Dear all, I'm using PJSIP to develop a SIP phone. My system uses RTCP-XR to handle the quality of the call. As I know, PJSIP 0.9.0 supports RTCP-XR; but when using the last release (0.9.0) of this library, I recorginze that: although PJSIP provides us MOS and R Factor values, but these values always return "N/A" value to us. That means, I can not use RTCP-XR fearture of this library to capture call quality. Further more, as default, it seems that PJSIP does not support RTCP-XR by defining as following in the file config.h: /** * Specify whether RTCP XR support should be built into PJMEDIA. Disabling * this feature will reduce footprint slightly. Note that even when this * setting is enabled, RTCP XR processing will only be performed in stream * if it is enabled on run-time on per stream basis. See * PJMEDIA_STREAM_ENABLE_XR setting for more info. * * Default: 1 (yes). */ #ifndef PJMEDIA_HAS_RTCP_XR # define PJMEDIA_HAS_RTCP_XR 0 #endif /** * The RTCP XR feature is activated and used by stream if \a enable_rtcp_xr * field of \a pjmedia_stream_info structure is non-zero. This setting * controls the default value of this field. * * Default: 0 (disabled) */ #ifndef PJMEDIA_STREAM_ENABLE_XR # define PJMEDIA_STREAM_ENABLE_XR 0 #endif If I want to use RTCP-XR, I have to change these define to: #ifndef PJMEDIA_HAS_RTCP_XR # define PJMEDIA_HAS_RTCP_XR 1 #endif #ifndef PJMEDIA_STREAM_ENABLE_XR # define PJMEDIA_STREAM_ENABLE_XR 1 #endif So, my question is: Does PJSIP support RTCP-XR totally? If YES, how to get MOS and R-Factor values from PJSIP? Thanks so much QUANG Luong Thanh

Hi Quang, Unfortunately the call quality settings in VoIP metrics report block hasn't provided call quality calculation, currently it only provides API to set call quality values from external calculation, see pjmedia_rtcp_xr_update_info(). Any contributions on this will be greatly appreciated :) Moreover, report blocks containing RLE (or per packet analysis) are not supported, thus only last four reports block are supported (with a note as mentioned above). Regards, nanang On 04/07/2008, Quang Luong Thanh <ltquang@tma.com.vn> wrote: > > Dear all, > I'm using PJSIP to develop a SIP phone. My system uses RTCP-XR to handle the > quality of the call. As I know, PJSIP 0.9.0 supports RTCP-XR; but when using > the last release (0.9.0) of this library, I recorginze that: although PJSIP > provides us MOS and R Factor values, but these values always return "N/A" > value to us. That means, I can not use RTCP-XR fearture of this library to > capture call quality. > Further more, as default, it seems that PJSIP does not support RTCP-XR by > defining as following in the file config.h: > > > > /** > * Specify whether RTCP XR support should be built into PJMEDIA. Disabling > * this feature will reduce footprint slightly. Note that even when this > * setting is enabled, RTCP XR processing will only be performed in stream > * if it is enabled on run-time on per stream basis. See > * PJMEDIA_STREAM_ENABLE_XR setting for more info. > * > * Default: 1 (yes). > */ > #ifndef PJMEDIA_HAS_RTCP_XR > # define PJMEDIA_HAS_RTCP_XR 0 > #endif > > > /** > * The RTCP XR feature is activated and used by stream if \a enable_rtcp_xr > * field of \a pjmedia_stream_info structure is non-zero. This setting > * controls the default value of this field. > * > * Default: 0 (disabled) > */ > #ifndef PJMEDIA_STREAM_ENABLE_XR > # define PJMEDIA_STREAM_ENABLE_XR 0 > #endif > > > If I want to use RTCP-XR, I have to change these define to: > > #ifndef PJMEDIA_HAS_RTCP_XR > # define PJMEDIA_HAS_RTCP_XR 1 > #endif > > #ifndef PJMEDIA_STREAM_ENABLE_XR > # define PJMEDIA_STREAM_ENABLE_XR 1 > #endif > > > So, my question is: Does PJSIP support RTCP-XR totally? If YES, how to get > MOS and R-Factor values from PJSIP? > > Thanks so much > > QUANG Luong Thanh > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip@lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > >