FW: Problem in registering PJSIP with Asterisk server

S
Senthil
Fri, Apr 10, 2009 9:27 AM

Dear Atik,

Any updates on this issue,

Thanks,

  • Senthil


From: pjsip-bounces@lists.pjsip.org [mailto:pjsip-bounces@lists.pjsip.org]
On Behalf Of Senthil
Sent: Thursday, April 09, 2009 9:45 PM
To: 'atik'; pjsip@lists.pjsip.org
Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server

Hi Atik,

Thanks for the suggestion, that worked, now I'm able to register to Asterisk
server. But the problem is I'm not able to place a call to a X-lite phone
which is connected to the same domain. I received the following error while
trying to place call. Any suggestions?

Pjsua-app.c call3 is disconnected reason=403 (forbidden)

Again thanks for the help.

Regards,

  • Senthil


From: atik [mailto:atik.khan@gmail.com]
Sent: Thursday, April 09, 2009 8:51 PM
To: senthil@gotouchpoint.com; pjsip list
Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server

try this in your username.cfg

--id sip:senthil@192.168.100.102:5060
--registrar sip:192.168.100.102:5060
--realm *
--username senthil
--password 1234

On Thu, Apr 9, 2009 at 7:52 PM, senthil@gotouchpoint.com
senthil@gotouchpoint.com wrote:

Dear All,

I've downloaded PJSIP 1.1 software and followed the installation to build
the software. The linux kernel version is 2.6.18-8.el5. I've successfully
built the software but I'm not able to register PJSIP with Asterisk Open
Source PBX.

Error under PJSIP side:

--end msg--

16:43:53.255 pjsua_acc.c SIP registration failed, status = 404 (Not found)

Error under Asterisk side:

[Apr 9 16:58:22] NOTICE[7426]: Chan_sip_c:14491
handle_request_register:Registration from'SIP:192.168.100.14' failed for
'192.168.100.14' - No matchine peer found

Necessary configuration files attached.

Any valuable suggestion is greatly appreciated.

Thanks & Regards,

  • Senthil

mail2web - Check your email from the web at
http://link.mail2web.com/mail2web


Visit our blog: http://blog.pjsip.org

pjsip mailing list
pjsip@lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org

Dear Atik, Any updates on this issue, Thanks, - Senthil _____ From: pjsip-bounces@lists.pjsip.org [mailto:pjsip-bounces@lists.pjsip.org] On Behalf Of Senthil Sent: Thursday, April 09, 2009 9:45 PM To: 'atik'; pjsip@lists.pjsip.org Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server Hi Atik, Thanks for the suggestion, that worked, now I'm able to register to Asterisk server. But the problem is I'm not able to place a call to a X-lite phone which is connected to the same domain. I received the following error while trying to place call. Any suggestions? Pjsua-app.c call3 is disconnected reason=403 (forbidden) Again thanks for the help. Regards, - Senthil _____ From: atik [mailto:atik.khan@gmail.com] Sent: Thursday, April 09, 2009 8:51 PM To: senthil@gotouchpoint.com; pjsip list Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server try this in your username.cfg --id sip:senthil@192.168.100.102:5060 --registrar sip:192.168.100.102:5060 --realm * --username senthil --password 1234 On Thu, Apr 9, 2009 at 7:52 PM, senthil@gotouchpoint.com <senthil@gotouchpoint.com> wrote: Dear All, I've downloaded PJSIP 1.1 software and followed the installation to build the software. The linux kernel version is 2.6.18-8.el5. I've successfully built the software but I'm not able to register PJSIP with Asterisk Open Source PBX. Error under PJSIP side: --end msg-- 16:43:53.255 pjsua_acc.c SIP registration failed, status = 404 (Not found) Error under Asterisk side: [Apr 9 16:58:22] NOTICE[7426]: Chan_sip_c:14491 handle_request_register:Registration from'<SIP:192.168.100.14>' failed for '192.168.100.14' - No matchine peer found Necessary configuration files attached. Any valuable suggestion is greatly appreciated. Thanks & Regards, - Senthil -------------------------------------------------------------------- mail2web - Check your email from the web at http://link.mail2web.com/mail2web _______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip@lists.pjsip.org http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
A
atik
Fri, Apr 10, 2009 9:38 AM

can u send your new pjsip config file?

