time-nuts@lists.febo.com

Discussion of precise time and frequency measurement

View all threads

Help support the microwave addiction.

LN
Lizeth Norman
Sun, Dec 9, 2012 12:59 AM

Hi all!

Having finally moved and having been able to sort the stuff, there's
some goodies for sale:
Do have a few more items that would be of interest to the time and
frequency folks, but here's the first two.

I have two Shera based gpsdo kits available. One board is built,
tested and working.  The other is a complete kit of all parts and the
A+A engineering pc board.

Included in each kit:
1 HP 10811a-60111
1 sma unknown 5v active patch gps L1 antenna
1 HP 58535a gps active splitter
1 Motorola M12+T gps receiver

The built kit gets an HP rack mount enclosure with a LCD display of
the efc voltage. Feel free to use the boards inside, but as you will
see, it was my first attempt at a partial kit where YOU the builder
must buy to spec and then integrate according to a plan. Looks like
hell. Works ok, though..

Would like to trade for equipment. Particularly microwave attenuators,
mixers, preamps. Will trade + cash for a signal generator good to 18
GHz.

Kit one (built board with enclosure and power supply. Ask for photos.)
$250
Kit two
$210

All reasonable offers considered.

Hi all! Having finally moved and having been able to sort the stuff, there's some goodies for sale: Do have a few more items that would be of interest to the time and frequency folks, but here's the first two. I have two Shera based gpsdo kits available. One board is built, tested and working. The other is a complete kit of all parts and the A+A engineering pc board. Included in each kit: 1 HP 10811a-60111 1 sma unknown 5v active patch gps L1 antenna 1 HP 58535a gps active splitter 1 Motorola M12+T gps receiver The built kit gets an HP rack mount enclosure with a LCD display of the efc voltage. Feel free to use the boards inside, but as you will see, it was my first attempt at a partial kit where YOU the builder must buy to spec and then integrate according to a plan. Looks like hell. Works ok, though.. Would like to trade for equipment. Particularly microwave attenuators, mixers, preamps. Will trade + cash for a signal generator good to 18 GHz. Kit one (built board with enclosure and power supply. Ask for photos.) $250 Kit two $210 All reasonable offers considered.
EM
Edgardo Molina
Sun, Dec 9, 2012 1:41 AM

Hi,

May I see pictures of both kits off list please?  xe1xus at amsat dot org Thanks.

Regards,

Edgardo Molina
Dirección IPTEL

www.iptel.net.mx

T : 55 55 55202444
M : 04455 10045822

Piensa en Bits SA de CV

Información anexa:

CONFIDENCIALIDAD DE INFORMACION

Este mensaje tiene carácter confidencial. Si usted no es el destinarario de este mensaje, le suplicamos se lo notifique al remitente mediante un correo electrónico y que borre el presente mensaje y sus anexos de su computadora sin retener una copia de los mismos. Queda estrictamente prohibido copiar este mensaje o hacer usode el para cualquier propósito o divulgar su en forma parcial o total su contenido. Gracias.

NON-DISCLOSURE OF INFORMATION

This email is strictly confidential and may also be privileged. If you are not the intended recipient please immediately advise the sender by replying to this e-mail and then deleting the message and its attachments from your computer without keeping a copy. It is strictly forbidden to copy it or use it for any purpose or disclose its contents to any third party. Thank you.

On Dec 8, 2012, at 6:59 PM, Lizeth Norman normanlizeth@gmail.com wrote:

Hi all!

Having finally moved and having been able to sort the stuff, there's
some goodies for sale:
Do have a few more items that would be of interest to the time and
frequency folks, but here's the first two.

I have two Shera based gpsdo kits available. One board is built,
tested and working.  The other is a complete kit of all parts and the
A+A engineering pc board.

Included in each kit:
1 HP 10811a-60111
1 sma unknown 5v active patch gps L1 antenna
1 HP 58535a gps active splitter
1 Motorola M12+T gps receiver

The built kit gets an HP rack mount enclosure with a LCD display of
the efc voltage. Feel free to use the boards inside, but as you will
see, it was my first attempt at a partial kit where YOU the builder
must buy to spec and then integrate according to a plan. Looks like
hell. Works ok, though..

Would like to trade for equipment. Particularly microwave attenuators,
mixers, preamps. Will trade + cash for a signal generator good to 18
GHz.

