Chuck, I just have found the 5200A manual & addendum here: http://us.fluke.com/usen/support/manuals/default.htm?prodcategory=OBS The others I mentioned are the power amps only. Fluke still scans on, so look for other manuals later. Frank

Hi Frank, Thanks! And they did a really good job with the scanning too. They are using a nice auto feeding scanner that seems to be very well setup. Their searching tools could use some improvement, though. I searched for 5200, 5200A, 341, 341A, 343, 343A, 8060, 8060A, and it didn't find any of them. And I scanned through the lists they had for the various instrument types without success. Apparently you have found a better area to look. -Chuck Harris Dr. Frank Stellmach wrote: > Chuck, > > I just have found the 5200A manual & addendum here: > > http://us.fluke.com/usen/support/manuals/default.htm?prodcategory=OBS > > The others I mentioned are the power amps only. > > Fluke still scans on, so look for other manuals later. > > Frank

Re..the Fluke manual downloads - - try the Australian Fluke website - - they have the best selection of all. Roy ----- Original Message ----- From: "Chuck Harris" <cfharris@erols.com> To: "Discussion of precise time and frequency measurement" <time-nuts@febo.com> Sent: Sunday, March 22, 2009 9:35 PM Subject: Re: [time-nuts] OT: Basics of voltage calibration? Fluke manual5200A > Hi Frank, > > Thanks! And they did a really good job with the scanning too. They > are using a nice auto feeding scanner that seems to be very well setup. > > Their searching tools could use some improvement, though. I searched > for 5200, 5200A, 341, 341A, 343, 343A, 8060, 8060A, and it didn't find > any of them. And I scanned through the lists they had for the various > instrument types without success. Apparently you have found a better > area to look. > > -Chuck Harris > > Dr. Frank Stellmach wrote: >> Chuck, >> >> I just have found the 5200A manual & addendum here: >> >> http://us.fluke.com/usen/support/manuals/default.htm?prodcategory=OBS >> >> The others I mentioned are the power amps only. >> >> Fluke still scans on, so look for other manuals later. >> >> Frank > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >