time-nuts@lists.febo.com

Discussion of precise time and frequency measurement

View all threads

Austron 2201 Firmware past Y2K

TK
Tom Knox
Fri, May 25, 2012 5:32 PM

Hi;
I have finally found a 70MHz IF GPS ant only to find the Austron 2201 is not Y2K complaint. Has anyone found a solution for this problem?  I have looked at past threads and come up short, but thought I saw this problem addressed in the past.
Thanks;
Thomas Knox

Hi; I have finally found a 70MHz IF GPS ant only to find the Austron 2201 is not Y2K complaint. Has anyone found a solution for this problem? I have looked at past threads and come up short, but thought I saw this problem addressed in the past. Thanks; Thomas Knox
PS
paul swed
Fri, May 25, 2012 7:54 PM

Yepper
Simply set the date back by rollover time
there is a gps date converter online that I use to figure it out
http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16

Regards
Paul
WB8TSL

On Fri, May 25, 2012 at 1:32 PM, Tom Knox actast@hotmail.com wrote:

Hi;
I have finally found a 70MHz IF GPS ant only to find the Austron 2201 is
not Y2K complaint. Has anyone found a solution for this problem?  I have
looked at past threads and come up short, but thought I saw this problem
addressed in the past.
Thanks;
Thomas Knox


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Yepper Simply set the date back by rollover time there is a gps date converter online that I use to figure it out http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16 Regards Paul WB8TSL On Fri, May 25, 2012 at 1:32 PM, Tom Knox <actast@hotmail.com> wrote: > > Hi; > I have finally found a 70MHz IF GPS ant only to find the Austron 2201 is > not Y2K complaint. Has anyone found a solution for this problem? I have > looked at past threads and come up short, but thought I saw this problem > addressed in the past. > Thanks; > Thomas Knox > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >
TK
Tom Knox
Sat, May 26, 2012 12:59 AM

Hi Paul;
First, I received the Austron Antenna and it works.
So you are saying that I should setback 1024 weeks to July 16 1992 and the rec will recognize the almanac?. Now July 17th?
Thanks;
Thomas Knox

Ascent Concepts and Technology

4475 Whitney Place
Boulder Colorado 80305

1-303-554-0307

Date: Fri, 25 May 2012 15:54:57 -0400
From: paulswedb@gmail.com
To: time-nuts@febo.com
Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K

Yepper
Simply set the date back by rollover time
there is a gps date converter online that I use to figure it out
http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16

Regards
Paul
WB8TSL

On Fri, May 25, 2012 at 1:32 PM, Tom Knox actast@hotmail.com wrote:

Hi;
I have finally found a 70MHz IF GPS ant only to find the Austron 2201 is
not Y2K complaint. Has anyone found a solution for this problem?  I have
looked at past threads and come up short, but thought I saw this problem
addressed in the past.
Thanks;
Thomas Knox


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Hi Paul; First, I received the Austron Antenna and it works. So you are saying that I should setback 1024 weeks to July 16 1992 and the rec will recognize the almanac?. Now July 17th? Thanks; Thomas Knox Ascent Concepts and Technology 4475 Whitney Place Boulder Colorado 80305 1-303-554-0307 > Date: Fri, 25 May 2012 15:54:57 -0400 > From: paulswedb@gmail.com > To: time-nuts@febo.com > Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K > > Yepper > Simply set the date back by rollover time > there is a gps date converter online that I use to figure it out > http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16 > > Regards > Paul > WB8TSL > > > On Fri, May 25, 2012 at 1:32 PM, Tom Knox <actast@hotmail.com> wrote: > > > > > Hi; > > I have finally found a 70MHz IF GPS ant only to find the Austron 2201 is > > not Y2K complaint. Has anyone found a solution for this problem? I have > > looked at past threads and come up short, but thought I saw this problem > > addressed in the past. > > Thanks; > > Thomas Knox > > > > > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.
PS
paul swed
Sat, May 26, 2012 3:08 AM

yes you have to get the week right thats why the calculator is useful.
Also set the time. May fire the 2201 up tomorrow and can email you the week

On Fri, May 25, 2012 at 8:59 PM, Tom Knox actast@hotmail.com wrote:

Hi Paul;
First, I received the Austron Antenna and it works.
So you are saying that I should setback 1024 weeks to July 16 1992 and the
rec will recognize the almanac?. Now July 17th?
Thanks;
Thomas Knox

Ascent Concepts and Technology

4475 Whitney Place
Boulder Colorado 80305

1-303-554-0307

Date: Fri, 25 May 2012 15:54:57 -0400
From: paulswedb@gmail.com
To: time-nuts@febo.com
Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K

Yepper
Simply set the date back by rollover time
there is a gps date converter online that I use to figure it out
http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16

Regards
Paul
WB8TSL

On Fri, May 25, 2012 at 1:32 PM, Tom Knox actast@hotmail.com wrote:

Hi;
I have finally found a 70MHz IF GPS ant only to find the Austron 2201

is

not Y2K complaint. Has anyone found a solution for this problem?  I

have

looked at past threads and come up short, but thought I saw this

problem

addressed in the past.
Thanks;
Thomas Knox


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to

and follow the instructions there.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

yes you have to get the week right thats why the calculator is useful. Also set the time. May fire the 2201 up tomorrow and can email you the week On Fri, May 25, 2012 at 8:59 PM, Tom Knox <actast@hotmail.com> wrote: > > Hi Paul; > First, I received the Austron Antenna and it works. > So you are saying that I should setback 1024 weeks to July 16 1992 and the > rec will recognize the almanac?. Now July 17th? > Thanks; > Thomas Knox > > Ascent Concepts and Technology > > 4475 Whitney Place > Boulder Colorado 80305 > > 1-303-554-0307 > > > Date: Fri, 25 May 2012 15:54:57 -0400 > > From: paulswedb@gmail.com > > To: time-nuts@febo.com > > Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K > > > > Yepper > > Simply set the date back by rollover time > > there is a gps date converter online that I use to figure it out > > http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16 > > > > Regards > > Paul > > WB8TSL > > > > > > On Fri, May 25, 2012 at 1:32 PM, Tom Knox <actast@hotmail.com> wrote: > > > > > > > > Hi; > > > I have finally found a 70MHz IF GPS ant only to find the Austron 2201 > is > > > not Y2K complaint. Has anyone found a solution for this problem? I > have > > > looked at past threads and come up short, but thought I saw this > problem > > > addressed in the past. > > > Thanks; > > > Thomas Knox > > > > > > > > > > > > _______________________________________________ > > > time-nuts mailing list -- time-nuts@febo.com > > > To unsubscribe, go to > > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > > and follow the instructions there. > > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. >
PS
paul swed
Sat, May 26, 2012 3:09 AM

Also make sure your batteries are not dead on the CPUs as I recall mine was
replaced it.

On Fri, May 25, 2012 at 11:08 PM, paul swed paulswedb@gmail.com wrote:

yes you have to get the week right thats why the calculator is useful.
Also set the time. May fire the 2201 up tomorrow and can email you the week

On Fri, May 25, 2012 at 8:59 PM, Tom Knox actast@hotmail.com wrote:

Hi Paul;
First, I received the Austron Antenna and it works.
So you are saying that I should setback 1024 weeks to July 16 1992 and
the rec will recognize the almanac?. Now July 17th?
Thanks;
Thomas Knox

Ascent Concepts and Technology

4475 Whitney Place
Boulder Colorado 80305

1-303-554-0307

Date: Fri, 25 May 2012 15:54:57 -0400
From: paulswedb@gmail.com
To: time-nuts@febo.com
Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K

Yepper
Simply set the date back by rollover time
there is a gps date converter online that I use to figure it out
http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16

Regards
Paul
WB8TSL

On Fri, May 25, 2012 at 1:32 PM, Tom Knox actast@hotmail.com wrote:

