfnoc-ofdm git in fpga, but I wanted to start
out with the flowgraph UHD code that doesn’t use RFNoC.

Is there a repository for presentations, tutorials, and flowgraphs?

Thanks,

Craig

Craig F. Swanson

Research Engineer II

Information and Communications Laboratory

Communications, Systems, and Spectrum Division

Georgia Tech Research Institute

Room 560

250 14th Street NW

Atlanta, GA 30318

Cell: 770-298-9156

http://www.gtri.gatech.edu

USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Craig, Check out https://github.com/bastibl/gr-ieee802-11. -Dave On Mon, Mar 21, 2016 at 7:57 PM, Swanson, Craig via USRP-users < usrp-users@lists.ettus.com> wrote: > Martin, > > Where can I get your latest gnuradio code for the transmitter and receiver > for OFDM? I am aware of the rfnoc-ofdm git in fpga, but I wanted to start > out with the flowgraph UHD code that doesn’t use RFNoC. > > Is there a repository for presentations, tutorials, and flowgraphs? > > > > Thanks, > > Craig > > > > *Craig F. Swanson* > > *Research Engineer II* > > *Information and Communications Laboratory* > > *Communications, Systems, and Spectrum Division* > > Georgia Tech Research Institute > > Room 560 > > 250 14th Street NW > > Atlanta, GA 30318 > > Cell: 770-298-9156 > > http://www.gtri.gatech.edu > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >

MB

Martin Braun

Tue, Mar 22, 2016 10:56 PM

The core GNU Radio stuff provides some examples in
gr-digital/examples/ofdm, I suggest starting there.

Cheers,
Martin

On 03/21/2016 04:57 PM, Swanson, Craig wrote:

Martin,

Where can I get your latest gnuradio code for the transmitter and
receiver for OFDM? I am aware of the rfnoc-ofdm git in fpga, but I
wanted to start out with the flowgraph UHD code that doesn’t use RFNoC.

Is there a repository for presentations, tutorials, and flowgraphs?

Thanks,

Craig

Craig F. Swanson

Research Engineer II

Information and Communications Laboratory

Communications, Systems, and Spectrum Division

Georgia Tech Research Institute

Room 560

250 14^th Street NW

Atlanta, GA 30318

Cell: 770-298-9156

http://www.gtri.gatech.edu

The core GNU Radio stuff provides some examples in gr-digital/examples/ofdm, I suggest starting there. Cheers, Martin On 03/21/2016 04:57 PM, Swanson, Craig wrote: > Martin, > > Where can I get your latest gnuradio code for the transmitter and > receiver for OFDM? I am aware of the rfnoc-ofdm git in fpga, but I > wanted to start out with the flowgraph UHD code that doesn’t use RFNoC. > > Is there a repository for presentations, tutorials, and flowgraphs? > > > > Thanks, > > Craig > > > > *Craig F. Swanson* > > *Research Engineer II* > > *Information and Communications Laboratory* > > *Communications, Systems, and Spectrum Division* > > Georgia Tech Research Institute > > Room 560 > > 250 14^th Street NW > > Atlanta, GA 30318 > > Cell: 770-298-9156 > > http://www.gtri.gatech.edu > > >

SC

Swanson, Craig

Sun, Apr 10, 2016 4:02 PM

Dave,

Thanks for the heads up. This led me to reading about Bastian'?s AGC paper and running it on an FPGA which I am assuming is RFNoC. Do you know how we can get the FPGA code?

Thanks,

Craig

Craig F. Swanson
Research Engineer II
Information and Communications Laboratory
Communications, Systems, and Spectrum Division
Georgia Tech Research Institute
Room 560
250 14th St NW
Atlanta, GA 30318
Cell: 770.298.9156
http://www.gtri.gatech.edu https://mail.gtri.gatech.edu/owa/redir.aspx?C=c20925f2f0af4dd29329ddf0701ecfff&URL=http%3a%2f%2fwww.gtri.gatech.edu%2f

From: Dave NotTelling dmp250net@gmail.com
Sent: Tuesday, March 22, 2016 8:44 AM
To: Swanson, Craig
Cc: Martin Braun; usrp-users@lists.ettus.com
Subject: Re: [USRP-users] Where can I find the latest OFDM support materials

Craig,

 Check out https://github.com/bastibl/gr-ieee802-11.

-Dave

On Mon, Mar 21, 2016 at 7:57 PM, Swanson, Craig via USRP-users <usrp-users@lists.ettus.com mailto:usrp-users@lists.ettus.com> wrote:
Martin,
Where can I get your latest gnuradio code for the transmitter and receiver for OFDM? I am aware of the rfnoc-ofdm git in fpga, but I wanted to start out with the flowgraph UHD code that doesn't use RFNoC.
Is there a repository for presentations, tutorials, and flowgraphs?

Thanks,
Craig

Craig F. Swanson
Research Engineer II
Information and Communications Laboratory
Communications, Systems, and Spectrum Division
Georgia Tech Research Institute
Room 560
250 14th Street NW
Atlanta, GA 30318
Cell: 770-298-9156tel:770-298-9156
http://www.gtri.gatech.edu

USRP-users mailing list
USRP-users@lists.ettus.com mailto:USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Dave, Thanks for the heads up. This led me to reading about Bastian'?s AGC paper and running it on an FPGA which I am assuming is RFNoC. Do you know how we can get the FPGA code? Thanks, Craig Craig F. Swanson Research Engineer II Information and Communications Laboratory Communications, Systems, and Spectrum Division Georgia Tech Research Institute Room 560 250 14th St NW Atlanta, GA 30318 Cell: 770.298.9156 http://www.gtri.gatech.edu<https://mail.gtri.gatech.edu/owa/redir.aspx?C=c20925f2f0af4dd29329ddf0701ecfff&URL=http%3a%2f%2fwww.gtri.gatech.edu%2f> ________________________________ From: Dave NotTelling <dmp250net@gmail.com> Sent: Tuesday, March 22, 2016 8:44 AM To: Swanson, Craig Cc: Martin Braun; usrp-users@lists.ettus.com Subject: Re: [USRP-users] Where can I find the latest OFDM support materials Craig, Check out https://github.com/bastibl/gr-ieee802-11. -Dave On Mon, Mar 21, 2016 at 7:57 PM, Swanson, Craig via USRP-users <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote: Martin, Where can I get your latest gnuradio code for the transmitter and receiver for OFDM? I am aware of the rfnoc-ofdm git in fpga, but I wanted to start out with the flowgraph UHD code that doesn't use RFNoC. Is there a repository for presentations, tutorials, and flowgraphs? Thanks, Craig Craig F. Swanson Research Engineer II Information and Communications Laboratory Communications, Systems, and Spectrum Division Georgia Tech Research Institute Room 560 250 14th Street NW Atlanta, GA 30318 Cell: 770-298-9156<tel:770-298-9156> http://www.gtri.gatech.edu _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com<mailto:USRP-users@lists.ettus.com> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

MM

Marcus Müller

Sun, Apr 10, 2016 6:53 PM

No, that was done on a N210, which is a second generation device and
predates RFNoC (and can't be supported by RFNoC).

Best regards,
Marcus

On 10.04.2016 18:02, Swanson, Craig via USRP-users wrote:

Dave,

Thanks for the heads up. This led me to reading about Bastian's AGC
paper and running it on an FPGA which I am assuming is RFNoC. Do you
know how we can get the FPGA code?

