I have had Awlgrip sprayed on removable teak and I have rolled and tipped on the non removable with good results. Can Imron be rolled and tipped? I would say no but I am no expert. R.Lee In a message dated 1/19/2008 8:08:03 P.M. Eastern Standard Time, rcrogers6@kennett.net writes: Bob, How many coats for the 3 year job? Since Sam is going to use CPES anyway, can he save on coats. FWIW, I know a builder who swears by Awlgrip Primer regardless of the top coats - which in his case are Interlux Perfection. Ron Rogers ----- Original Message ----- From: "bob england" <bob_england@hotmail.com> | It really won't matter, the teak will spit it off in about 4 years anyway, | that's if you seal it with cpes thouroughly then put about 5 coats of urethane | paint on it. Otherwise just painting it with urethane will last about 3 years. | ymmv, but I've been here and done this, a few times. _______________________________________________ http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering To unsubscribe or modify your subscription options (get password, change email address, etc) go to: http://lists.samurai.com/mailman/options/trawlers-and-trawlering Trawlers & Trawlering and T&T are trademarks of Water World Productions. Unauthorized use is prohibited. **************Start the year off right. Easy ways to stay in shape. http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489