https://www.sv1afn.com/en/gnss-gps/10-mhz-distribution-amplifier.html has other interesting stuff... ------------ The whole world is a straight man. ---------------------- Dr. Don Latham AJ7LL PO Box 404, Frenchtown, MT, 59834 VOX: 406-626-4304

I have had good luck with the TAPR amp. https://tapr.org/product/tadd-1-rf-distribution-amplifier/ On Friday, September 24, 2021, djl <djl@montana.com> wrote: > > https://www.sv1afn.com/en/gnss-gps/10-mhz-distribution-amplifier.html > has other interesting stuff... > ------------ > >

I use an analog video distribution amplifier   it has one input and 8 outputs.  I got it at a ham radio swap meet for $5.00 and it works great.  It has BNC input and outputs and a built-in power supply. Sent from my Verizon, Samsung Galaxy smartphone by Morse code. -------- Original message --------From: Louis Taber <ltaber@gmail.com> Date: 9/25/21 6:47 PM (GMT-08:00) To: Discussion of precise time and frequency measurement <time-nuts@lists.febo.com> Subject: [time-nuts] Re: 10 mhz distribution I have had good luck with the TAPR amp.https://tapr.org/product/tadd-1-rf-distribution-amplifier/On Friday, September 24, 2021, djl <djl@montana.com> wrote:>> https://www.sv1afn.com/en/gnss-gps/10-mhz-distribution-amplifier.html> has other interesting stuff...> ------------>>_______________________________________________time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an email to time-nuts-leave@lists.febo.comTo unsubscribe, go to and follow the instructions there.

I have used some TV baseband distribution amps. The first one I tried wasn't good though, due to it's DC restoration function, based on the sync tips. It resulted in distortion towards the positive end of the 10MHz sin, though it may be possible to find a compromise signal strength that is OK, or to modify the DC restorer. On Sun, Sep 26, 2021 at 5:43 PM jack.davis <jack.davis@engineer.com> wrote: > I use an analog video distribution amplifier it has one input and 8 > outputs. I got it at a ham radio swap meet for $5.00 and it works great. > It has BNC input and outputs and a built-in power supply. Sent from my > Verizon, Samsung Galaxy smartphone by Morse code. > -------- Original message --------From: Louis Taber <ltaber@gmail.com> > Date: 9/25/21 6:47 PM (GMT-08:00) To: Discussion of precise time and > frequency measurement <time-nuts@lists.febo.com> Subject: [time-nuts] Re: > 10 mhz distribution I have had good luck with the TAPR amp. > https://tapr.org/product/tadd-1-rf-distribution-amplifier/On Friday, > September 24, 2021, djl <djl@montana.com> wrote:>> > https://www.sv1afn.com/en/gnss-gps/10-mhz-distribution-amplifier.html> > has other interesting stuff...> > ------------>>_______________________________________________time-nuts > mailing list -- time-nuts@lists.febo.com -- To unsubscribe send an email > to time-nuts-leave@lists.febo.comTo unsubscribe, go to and follow the > instructions there. > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com -- To unsubscribe send > an email to time-nuts-leave@lists.febo.com > To unsubscribe, go to and follow the instructions there.