Kit one (built board with enclosure and power supply. Ask for photos.)
$250
Kit two
$210

All reasonable offers considered.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Hi, May I see pictures of both kits off list please? xe1xus at amsat dot org Thanks. Regards, Edgardo Molina Dirección IPTEL www.iptel.net.mx T : 55 55 55202444 M : 04455 10045822 Piensa en Bits SA de CV Información anexa: CONFIDENCIALIDAD DE INFORMACION Este mensaje tiene carácter confidencial. Si usted no es el destinarario de este mensaje, le suplicamos se lo notifique al remitente mediante un correo electrónico y que borre el presente mensaje y sus anexos de su computadora sin retener una copia de los mismos. Queda estrictamente prohibido copiar este mensaje o hacer usode el para cualquier propósito o divulgar su en forma parcial o total su contenido. Gracias. NON-DISCLOSURE OF INFORMATION This email is strictly confidential and may also be privileged. If you are not the intended recipient please immediately advise the sender by replying to this e-mail and then deleting the message and its attachments from your computer without keeping a copy. It is strictly forbidden to copy it or use it for any purpose or disclose its contents to any third party. Thank you. On Dec 8, 2012, at 6:59 PM, Lizeth Norman <normanlizeth@gmail.com> wrote: > Hi all! > > Having finally moved and having been able to sort the stuff, there's > some goodies for sale: > Do have a few more items that would be of interest to the time and > frequency folks, but here's the first two. > > I have two Shera based gpsdo kits available. One board is built, > tested and working. The other is a complete kit of all parts and the > A+A engineering pc board. > > Included in each kit: > 1 HP 10811a-60111 > 1 sma unknown 5v active patch gps L1 antenna > 1 HP 58535a gps active splitter > 1 Motorola M12+T gps receiver > > The built kit gets an HP rack mount enclosure with a LCD display of > the efc voltage. Feel free to use the boards inside, but as you will > see, it was my first attempt at a partial kit where YOU the builder > must buy to spec and then integrate according to a plan. Looks like > hell. Works ok, though.. > > Would like to trade for equipment. Particularly microwave attenuators, > mixers, preamps. Will trade + cash for a signal generator good to 18 > GHz. > > Kit one (built board with enclosure and power supply. Ask for photos.) > $250 > Kit two > $210 > > All reasonable offers considered. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.
LN
Lizeth Norman
Sun, Dec 9, 2012 7:57 AM
Pictures at: http://www.flickr.com/photos/n3ykf/
S
shalimr9@gmail.com
Mon, Dec 10, 2012 5:23 PM

Is shipped, tracking number
1Z30VR960337713831
due Wednesday

Didier

Sent from my Droid Razr 4G LTE wireless tracker.

Is shipped, tracking number 1Z30VR960337713831 due Wednesday Didier Sent from my Droid Razr 4G LTE wireless tracker.
D
dlewis6767
Mon, Dec 10, 2012 6:06 PM

Thanks, Didier, ....if you ever find a mainframe for it, please keep me in
mind.

Thanks, ....-Don


From: shalimr9@gmail.com
Sent: Monday, December 10, 2012 11:23 AM
To: "Discussion of precise time and frequency measurement"
time-nuts@febo.com
Subject: [time-nuts] Counter

Is shipped, tracking number
1Z30VR960337713831
due Wednesday

Didier

Sent from my Droid Razr 4G LTE wireless tracker.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Thanks, Didier, ....if you ever find a mainframe for it, please keep me in mind. Thanks, ....-Don -------------------------------------------------- From: <shalimr9@gmail.com> Sent: Monday, December 10, 2012 11:23 AM To: "Discussion of precise time and frequency measurement" <time-nuts@febo.com> Subject: [time-nuts] Counter > > Is shipped, tracking number > 1Z30VR960337713831 > due Wednesday > > Didier > > Sent from my Droid Razr 4G LTE wireless tracker. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.
DJ
Didier Juges
Mon, Dec 10, 2012 6:14 PM

Well, that obviously went to the wrong place.
That was a private message, sorry for the bandwidth.

Didier

On Mon, Dec 10, 2012 at 12:06 PM, dlewis6767 dlewis6767@austin.rr.comwrote:

Thanks, Didier, ....if you ever find a mainframe for it, please keep me in
mind.

Thanks, ....-Don

------------------------------**--------------------
From: shalimr9@gmail.com
Sent: Monday, December 10, 2012 11:23 AM
To: "Discussion of precise time and frequency measurement" <
time-nuts@febo.com>
Subject: [time-nuts] Counter

Is shipped, tracking number
1Z30VR960337713831
due Wednesday

Didier

Sent from my Droid Razr 4G LTE wireless tracker.

_____________**
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/**
mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_____________**
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/**
mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Well, that obviously went to the wrong place. That was a private message, sorry for the bandwidth. Didier On Mon, Dec 10, 2012 at 12:06 PM, dlewis6767 <dlewis6767@austin.rr.com>wrote: > Thanks, Didier, ....if you ever find a mainframe for it, please keep me in > mind. > > Thanks, ....-Don > > > > > ------------------------------**-------------------- > From: <shalimr9@gmail.com> > Sent: Monday, December 10, 2012 11:23 AM > To: "Discussion of precise time and frequency measurement" < > time-nuts@febo.com> > Subject: [time-nuts] Counter > > >> Is shipped, tracking number >> 1Z30VR960337713831 >> due Wednesday >> >> Didier >> >> Sent from my Droid Razr 4G LTE wireless tracker. >> >> ______________________________**_________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/** >> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >> and follow the instructions there. >> > > > ______________________________**_________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/** > mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> > and follow the instructions there. >