On Fri, Apr 10, 2009 at 5:27 PM, Senthil senthil@gotouchpoint.com wrote:

Dear Atik,

Any updates on this issue,

Thanks,

  • Senthil

From: pjsip-bounces@lists.pjsip.org [mailto:
pjsip-bounces@lists.pjsip.org] *On Behalf Of *Senthil
Sent: Thursday, April 09, 2009 9:45 PM
To: 'atik'; pjsip@lists.pjsip.org

Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server

Hi Atik,

Thanks for the suggestion, that worked, now I’m able to register to
Asterisk server. But the problem is I’m not able to place a call to a X-lite
phone which is connected to the same domain. I received the following error
while trying to place call. Any suggestions?

Pjsua-app.c call3 is disconnected reason=403 (forbidden)

Again thanks for the help.

Regards,

  • Senthil

From: atik [mailto:atik.khan@gmail.com]
Sent: Thursday, April 09, 2009 8:51 PM
To: senthil@gotouchpoint.com; pjsip list
Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server

try this in your username.cfg

--id sip:senthil@192.168.100.102:5060
--registrar sip:192.168.100.102:5060
--realm *
--username senthil
--password 1234

On Thu, Apr 9, 2009 at 7:52 PM, senthil@gotouchpoint.com <
senthil@gotouchpoint.com> wrote:

Dear All,

I've downloaded PJSIP 1.1 software and followed the installation to build
the software. The linux kernel version is 2.6.18-8.el5. I've successfully
built the software but I'm not able to register PJSIP with Asterisk Open
Source PBX.

Error under PJSIP side:

--end msg--

16:43:53.255 pjsua_acc.c SIP registration failed, status = 404 (Not found)

Error under Asterisk side:

[Apr 9 16:58:22] NOTICE[7426]: Chan_sip_c:14491
handle_request_register:Registration from'SIP:192.168.100.14' failed for
'192.168.100.14' - No matchine peer found

Necessary configuration files attached.

Any valuable suggestion is greatly appreciated.

Thanks & Regards,

  • Senthil

mail2web - Check your email from the web at
http://link.mail2web.com/mail2web


Visit our blog: http://blog.pjsip.org

pjsip mailing list
pjsip@lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org


Visit our blog: http://blog.pjsip.org

pjsip mailing list
pjsip@lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org

can u send your new pjsip config file? On Fri, Apr 10, 2009 at 5:27 PM, Senthil <senthil@gotouchpoint.com> wrote: > Dear Atik, > > > > Any updates on this issue, > > > > Thanks, > > - Senthil > > > ------------------------------ > > *From:* pjsip-bounces@lists.pjsip.org [mailto: > pjsip-bounces@lists.pjsip.org] *On Behalf Of *Senthil > *Sent:* Thursday, April 09, 2009 9:45 PM > *To:* 'atik'; pjsip@lists.pjsip.org > > *Subject:* Re: [pjsip] Problem in registering PJSIP with Asterisk server > > > > Hi Atik, > > > > Thanks for the suggestion, that worked, now I’m able to register to > Asterisk server. But the problem is I’m not able to place a call to a X-lite > phone which is connected to the same domain. I received the following error > while trying to place call. Any suggestions? > > > > Pjsua-app.c call3 is disconnected reason=403 (forbidden) > > > > Again thanks for the help. > > > > Regards, > > - Senthil > > > ------------------------------ > > *From:* atik [mailto:atik.khan@gmail.com] > *Sent:* Thursday, April 09, 2009 8:51 PM > *To:* senthil@gotouchpoint.com; pjsip list > *Subject:* Re: [pjsip] Problem in registering PJSIP with Asterisk server > > > > try this in your username.cfg > > --id sip:senthil@192.168.100.102:5060 > --registrar sip:192.168.100.102:5060 > --realm * > --username senthil > --password 1234 > > On Thu, Apr 9, 2009 at 7:52 PM, senthil@gotouchpoint.com < > senthil@gotouchpoint.com> wrote: > > Dear All, > > I've downloaded PJSIP 1.1 software and followed the installation to build > the software. The linux kernel version is 2.6.18-8.el5. I've successfully > built the software but I'm not able to register PJSIP with Asterisk Open > Source PBX. > > Error under PJSIP side: > > --end msg-- > > 16:43:53.255 pjsua_acc.c SIP registration failed, status = 404 (Not found) > > Error under Asterisk side: > > [Apr 9 16:58:22] NOTICE[7426]: Chan_sip_c:14491 > handle_request_register:Registration from'<SIP:192.168.100.14>' failed for > '192.168.100.14' - No matchine peer found > > Necessary configuration files attached. > > Any valuable suggestion is greatly appreciated. > > Thanks & Regards, > - Senthil > > > > -------------------------------------------------------------------- > mail2web - Check your email from the web at > http://link.mail2web.com/mail2web > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip@lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip@lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > >
S
Senthil
Fri, Apr 10, 2009 9:47 AM

Dear Atik,

Please find the attachment.

One more question. For example I want to call from PJSIP to a VOIP Phone
(i.e a phone number is configured (15201 like that) not identified by IP
address), in such situation how should I place a call.

Thanks for your help,

Regards,

-Senthil


From: pjsip-bounces@lists.pjsip.org [mailto:pjsip-bounces@lists.pjsip.org]
On Behalf Of atik
Sent: Friday, April 10, 2009 3:09 PM
To: pjsip list
Subject: Re: [pjsip] FW: Problem in registering PJSIP with Asterisk server

can u send your new pjsip config file?

On Fri, Apr 10, 2009 at 5:27 PM, Senthil senthil@gotouchpoint.com wrote:

Dear Atik,

Any updates on this issue,

Thanks,

  • Senthil


From: pjsip-bounces@lists.pjsip.org [mailto:pjsip-bounces@lists.pjsip.org]
On Behalf Of Senthil
Sent: Thursday, April 09, 2009 9:45 PM
To: 'atik'; pjsip@lists.pjsip.org

Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server

Hi Atik,

Thanks for the suggestion, that worked, now I'm able to register to Asterisk
server. But the problem is I'm not able to place a call to a X-lite phone
which is connected to the same domain. I received the following error while
trying to place call. Any suggestions?

Pjsua-app.c call3 is disconnected reason=403 (forbidden)

Again thanks for the help.

Regards,

  • Senthil


From: atik [mailto:atik.khan@gmail.com]
Sent: Thursday, April 09, 2009 8:51 PM
To: senthil@gotouchpoint.com; pjsip list
Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server

try this in your username.cfg

--id sip:senthil@192.168.100.102:5060
--registrar sip:192.168.100.102:5060
--realm *
--username senthil
--password 1234

On Thu, Apr 9, 2009 at 7:52 PM, senthil@gotouchpoint.com
senthil@gotouchpoint.com wrote:

Dear All,

I've downloaded PJSIP 1.1 software and followed the installation to build
the software. The linux kernel version is 2.6.18-8.el5. I've successfully
built the software but I'm not able to register PJSIP with Asterisk Open
Source PBX.

Error under PJSIP side:

--end msg--

16:43:53.255 pjsua_acc.c SIP registration failed, status = 404 (Not found)

Error under Asterisk side:

[Apr 9 16:58:22] NOTICE[7426]: Chan_sip_c:14491
handle_request_register:Registration from'SIP:192.168.100.14' failed for
'192.168.100.14' - No matchine peer found

Necessary configuration files attached.

Any valuable suggestion is greatly appreciated.

Thanks & Regards,

  • Senthil

mail2web - Check your email from the web at
http://link.mail2web.com/mail2web


Visit our blog: http://blog.pjsip.org

pjsip mailing list
pjsip@lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org


Visit our blog: http://blog.pjsip.org

pjsip mailing list
pjsip@lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org

