Pic programing for the PICTIC II
I already volunteered to program the PICs for Europe. I'll elaborate
more as things progress.
Regards,
Ignacio, EB4APL
Arnold Tibus wrote:
Hello Stanley,
I wrote already twice offline, but it looks like
it doesn't arrive.
So I ask this way, if it is not too late,
can I order as well 2 ea.? Who can provide the
programmed pics (best in Europe for Germany)?
Many thanks,
Arnold
Am 03.07.2010 18:27, schrieb Stanley Reynolds:
No problem, I expect to have the boards 7/21, I will have plenty.
Stanley
----- Original Message ----
From: Robert Berg bob.b@pobox.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sat, July 3, 2010 9:26:49 AM
Subject: Re: [time-nuts] PICTIC II PCB order placed
Stanley,
If it's not too late, could I order 2 boards, please?
Thanks!
Robert Berg
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Many thanks,
gracias Ignacio,
Arnold
Am 03.07.2010 20:35, schrieb EB4APL:
I already volunteered to program the PICs for Europe. I'll elaborate
more as things progress.
Regards,
Ignacio, EB4APL
Arnold Tibus wrote:
Hello Stanley,
I wrote already twice offline, but it looks like
it doesn't arrive.
So I ask this way, if it is not too late,
can I order as well 2 ea.? Who can provide the
programmed pics (best in Europe for Germany)?
Many thanks,
Arnold
Am 03.07.2010 18:27, schrieb Stanley Reynolds:
No problem, I expect to have the boards 7/21, I will have plenty.
Stanley
----- Original Message ----
From: Robert Berg bob.b@pobox.com
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Sat, July 3, 2010 9:26:49 AM
Subject: Re: [time-nuts] PICTIC II PCB order placed
Stanley,
If it's not too late, could I order 2 boards, please?
Thanks!
Robert Berg
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Hello,
Can You add me to Your order list ?
I would like to buy 2 pcb
Best regards,
Artur Dworak sp5qa
Stanley Reynolds pisze:
No problem, I expect to have the boards 7/21, I will have plenty.
Stanley
----- Original Message ----
From: Robert Berg bob.b@pobox.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sat, July 3, 2010 9:26:49 AM
Subject: Re: [time-nuts] PICTIC II PCB order placed
Stanley,
If it's not too late, could I order 2 boards, please?
Thanks!
Robert Berg
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Ill take two boards by the way.
Thanks!
On 7/3/10, Stanley Reynolds stanley_reynolds@yahoo.com wrote:
No problem, I expect to have the boards 7/21, I will have plenty.
Stanley
----- Original Message ----
From: Robert Berg bob.b@pobox.com
To: Discussion of precise time and frequency measurement
time-nuts@febo.com
Sent: Sat, July 3, 2010 9:26:49 AM
Subject: Re: [time-nuts] PICTIC II PCB order placed
Stanley,
If it's not too late, could I order 2 boards, please?
Thanks!
Robert Berg
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Please,
Add me for 2 pieces,
Thank-you,
Bernard, F1EHX.
----- Original Message -----
From: "Stanley Reynolds" stanley_reynolds@yahoo.com
To: "Discussion of precise time and frequency measurement" time-nuts@febo.com
Sent: Friday, July 02, 2010 6:46 PM
Subject: [time-nuts] PICTIC II PCB order placed
Oops, I didn't know this was on the list been getting a lot of off list stuff.
Some of my own emails to the list get lost before they get to me, others are
delayed this is a on going problem probably a yahoo spam filter overload.
UPDATE on order:
I have placed the order for more boards than needed and hope to receive them in
less than 2 weeks.
As far as shipping think it will be easy for me if we call it 1 USD per board. I
will let everyone gage when they need to mail their US funds check/money order.
If you are paying by paypal add 50 cents per board for a total of 9.50. No need
for payment till I receive the boards unless you are unsure how long it will
take for me to receive it.
Stanley Reynolds
225 Alpine Street
Birmingham, AL 35210
USA
If your software will only work with Irondale and not Birmingham this is OK
Stanley Reynolds
225 Alpine Street
Irondale, AL 35210
USA
paypal stanley_reynolds@yahoo.com
----- Original Message ----
From: Bob Bownes bownes@gmail.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Fri, July 2, 2010 10:45:36 AM
Subject: Re: [time-nuts] Pic programing for the PICTIC II
Ok. I think there are a few of us who can/would program these up for
folks who need one.
On Fri, Jul 2, 2010 at 11:43 AM, Stanley Reynolds
stanley_reynolds@yahoo.com wrote:
Thank you but I have all I want to do with the boards later I may change my
mind.
Stanley
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Orange vous informe que cet e-mail a ete controle par l'anti-virus mail.
Aucun virus connu a ce jour par nos services n'a ete detecte.
You are on the list.
Stanley
----- Original Message ----
From: f1ehx f1ehx@wanadoo.fr
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Sun, July 4, 2010 3:50:16 AM
Subject: Re: [time-nuts] PICTIC II PCB order placed
Please,
Add me for 2 pieces,
Thank-you,
Bernard, F1EHX.
----- Original Message ----- From: "Stanley Reynolds"
stanley_reynolds@yahoo.com
To: "Discussion of precise time and frequency measurement" time-nuts@febo.com
Sent: Friday, July 02, 2010 6:46 PM
Subject: [time-nuts] PICTIC II PCB order placed
Oops, I didn't know this was on the list been getting a lot of off list stuff.
Some of my own emails to the list get lost before they get to me, others are
delayed this is a on going problem probably a yahoo spam filter overload.
UPDATE on order:
I have placed the order for more boards than needed and hope to receive them in
less than 2 weeks.
As far as shipping think it will be easy for me if we call it 1 USD per board. I
will let everyone gage when they need to mail their US funds check/money order.
If you are paying by paypal add 50 cents per board for a total of 9.50. No need
for payment till I receive the boards unless you are unsure how long it will
take for me to receive it.
Stanley Reynolds
225 Alpine Street
Birmingham, AL 35210
USA
If your software will only work with Irondale and not Birmingham this is OK
Stanley Reynolds
225 Alpine Street
Irondale, AL 35210
USA
paypal stanley_reynolds@yahoo.com
----- Original Message ----
From: Bob Bownes bownes@gmail.com
To: Discussion of precise time and frequency measurement time-nuts@febo.com
Sent: Fri, July 2, 2010 10:45:36 AM
Subject: Re: [time-nuts] Pic programing for the PICTIC II
Ok. I think there are a few of us who can/would program these up for
folks who need one.
On Fri, Jul 2, 2010 at 11:43 AM, Stanley Reynolds
stanley_reynolds@yahoo.com wrote:
Thank you but I have all I want to do with the boards later I may change my
mind.
Stanley
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Orange vous informe que cet e-mail a ete controle par l'anti-virus mail. Aucun
virus connu a ce jour par nos services n'a ete detecte.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
It looks like there's still a problem with the trimmers. R17 and R22
are shown as part # 3266P-1-502LF and the photo shows the proper type of
trimmer. The data sheet and the catalog page show that 3266P has the
adjustment parallel to the board rather than vertical. Mouser just used
the same picture for all styles of the 3266 line. There are others that
are in stock, but they're larger and I don't know if there's room for
them on the board.
Ed
Bob Bownes wrote:
Changed it to a different part that is available. Difference is RHoS
compliance method.
Changed the backordered 2n3906 as well. Shaved $0.02 off the total cost!
Bob
On Fri, Jul 2, 2010 at 3:17 PM, Bob Camp lists@rtty.us wrote:
Hi
It looks like it may be a while before the trim pots come in (12 weeks...).
