Sebastian,
Sorry for the delayed answer - I check this mailing list only occasionally.
It's better to use our ClockTamer list for questions:
https://groups.google.com/group/clocktamer?pli=1
With USRP N210 you should connect ClockTamer to 10MHz input and set
ClockTamer output frequency to 10MHz. Then you should check your clock
offset (e.g. using 'kal') and tune ClockTamer output few Hz up or down until
you get reasonable offset.
Note, that we have never done this before and tell just from general
experience. We used ClockTamer with USRP1 mostly. Please let us know about
your results.
On Thu, Jul 7, 2011 at 18:21, "Sebastian Döring" doering.seb@web.de wrote:
--
Regards,
Alexander Chemeris.
Sebastian,
Sorry for the delayed answer - I check this mailing list only occasionally.
It's better to use our ClockTamer list for questions:
https://groups.google.com/group/clocktamer?pli=1
With USRP N210 you should connect ClockTamer to 10MHz input and set
ClockTamer output frequency to 10MHz. Then you should check your clock
offset (e.g. using 'kal') and tune ClockTamer output few Hz up or down until
you get reasonable offset.
Note, that we have never done this before and tell just from general
experience. We used ClockTamer with USRP1 mostly. Please let us know about
your results.
On Thu, Jul 7, 2011 at 18:21, "Sebastian Döring" <doering.seb@web.de> wrote:
> Hello list,
>
> does anybody know where I could get some manual or setup instruction for
> connecting ClockTamer to my USRP N210?
> The Hardware package arrived without any hint to that...
>
> Thanks in advance.
>
> Sebastian
>
> Schon gehört? WEB.DE hat einen genialen Phishing-Filter in die
> Toolbar eingebaut! *http://produkte.web.de/go/toolbar*<http://produkte.web.de/go/toolbar>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
--
Regards,
Alexander Chemeris.
Schon gehört? WEB.DE hat einen genialen Phishing-Filter in die