Dear Atik, Please find the attachment. One more question. For example I want to call from PJSIP to a VOIP Phone (i.e a phone number is configured (15201 like that) not identified by IP address), in such situation how should I place a call. Thanks for your help, Regards, -Senthil _____ From: pjsip-bounces@lists.pjsip.org [mailto:pjsip-bounces@lists.pjsip.org] On Behalf Of atik Sent: Friday, April 10, 2009 3:09 PM To: pjsip list Subject: Re: [pjsip] FW: Problem in registering PJSIP with Asterisk server can u send your new pjsip config file? On Fri, Apr 10, 2009 at 5:27 PM, Senthil <senthil@gotouchpoint.com> wrote: Dear Atik, Any updates on this issue, Thanks, - Senthil _____ From: pjsip-bounces@lists.pjsip.org [mailto:pjsip-bounces@lists.pjsip.org] On Behalf Of Senthil Sent: Thursday, April 09, 2009 9:45 PM To: 'atik'; pjsip@lists.pjsip.org Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server Hi Atik, Thanks for the suggestion, that worked, now I'm able to register to Asterisk server. But the problem is I'm not able to place a call to a X-lite phone which is connected to the same domain. I received the following error while trying to place call. Any suggestions? Pjsua-app.c call3 is disconnected reason=403 (forbidden) Again thanks for the help. Regards, - Senthil _____ From: atik [mailto:atik.khan@gmail.com] Sent: Thursday, April 09, 2009 8:51 PM To: senthil@gotouchpoint.com; pjsip list Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server try this in your username.cfg --id sip:senthil@192.168.100.102:5060 --registrar sip:192.168.100.102:5060 --realm * --username senthil --password 1234 On Thu, Apr 9, 2009 at 7:52 PM, senthil@gotouchpoint.com <senthil@gotouchpoint.com> wrote: Dear All, I've downloaded PJSIP 1.1 software and followed the installation to build the software. The linux kernel version is 2.6.18-8.el5. I've successfully built the software but I'm not able to register PJSIP with Asterisk Open Source PBX. Error under PJSIP side: --end msg-- 16:43:53.255 pjsua_acc.c SIP registration failed, status = 404 (Not found) Error under Asterisk side: [Apr 9 16:58:22] NOTICE[7426]: Chan_sip_c:14491 handle_request_register:Registration from'<SIP:192.168.100.14>' failed for '192.168.100.14' - No matchine peer found Necessary configuration files attached. Any valuable suggestion is greatly appreciated. Thanks & Regards, - Senthil -------------------------------------------------------------------- mail2web - Check your email from the web at http://link.mail2web.com/mail2web _______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip@lists.pjsip.org http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org _______________________________________________ Visit our blog: http://blog.pjsip.org pjsip mailing list pjsip@lists.pjsip.org http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org
A
atik
Fri, Apr 10, 2009 10:01 AM

--id sip:senthil@192.168.100.102:5060
--registrar sip:192.168.100.102:5060

try this

On Fri, Apr 10, 2009 at 5:47 PM, Senthil senthil@gotouchpoint.com wrote:

Dear Atik,

Please find the attachment.

One more question. For example I want to call from PJSIP to a VOIP Phone
(i.e a phone number is configured (15201 like that) not identified by IP
address), in such situation how should I place a call.

Thanks for your help,

Regards,

-Senthil

From: pjsip-bounces@lists.pjsip.org [mailto:
pjsip-bounces@lists.pjsip.org] *On Behalf Of *atik
Sent: Friday, April 10, 2009 3:09 PM
To: pjsip list
Subject: Re: [pjsip] FW: Problem in registering PJSIP with Asterisk
server

can u send your new pjsip config file?

On Fri, Apr 10, 2009 at 5:27 PM, Senthil senthil@gotouchpoint.com wrote:

Dear Atik,

Any updates on this issue,

Thanks,

  • Senthil

From: pjsip-bounces@lists.pjsip.org [mailto:
pjsip-bounces@lists.pjsip.org] *On Behalf Of *Senthil
Sent: Thursday, April 09, 2009 9:45 PM
To: 'atik'; pjsip@lists.pjsip.org

Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server

Hi Atik,

Thanks for the suggestion, that worked, now I’m able to register to
Asterisk server. But the problem is I’m not able to place a call to a X-lite
phone which is connected to the same domain. I received the following error
while trying to place call. Any suggestions?

Pjsua-app.c call3 is disconnected reason=403 (forbidden)

Again thanks for the help.

Regards,

  • Senthil

From: atik [mailto:atik.khan@gmail.com]
Sent: Thursday, April 09, 2009 8:51 PM
To: senthil@gotouchpoint.com; pjsip list
Subject: Re: [pjsip] Problem in registering PJSIP with Asterisk server

try this in your username.cfg

--id sip:senthil@192.168.100.102:5060
--registrar sip:192.168.100.102:5060
--realm *
--username senthil
--password 1234

On Thu, Apr 9, 2009 at 7:52 PM, senthil@gotouchpoint.com <
senthil@gotouchpoint.com> wrote:

Dear All,

I've downloaded PJSIP 1.1 software and followed the installation to build
the software. The linux kernel version is 2.6.18-8.el5. I've successfully
built the software but I'm not able to register PJSIP with Asterisk Open
Source PBX.

Error under PJSIP side:

--end msg--

16:43:53.255 pjsua_acc.c SIP registration failed, status = 404 (Not found)

Error under Asterisk side:

[Apr 9 16:58:22] NOTICE[7426]: Chan_sip_c:14491
handle_request_register:Registration from'SIP:192.168.100.14' failed for
'192.168.100.14' - No matchine peer found

Necessary configuration files attached.

Any valuable suggestion is greatly appreciated.

Thanks & Regards,

  • Senthil

mail2web - Check your email from the web at
http://link.mail2web.com/mail2web


Visit our blog: http://blog.pjsip.org

pjsip mailing list
pjsip@lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org


Visit our blog: http://blog.pjsip.org

pjsip mailing list
pjsip@lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org


Visit our blog: http://blog.pjsip.org

pjsip mailing list
pjsip@lists.pjsip.org
http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org

--id sip:senthil@192.168.100.102:5060 --registrar sip:192.168.100.102:5060 try this On Fri, Apr 10, 2009 at 5:47 PM, Senthil <senthil@gotouchpoint.com> wrote: > Dear Atik, > > > > Please find the attachment. > > > > One more question. For example I want to call from PJSIP to a VOIP Phone > (i.e a phone number is configured (15201 like that) not identified by IP > address), in such situation how should I place a call. > > > > Thanks for your help, > > > > Regards, > > -Senthil > ------------------------------ > > *From:* pjsip-bounces@lists.pjsip.org [mailto: > pjsip-bounces@lists.pjsip.org] *On Behalf Of *atik > *Sent:* Friday, April 10, 2009 3:09 PM > *To:* pjsip list > *Subject:* Re: [pjsip] FW: Problem in registering PJSIP with Asterisk > server > > > > can u send your new pjsip config file? > > On Fri, Apr 10, 2009 at 5:27 PM, Senthil <senthil@gotouchpoint.com> wrote: > > Dear Atik, > > > > Any updates on this issue, > > > > Thanks, > > - Senthil > > > ------------------------------ > > *From:* pjsip-bounces@lists.pjsip.org [mailto: > pjsip-bounces@lists.pjsip.org] *On Behalf Of *Senthil > *Sent:* Thursday, April 09, 2009 9:45 PM > *To:* 'atik'; pjsip@lists.pjsip.org > > > *Subject:* Re: [pjsip] Problem in registering PJSIP with Asterisk server > > > > Hi Atik, > > > > Thanks for the suggestion, that worked, now I’m able to register to > Asterisk server. But the problem is I’m not able to place a call to a X-lite > phone which is connected to the same domain. I received the following error > while trying to place call. Any suggestions? > > > > Pjsua-app.c call3 is disconnected reason=403 (forbidden) > > > > Again thanks for the help. > > > > Regards, > > - Senthil > > > ------------------------------ > > *From:* atik [mailto:atik.khan@gmail.com] > *Sent:* Thursday, April 09, 2009 8:51 PM > *To:* senthil@gotouchpoint.com; pjsip list > *Subject:* Re: [pjsip] Problem in registering PJSIP with Asterisk server > > > > try this in your username.cfg > > --id sip:senthil@192.168.100.102:5060 > --registrar sip:192.168.100.102:5060 > --realm * > --username senthil > --password 1234 > > On Thu, Apr 9, 2009 at 7:52 PM, senthil@gotouchpoint.com < > senthil@gotouchpoint.com> wrote: > > Dear All, > > I've downloaded PJSIP 1.1 software and followed the installation to build > the software. The linux kernel version is 2.6.18-8.el5. I've successfully > built the software but I'm not able to register PJSIP with Asterisk Open > Source PBX. > > Error under PJSIP side: > > --end msg-- > > 16:43:53.255 pjsua_acc.c SIP registration failed, status = 404 (Not found) > > Error under Asterisk side: > > [Apr 9 16:58:22] NOTICE[7426]: Chan_sip_c:14491 > handle_request_register:Registration from'<SIP:192.168.100.14>' failed for > '192.168.100.14' - No matchine peer found > > Necessary configuration files attached. > > Any valuable suggestion is greatly appreciated. > > Thanks & Regards, > - Senthil > > > > -------------------------------------------------------------------- > mail2web - Check your email from the web at > http://link.mail2web.com/mail2web > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip@lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip@lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > > > > _______________________________________________ > Visit our blog: http://blog.pjsip.org > > pjsip mailing list > pjsip@lists.pjsip.org > http://lists.pjsip.org/mailman/listinfo/pjsip_lists.pjsip.org > >