usrp-users@lists.ettus.com
Discussion and technical support related to USRP, UHD, RFNoC
View all threadsUHD v4 Compiled
Hi,
After many years I've just got back into the world of Ettus. I've downloaded
and compiled v4 for using boost 1.70 with VS2019 for 32 and 64-bit flavours
of Windows.
I do understand that Windows is a minority target for UHD users, this is
confirming that it's fine with W10.
Simon Brown, G4ELI
Simon,
The current UHD 4 on master is not a released version, so be patient if you
run into any snags. That being said, you should be good to compile and run
on Windows. I put together a guide a little while ago for building on
Windows. It will almost certainly need some massaging for 4.0, but feel
free to message me directly at support@ettus.com if you need build
assistance. I'll try to roll that into a later version of the build
instructions:
All that being said, if you want to run on a released version, I'd
recommend building the 3.15.LTS branch.
Sam Reiter
On Fri, Feb 14, 2020 at 3:18 AM Simon G4ELI via USRP-users <
usrp-users@lists.ettus.com> wrote:
Hi,
After many years I’ve just got back into the world of Ettus. I’ve
downloaded and compiled v4 for using boost 1.70 with VS2019 for 32 and
64-bit flavours of Windows.
I do understand that Windows is a minority target for UHD users, this is
confirming that it’s fine with W10.
Simon Brown, G4ELI
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Hi Sam,
This really is confusing for a simple person such as myself. Anyway, all is good with v4 except the X310 and E310, maybe I’ll wait for the v4 code to catch up.
You suggest 3.15 LTS, why not 3.9 LTS?
The build info is somewhat out of date but I’m happy.
Simon Brown, G4ELI
From: Sam Reiter sam.reiter@ettus.com
Sent: 18 February 2020 16:04
To: simon@sdr-radio.com
Cc: usrp-users usrp-users@lists.ettus.com
Subject: Re: [USRP-users] UHD v4 Compiled
Simon,
The current UHD 4 on master is not a released version, so be patient if you run into any snags. That being said, you should be good to compile and run on Windows. I put together a guide a little while ago for building on Windows. It will almost certainly need some massaging for 4.0, but feel free to message me directly at support@ettus.com mailto:support@ettus.com if you need build assistance. I'll try to roll that into a later version of the build instructions:
All that being said, if you want to run on a released version, I'd recommend building the 3.15.LTS branch.
Sam Reiter
On Fri, Feb 14, 2020 at 3:18 AM Simon G4ELI via USRP-users <usrp-users@lists.ettus.com mailto:usrp-users@lists.ettus.com > wrote:
Hi,
After many years I’ve just got back into the world of Ettus. I’ve downloaded and compiled v4 for using boost 1.70 with VS2019 for 32 and 64-bit flavours of Windows.
I do understand that Windows is a minority target for UHD users, this is confirming that it’s fine with W10.
Simon Brown, G4ELI
USRP-users mailing list
USRP-users@lists.ettus.com mailto:USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
Ah,
I now assume 3.15 is more recent than 3.9, was thinking 3.15 and 3.90 😊 .
Simon Brown, G4ELI
From: simon@sdr-radio.com simon@sdr-radio.com
Sent: 18 February 2020 17:15
To: 'Sam Reiter' sam.reiter@ettus.com
Cc: 'usrp-users' usrp-users@lists.ettus.com
Subject: RE: [USRP-users] UHD v4 Compiled
Hi Sam,
This really is confusing for a simple person such as myself. Anyway, all is good with v4 except the X310 and E310, maybe I’ll wait for the v4 code to catch up.
You suggest 3.15 LTS, why not 3.9 LTS?
The build info is somewhat out of date but I’m happy.
Simon Brown, G4ELI
From: Sam Reiter <sam.reiter@ettus.com mailto:sam.reiter@ettus.com >
Sent: 18 February 2020 16:04
To: simon@sdr-radio.com mailto:simon@sdr-radio.com
Cc: usrp-users <usrp-users@lists.ettus.com mailto:usrp-users@lists.ettus.com >
Subject: Re: [USRP-users] UHD v4 Compiled
Simon,
The current UHD 4 on master is not a released version, so be patient if you run into any snags. That being said, you should be good to compile and run on Windows. I put together a guide a little while ago for building on Windows. It will almost certainly need some massaging for 4.0, but feel free to message me directly at support@ettus.com mailto:support@ettus.com if you need build assistance. I'll try to roll that into a later version of the build instructions:
All that being said, if you want to run on a released version, I'd recommend building the 3.15.LTS branch.
Sam Reiter
On Fri, Feb 14, 2020 at 3:18 AM Simon G4ELI via USRP-users <usrp-users@lists.ettus.com mailto:usrp-users@lists.ettus.com > wrote:
Hi,
After many years I’ve just got back into the world of Ettus. I’ve downloaded and compiled v4 for using boost 1.70 with VS2019 for 32 and 64-bit flavours of Windows.
I do understand that Windows is a minority target for UHD users, this is confirming that it’s fine with W10.
Simon Brown, G4ELI
USRP-users mailing list
USRP-users@lists.ettus.com mailto:USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
You got it.
3.9 is older and relatively simple (pre-RFNoC). It also has some latency
advantages compared to modern UHD / FPGA architectures. But all things
considered, 3.15.LTS is your best bet for getting started.
Sam
On Tue, Feb 18, 2020 at 11:40 AM simon@sdr-radio.com wrote:
Ah,
I now assume 3.15 is more recent than 3.9, was thinking 3.15 and 3.90 😊 .
Simon Brown, G4ELI
From: simon@sdr-radio.com simon@sdr-radio.com
Sent: 18 February 2020 17:15
To: 'Sam Reiter' sam.reiter@ettus.com
Cc: 'usrp-users' usrp-users@lists.ettus.com
Subject: RE: [USRP-users] UHD v4 Compiled
Hi Sam,
This really is confusing for a simple person such as myself. Anyway, all
is good with v4 except the X310 and E310, maybe I’ll wait for the v4 code
to catch up.
You suggest 3.15 LTS, why not 3.9 LTS?
The build info is somewhat out of date but I’m happy.
Simon Brown, G4ELI
From: Sam Reiter sam.reiter@ettus.com
Sent: 18 February 2020 16:04
To: simon@sdr-radio.com
Cc: usrp-users usrp-users@lists.ettus.com
Subject: Re: [USRP-users] UHD v4 Compiled
Simon,
The current UHD 4 on master is not a released version, so be patient if
you run into any snags. That being said, you should be good to compile and
run on Windows. I put together a guide a little while ago for building on
Windows. It will almost certainly need some massaging for 4.0, but feel
free to message me directly at support@ettus.com if you need build
assistance. I'll try to roll that into a later version of the build
instructions:
All that being said, if you want to run on a released version, I'd
recommend building the 3.15.LTS branch.
Sam Reiter
On Fri, Feb 14, 2020 at 3:18 AM Simon G4ELI via USRP-users <
usrp-users@lists.ettus.com> wrote:
Hi,
After many years I’ve just got back into the world of Ettus. I’ve
downloaded and compiled v4 for using boost 1.70 with VS2019 for 32 and
64-bit flavours of Windows.
I do understand that Windows is a minority target for UHD users, this is
confirming that it’s fine with W10.
Simon Brown, G4ELI
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com