Thanks,

Craig

Craig F. Swanson
/Research Engineer II
/
/Information and Communications Laboratory/
/Communications, Systems, and Spectrum Division/
/Georgia Tech Research Institute/
/Room 560
250 14th St NW
/
/Atlanta, GA 30318/
/Cell: 770.298.9156/
http://www.gtri.gatech.edu
https://mail.gtri.gatech.edu/owa/redir.aspx?C=c20925f2f0af4dd29329ddf0701ecfff&URL=http%3a%2f%2fwww.gtri.gatech.edu%2f

From: Dave NotTelling dmp250net@gmail.com
Sent: Tuesday, March 22, 2016 8:44 AM
To: Swanson, Craig
Cc: Martin Braun; usrp-users@lists.ettus.com
Subject: Re: [USRP-users] Where can I find the latest OFDM support
materials

Craig,

  Check out https://github.com/bastibl/gr-ieee802-11.

-Dave

On Mon, Mar 21, 2016 at 7:57 PM, Swanson, Craig via USRP-users
<usrp-users@lists.ettus.com mailto:usrp-users@lists.ettus.com> wrote:

 Martin,

 Where can I get your latest gnuradio code for the transmitter and
 receiver for OFDM?  I am aware of the rfnoc-ofdm git in fpga, but
 I wanted to start out with the flowgraph UHD code that doesn’t use
 RFNoC.

 Is there a repository for presentations, tutorials, and flowgraphs?

  

 Thanks,

 Craig

  

 *Craig F. Swanson*

 *Research Engineer II*

 *Information and Communications Laboratory*

 *Communications, Systems, and Spectrum Division*

 Georgia Tech Research Institute

 Room 560

 250 14^th Street NW

 Atlanta, GA 30318

 Cell: 770-298-9156 <tel:770-298-9156>

 http://www.gtri.gatech.edu

  


 _______________________________________________
 USRP-users mailing list
 USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com>
 http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

No, that was done on a N210, which is a second generation device and predates RFNoC (and can't be supported by RFNoC). Best regards, Marcus On 10.04.2016 18:02, Swanson, Craig via USRP-users wrote: > > Dave, > > Thanks for the heads up. This led me to reading about Bastian's AGC > paper and running it on an FPGA which I am assuming is RFNoC. Do you > know how we can get the FPGA code? > > > Thanks, > > Craig > > > *Craig F. Swanson* > */Research Engineer II > /* > */Information and Communications Laboratory/* > */Communications, Systems, and Spectrum Division/* > /Georgia Tech Research Institute/ > /Room 560 > 250 14th St NW > / > /Atlanta, GA 30318/ > /Cell: 770.298.9156/ > http://www.gtri.gatech.edu > <https://mail.gtri.gatech.edu/owa/redir.aspx?C=c20925f2f0af4dd29329ddf0701ecfff&URL=http%3a%2f%2fwww.gtri.gatech.edu%2f> > > ------------------------------------------------------------------------ > *From:* Dave NotTelling <dmp250net@gmail.com> > *Sent:* Tuesday, March 22, 2016 8:44 AM > *To:* Swanson, Craig > *Cc:* Martin Braun; usrp-users@lists.ettus.com > *Subject:* Re: [USRP-users] Where can I find the latest OFDM support > materials > > Craig, > > Check out https://github.com/bastibl/gr-ieee802-11. > > -Dave > > On Mon, Mar 21, 2016 at 7:57 PM, Swanson, Craig via USRP-users > <usrp-users@lists.ettus.com <mailto:usrp-users@lists.ettus.com>> wrote: > > Martin, > > Where can I get your latest gnuradio code for the transmitter and > receiver for OFDM? I am aware of the rfnoc-ofdm git in fpga, but > I wanted to start out with the flowgraph UHD code that doesn’t use > RFNoC. > > Is there a repository for presentations, tutorials, and flowgraphs? > > > > Thanks, > > Craig > > > > *Craig F. Swanson* > > *Research Engineer II* > > *Information and Communications Laboratory* > > *Communications, Systems, and Spectrum Division* > > Georgia Tech Research Institute > > Room 560 > > 250 14^th Street NW > > Atlanta, GA 30318 > > Cell: 770-298-9156 <tel:770-298-9156> > > http://www.gtri.gatech.edu > > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com <mailto:USRP-users@lists.ettus.com> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > > > > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com