Hi everyone,
For those who want to upgrade the Fury2 firmware, there is also a
command line open-source tools that works on Linux ( and I believe on
Windows )
This is the command line that I am using on linux :
lpc21isp mainFury_v1.12.hex /dev/ttyUSB0 38400 10000
I attached the source and you just have to compile it on your favorite
platform.
Regards,
Phil
[1]SAIDJACK@aol.com wrote:
In a message dated 10/22/2007 12:09:33 Pacific Daylight Time,
[2]xaos@darksmile.net writes:
The board looks very nice and I am trying to get it to work with
several OCXO units that I have.
Hi George, everyone,
Tom made some suggestions on the usability of the Fury2 firmware, and
we incorporated his suggestions in the latest firmware release rev.
1.12.
We also improved the stability for various oscillator types. It is
suggested for users to upgrade the Fury with PCB revision 2.0 to
firmware 1.12.
The binary firmware, as well as upgrade instructions are available on
our website at:
[3]http://www.jackson-labs.com/support.html
BTW: some browsers seem to have problems with the frames on our
website, we are working on the issue. It should still be possible to
click on the links, and download the files.
Sincerely,
Said
__________________________________________________________________
See what's new at [4]AOL.com and [5]Make AOL Your Homepage.
References
- mailto:SAIDJACK@aol.com
- mailto:xaos@darksmile.net
-
http://www.jackson-labs.com/support.html
-
http://www.aol.com/?NCID=AOLCMP00300000001170
-
http://www.aol.com/mksplash.adp?NCID=AOLCMP00300000001169
Hi everyone,
For those who want to upgrade the Fury2 firmware, there is also a
command line open-source tools that works on Linux ( and I believe on
Windows )
This is the command line that I am using on linux :
lpc21isp mainFury_v1.12.hex /dev/ttyUSB0 38400 10000
I attached the source and you just have to compile it on your favorite
platform.
Regards,
Phil
[1]SAIDJACK@aol.com wrote:
In a message dated 10/22/2007 12:09:33 Pacific Daylight Time,
[2]xaos@darksmile.net writes:
>The board looks very nice and I am trying to get it to work with
>several OCXO units that I have.
Hi George, everyone,
Tom made some suggestions on the usability of the Fury2 firmware, and
we incorporated his suggestions in the latest firmware release rev.
1.12.
We also improved the stability for various oscillator types. It is
suggested for users to upgrade the Fury with PCB revision 2.0 to
firmware 1.12.
The binary firmware, as well as upgrade instructions are available on
our website at:
[3]http://www.jackson-labs.com/support.html
BTW: some browsers seem to have problems with the frames on our
website, we are working on the issue. It should still be possible to
click on the links, and download the files.
Sincerely,
Said
__________________________________________________________________
See what's new at [4]AOL.com and [5]Make AOL Your Homepage.
References
1. mailto:SAIDJACK@aol.com
2. mailto:xaos@darksmile.net
3. http://www.jackson-labs.com/support.html
4. http://www.aol.com/?NCID=AOLCMP00300000001170
5. http://www.aol.com/mksplash.adp?NCID=AOLCMP00300000001169