The 3266X (side adjust rather than top adjust) is in stock. I'm not sure if
the layout is "side adjust" friendly or not.
Bob
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of Bob Bownes
Sent: Friday, July 02, 2010 2:54 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Pic programing for the PICTIC II
Folks,
I put together a mouser 'project' with all of the parts. This means
you can just go to the mouser site and order all the parts for the
project. No need for anyone to do a group buy of parts, re-pack and
re-distribute them. Here's how to get to it:
To access the project, click on the url listed below or copy and paste
it into your web browser:
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c7ada9ced0
Or you can access the project by going to http://www.mouser.com/ and
click on the EZ Buy option on the top navigation bar. You can also
click on this link or copy and paste it into your browser:
http://www.mouser.com/Tools/Tools.aspx. Then enter the following
access number listed below into the Project Access ID function.
c7ada9ced0
Total cost w/o shipping is $30.30.
On Fri, Jul 2, 2010 at 1:23 PM, Peter Vince pvince@theiet.org wrote:
Apologies for the previous incomplete message - somehow my laptop
trackpad jumped the cursor over the send button :-(
Better ?
How many16f688s are we talking here?
My thinking is less than 10 as only two people have asked.
Don't know how many have not asked.
I would also like a pre-programmed PIC please, if someone can arrange
that. Or ideally, a complete kit of parts, but as the previous
correspondent has written, I appreciate that is a lot of work.
Thanks,
Peter Vince (London, England)
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Hi
The closest thing I could find were the side adjust parts. They also have "flat on the board" parts and 3/8" squares. No sign of top adjust 1/4" parts ....
Bob
On Jul 7, 2010, at 1:09 AM, Ed Palmer wrote:
It looks like there's still a problem with the trimmers. R17 and R22 are shown as part # 3266P-1-502LF and the photo shows the proper type of trimmer. The data sheet and the catalog page show that 3266P has the adjustment parallel to the board rather than vertical. Mouser just used the same picture for all styles of the 3266 line. There are others that are in stock, but they're larger and I don't know if there's room for them on the board.
Ed
Bob Bownes wrote:
Changed it to a different part that is available. Difference is RHoS
compliance method.
Changed the backordered 2n3906 as well. Shaved $0.02 off the total cost!
Bob
On Fri, Jul 2, 2010 at 3:17 PM, Bob Camp lists@rtty.us wrote:
Hi
It looks like it may be a while before the trim pots come in (12 weeks...).
The 3266X (side adjust rather than top adjust) is in stock. I'm not sure if
the layout is "side adjust" friendly or not.
Bob
-----Original Message-----
From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On
Behalf Of Bob Bownes
Sent: Friday, July 02, 2010 2:54 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Pic programing for the PICTIC II
Folks,
I put together a mouser 'project' with all of the parts. This means
you can just go to the mouser site and order all the parts for the
project. No need for anyone to do a group buy of parts, re-pack and
re-distribute them. Here's how to get to it:
To access the project, click on the url listed below or copy and paste
it into your web browser:
http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c7ada9ced0
Or you can access the project by going to http://www.mouser.com/ and
click on the EZ Buy option on the top navigation bar. You can also
click on this link or copy and paste it into your browser:
http://www.mouser.com/Tools/Tools.aspx. Then enter the following
access number listed below into the Project Access ID function.
c7ada9ced0
Total cost w/o shipping is $30.30.
On Fri, Jul 2, 2010 at 1:23 PM, Peter Vince pvince@theiet.org wrote:
Apologies for the previous incomplete message - somehow my laptop
trackpad jumped the cursor over the send button :-(
Better ?
How many16f688s are we talking here?
My thinking is less than 10 as only two people have asked.
Don't know how many have not asked.
I would also like a pre-programmed PIC please, if someone can arrange
that. Or ideally, a complete kit of parts, but as the previous
correspondent has written, I appreciate that is a lot of work.
Thanks,
Peter Vince (London, England)
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.