Hi, I am trying to send an rectangular impulse through NI USRP 2901 to check the effects of wideband channel on the receiver. As the wideband channel becomes visible only when we increase the sampling rate/bandwidth of the system so I wanted to know that what is the maximum sampling rate supported by NI USRP 2901 ? Regards, Ammar

Hello Ammar, The specifications for the NI USRP 2901 can be found at the following link: http://www.ni.com/pdf/manuals/374925b.pdf The support library has a number of documents which may be useful to you. http://www.ni.com/en-us/support/model.usrp-2901.html Additionally for more information about the hardware you can look on the Ettus Knowledge Base. The NI USRP 2901 is the same hardware as the B210, but with different software support out of the box. https://kb.ettus.com/B200/B210/B200mini/B205mini The maximum sample rate is 61.44 MS/s when in single channel mode. Depending on the software support and your hardware it may only be possible to achieve these rates in bursts. Regards, Derek On Tue, Apr 25, 2017 at 7:33 AM, Ammar Mahmood via USRP-users < usrp-users@lists.ettus.com> wrote: > Hi, > > I am trying to send an rectangular impulse through NI USRP 2901 to check > the effects of wideband channel on the receiver. As the wideband channel > becomes visible only when we increase the sampling rate/bandwidth of > the system so I wanted to know that what is the maximum sampling rate > supported by NI USRP 2901 ? > > > Regards, > Ammar > > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >