https://www.sv1afn.com/en/gnss-gps/-7.html

    Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin

I might have misunderstood the device. Says: The band-pass filters used are wide enough to let this splitter work with all frequency channels assigned for commercial use (GPS at 1575.42 MHZ, Beidou at 1561.098 MHZ, GLONASS at 1602 MHZ center frequency and Galileo at 1575.42 +/- 12.3 MHZ. I’ll need to do more research Sorry and thanks for bandwidth Sent from my iPhone > On Jun 2, 2021, at 7:12 PM, Gary E. Miller <gem@rellim.com> wrote: > > Yo W7SLS! > >> On Wed, 2 Jun 2021 17:42:20 -0700 >> W7SLS <w7sls.scott@gmail.com> wrote: >> >> I chose to buy a pre-made splitter, that I learned about from a >> message off-list: >> >> https://www.sv1afn.com/en/gnss-gps/-7.html > > You really want an L1 only splitter? > > RGDS > GARY > --------------------------------------------------------------------------- > Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703 > gem@rellim.com Tel:+1 541 382 8588 > > Veritas liberabit vos. -- Quid est veritas? > "If you can't measure it, you can't improve it." - Lord Kelvin > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an email to time-nuts-leave@lists.febo.com > To unsubscribe, go to and follow the instructions there.

    Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin

Yo W7SLS! On Wed, 2 Jun 2021 19:44:17 -0700 W7SLS <w7sls.scott@gmail.com> wrote: > The band-pass filters used are wide enough to let this splitter work > with all frequency channels assigned for commercial use (GPS at > 1575.42 MHZ, Beidou at 1561.098 MHZ, GLONASS at 1602 MHZ center > frequency and Galileo at 1575.42 +/- 12.3 MHZ. Yes, those are the L1 bands, but newer GNSS receivers also use L2, L5, E6, etc. Here is a good list of frequencies: https://www.rfwireless-world.com/Terminology/GPS-Frequency-Band-and-GNSS-Frequency-Band.html You can buy good receivers for L1/L2, or L1/L5, for well under what that splitter/amplifier will cost you. You will own one soon. RGDS GARY --------------------------------------------------------------------------- Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703 gem@rellim.com Tel:+1 541 382 8588 Veritas liberabit vos. -- Quid est veritas? "If you can't measure it, you can't improve it." - Lord Kelvin

https://www.sv1afn.com/en/gnss-gps/-7.html

    Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin

Hi, A nice diagram of the bands is available at: https://www.everythingrf.com/community/gps-frequency-bands -- Sanjeev Gupta +65 98551208 http://www.linkedin.com/in/ghane On Thu, Jun 3, 2021 at 10:44 AM W7SLS <w7sls.scott@gmail.com> wrote: > I might have misunderstood the device. Says: > > The band-pass filters used are wide enough to let this splitter work with > all frequency channels assigned for commercial use (GPS at 1575.42 MHZ, > Beidou at 1561.098 MHZ, GLONASS at 1602 MHZ center frequency and Galileo at > 1575.42 +/- 12.3 MHZ. > > I’ll need to do more research > > Sorry and thanks for bandwidth > > Sent from my iPhone > > > On Jun 2, 2021, at 7:12 PM, Gary E. Miller <gem@rellim.com> wrote: > > > > Yo W7SLS! > > > >> On Wed, 2 Jun 2021 17:42:20 -0700 > >> W7SLS <w7sls.scott@gmail.com> wrote: > >> > >> I chose to buy a pre-made splitter, that I learned about from a > >> message off-list: > >> > >> https://www.sv1afn.com/en/gnss-gps/-7.html > > > > You really want an L1 only splitter? > > > > RGDS > > GARY > > > --------------------------------------------------------------------------- > > Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703 > > gem@rellim.com Tel:+1 541 382 8588 > > > > Veritas liberabit vos. -- Quid est veritas? > > "If you can't measure it, you can't improve it." - Lord Kelvin > > _______________________________________________ > > time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe > send an email to time-nuts-leave@lists.febo.com > > To unsubscribe, go to and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send > an email to time-nuts-leave@lists.febo.com > To unsubscribe, go to and follow the instructions there.