Hi;
I have finally found a 70MHz IF GPS ant only to find the Austron 2201

is

not Y2K complaint. Has anyone found a solution for this problem?  I

have

looked at past threads and come up short, but thought I saw this

problem

addressed in the past.
Thanks;
Thomas Knox


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to

and follow the instructions there.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Also make sure your batteries are not dead on the CPUs as I recall mine was replaced it. On Fri, May 25, 2012 at 11:08 PM, paul swed <paulswedb@gmail.com> wrote: > yes you have to get the week right thats why the calculator is useful. > Also set the time. May fire the 2201 up tomorrow and can email you the week > > > On Fri, May 25, 2012 at 8:59 PM, Tom Knox <actast@hotmail.com> wrote: > >> >> Hi Paul; >> First, I received the Austron Antenna and it works. >> So you are saying that I should setback 1024 weeks to July 16 1992 and >> the rec will recognize the almanac?. Now July 17th? >> Thanks; >> Thomas Knox >> >> Ascent Concepts and Technology >> >> 4475 Whitney Place >> Boulder Colorado 80305 >> >> 1-303-554-0307 >> >> > Date: Fri, 25 May 2012 15:54:57 -0400 >> > From: paulswedb@gmail.com >> > To: time-nuts@febo.com >> > Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K >> > >> > Yepper >> > Simply set the date back by rollover time >> > there is a gps date converter online that I use to figure it out >> > http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16 >> > >> > Regards >> > Paul >> > WB8TSL >> > >> > >> > On Fri, May 25, 2012 at 1:32 PM, Tom Knox <actast@hotmail.com> wrote: >> > >> > > >> > > Hi; >> > > I have finally found a 70MHz IF GPS ant only to find the Austron 2201 >> is >> > > not Y2K complaint. Has anyone found a solution for this problem? I >> have >> > > looked at past threads and come up short, but thought I saw this >> problem >> > > addressed in the past. >> > > Thanks; >> > > Thomas Knox >> > > >> > > >> > > >> > > _______________________________________________ >> > > time-nuts mailing list -- time-nuts@febo.com >> > > To unsubscribe, go to >> > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> > > and follow the instructions there. >> > > >> > _______________________________________________ >> > time-nuts mailing list -- time-nuts@febo.com >> > To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> > and follow the instructions there. >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > >
MD
Magnus Danielson
Sat, May 26, 2012 7:44 AM

On 05/26/2012 05:09 AM, paul swed wrote:

Also make sure your batteries are not dead on the CPUs as I recall mine was
replaced it.

Maybe it's time to backup the EPROMs.

Also, it should not be too hard to extend the life-time by slight
modification of the software, and there is still people that know the
68010 good enough for it.

Cheers,
Magnus

On Fri, May 25, 2012 at 11:08 PM, paul swedpaulswedb@gmail.com  wrote:

yes you have to get the week right thats why the calculator is useful.
Also set the time. May fire the 2201 up tomorrow and can email you the week

On Fri, May 25, 2012 at 8:59 PM, Tom Knoxactast@hotmail.com  wrote:

Hi Paul;
First, I received the Austron Antenna and it works.
So you are saying that I should setback 1024 weeks to July 16 1992 and
the rec will recognize the almanac?. Now July 17th?
Thanks;
Thomas Knox

Ascent Concepts and Technology

4475 Whitney Place
Boulder Colorado 80305

1-303-554-0307

Date: Fri, 25 May 2012 15:54:57 -0400
From: paulswedb@gmail.com
To: time-nuts@febo.com
Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K

Yepper
Simply set the date back by rollover time
there is a gps date converter online that I use to figure it out
http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16

Regards
Paul
WB8TSL

On Fri, May 25, 2012 at 1:32 PM, Tom Knoxactast@hotmail.com  wrote:

Hi;
I have finally found a 70MHz IF GPS ant only to find the Austron 2201

is

not Y2K complaint. Has anyone found a solution for this problem?  I

have

looked at past threads and come up short, but thought I saw this

problem

addressed in the past.
Thanks;
Thomas Knox


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to

and follow the instructions there.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

On 05/26/2012 05:09 AM, paul swed wrote: > Also make sure your batteries are not dead on the CPUs as I recall mine was > replaced it. Maybe it's time to backup the EPROMs. Also, it should not be too hard to extend the life-time by slight modification of the software, and there is still people that know the 68010 good enough for it. Cheers, Magnus > > On Fri, May 25, 2012 at 11:08 PM, paul swed<paulswedb@gmail.com> wrote: > >> yes you have to get the week right thats why the calculator is useful. >> Also set the time. May fire the 2201 up tomorrow and can email you the week >> >> >> On Fri, May 25, 2012 at 8:59 PM, Tom Knox<actast@hotmail.com> wrote: >> >>> >>> Hi Paul; >>> First, I received the Austron Antenna and it works. >>> So you are saying that I should setback 1024 weeks to July 16 1992 and >>> the rec will recognize the almanac?. Now July 17th? >>> Thanks; >>> Thomas Knox >>> >>> Ascent Concepts and Technology >>> >>> 4475 Whitney Place >>> Boulder Colorado 80305 >>> >>> 1-303-554-0307 >>> >>>> Date: Fri, 25 May 2012 15:54:57 -0400 >>>> From: paulswedb@gmail.com >>>> To: time-nuts@febo.com >>>> Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K >>>> >>>> Yepper >>>> Simply set the date back by rollover time >>>> there is a gps date converter online that I use to figure it out >>>> http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16 >>>> >>>> Regards >>>> Paul >>>> WB8TSL >>>> >>>> >>>> On Fri, May 25, 2012 at 1:32 PM, Tom Knox<actast@hotmail.com> wrote: >>>> >>>>> >>>>> Hi; >>>>> I have finally found a 70MHz IF GPS ant only to find the Austron 2201 >>> is >>>>> not Y2K complaint. Has anyone found a solution for this problem? I >>> have >>>>> looked at past threads and come up short, but thought I saw this >>> problem >>>>> addressed in the past. >>>>> Thanks; >>>>> Thomas Knox >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> time-nuts mailing list -- time-nuts@febo.com >>>>> To unsubscribe, go to >>>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>>>> and follow the instructions there. >>>>> >>>> _______________________________________________ >>>> time-nuts mailing list -- time-nuts@febo.com >>>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>>> and follow the instructions there. >>> >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >>> >> >> > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.
PS
paul swed
Sat, May 26, 2012 3:31 PM

Hello to the group did that quite a while ago they are on the KO4BB website.
Memory is a terrible thing to forget
Regards
Paul

On Sat, May 26, 2012 at 3:44 AM, Magnus Danielson <
magnus@rubidium.dyndns.org> wrote:

On 05/26/2012 05:09 AM, paul swed wrote:

Also make sure your batteries are not dead on the CPUs as I recall mine
was
replaced it.

Maybe it's time to backup the EPROMs.

Also, it should not be too hard to extend the life-time by slight
modification of the software, and there is still people that know the 68010
good enough for it.

Cheers,
Magnus

On Fri, May 25, 2012 at 11:08 PM, paul swedpaulswedb@gmail.com  wrote:

yes you have to get the week right thats why the calculator is useful.

Also set the time. May fire the 2201 up tomorrow and can email you the
week

On Fri, May 25, 2012 at 8:59 PM, Tom Knoxactast@hotmail.com  wrote:

Hi Paul;
First, I received the Austron Antenna and it works.
So you are saying that I should setback 1024 weeks to July 16 1992 and
the rec will recognize the almanac?. Now July 17th?
Thanks;
Thomas Knox

Ascent Concepts and Technology

4475 Whitney Place
Boulder Colorado 80305

1-303-554-0307

Date: Fri, 25 May 2012 15:54:57 -0400

From: paulswedb@gmail.com
To: time-nuts@febo.com
Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K

Yepper
Simply set the date back by rollover time
there is a gps date converter online that I use to figure it out
http://csrc.ucsd.edu/scripts/**convertDate.cgi?time=1992+07+**16http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16

Regards
Paul
WB8TSL

On Fri, May 25, 2012 at 1:32 PM, Tom Knoxactast@hotmail.com  wrote:

Hi;
I have finally found a 70MHz IF GPS ant only to find the Austron 2201

is

not Y2K complaint. Has anyone found a solution for this problem?  I

have

looked at past threads and come up short, but thought I saw this

problem

addressed in the past.

Thanks;
Thomas Knox

_____________**
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/**mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_____________**

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to

and follow the instructions there.

_____________**
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/**mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_____________**

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/**
mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_____________**
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/**
mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Hello to the group did that quite a while ago they are on the KO4BB website. Memory is a terrible thing to forget Regards Paul On Sat, May 26, 2012 at 3:44 AM, Magnus Danielson < magnus@rubidium.dyndns.org> wrote: > On 05/26/2012 05:09 AM, paul swed wrote: > >> Also make sure your batteries are not dead on the CPUs as I recall mine >> was >> replaced it. >> > > Maybe it's time to backup the EPROMs. > > Also, it should not be too hard to extend the life-time by slight > modification of the software, and there is still people that know the 68010 > good enough for it. > > Cheers, > Magnus > > > >> On Fri, May 25, 2012 at 11:08 PM, paul swed<paulswedb@gmail.com> wrote: >> >> yes you have to get the week right thats why the calculator is useful. >>> Also set the time. May fire the 2201 up tomorrow and can email you the >>> week >>> >>> >>> On Fri, May 25, 2012 at 8:59 PM, Tom Knox<actast@hotmail.com> wrote: >>> >>> >>>> Hi Paul; >>>> First, I received the Austron Antenna and it works. >>>> So you are saying that I should setback 1024 weeks to July 16 1992 and >>>> the rec will recognize the almanac?. Now July 17th? >>>> Thanks; >>>> Thomas Knox >>>> >>>> Ascent Concepts and Technology >>>> >>>> 4475 Whitney Place >>>> Boulder Colorado 80305 >>>> >>>> 1-303-554-0307 >>>> >>>> Date: Fri, 25 May 2012 15:54:57 -0400 >>>>> From: paulswedb@gmail.com >>>>> To: time-nuts@febo.com >>>>> Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K >>>>> >>>>> Yepper >>>>> Simply set the date back by rollover time >>>>> there is a gps date converter online that I use to figure it out >>>>> http://csrc.ucsd.edu/scripts/**convertDate.cgi?time=1992+07+**16<http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16> >>>>> >>>>> Regards >>>>> Paul >>>>> WB8TSL >>>>> >>>>> >>>>> On Fri, May 25, 2012 at 1:32 PM, Tom Knox<actast@hotmail.com> wrote: >>>>> >>>>> >>>>>> Hi; >>>>>> I have finally found a 70MHz IF GPS ant only to find the Austron 2201 >>>>>> >>>>> is >>>> >>>>> not Y2K complaint. Has anyone found a solution for this problem? I >>>>>> >>>>> have >>>> >>>>> looked at past threads and come up short, but thought I saw this >>>>>> >>>>> problem >>>> >>>>> addressed in the past. >>>>>> Thanks; >>>>>> Thomas Knox >>>>>> >>>>>> >>>>>> >>>>>> ______________________________**_________________ >>>>>> time-nuts mailing list -- time-nuts@febo.com >>>>>> To unsubscribe, go to >>>>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>>>>> and follow the instructions there. >>>>>> >>>>>> ______________________________**_________________ >>>>> time-nuts mailing list -- time-nuts@febo.com >>>>> To unsubscribe, go to >>>>> >>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>>> >>>>> and follow the instructions there. >>>>> >>>> >>>> ______________________________**_________________ >>>> time-nuts mailing list -- time-nuts@febo.com >>>> To unsubscribe, go to >>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>>> and follow the instructions there. >>>> >>>> >>> >>> ______________________________**_________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/** >> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >> and follow the instructions there. >> > > > ______________________________**_________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/** > mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> > and follow the instructions there. >
PS
paul swed
Sat, May 26, 2012 3:39 PM

Todays austron 2201 date is oct 10th 1992
Save you some trouble
Regards
Paul
WB8TSL

On Sat, May 26, 2012 at 11:31 AM, paul swed paulswedb@gmail.com wrote:

Hello to the group did that quite a while ago they are on the KO4BB
website.
Memory is a terrible thing to forget
Regards
Paul

On Sat, May 26, 2012 at 3:44 AM, Magnus Danielson <
magnus@rubidium.dyndns.org> wrote:

On 05/26/2012 05:09 AM, paul swed wrote:

Also make sure your batteries are not dead on the CPUs as I recall mine
was
replaced it.

Maybe it's time to backup the EPROMs.

Also, it should not be too hard to extend the life-time by slight
modification of the software, and there is still people that know the 68010
good enough for it.

Cheers,
Magnus

On Fri, May 25, 2012 at 11:08 PM, paul swedpaulswedb@gmail.com  wrote:

yes you have to get the week right thats why the calculator is useful.

Also set the time. May fire the 2201 up tomorrow and can email you the
week

On Fri, May 25, 2012 at 8:59 PM, Tom Knoxactast@hotmail.com  wrote:

Hi Paul;
First, I received the Austron Antenna and it works.
So you are saying that I should setback 1024 weeks to July 16 1992 and
the rec will recognize the almanac?. Now July 17th?
Thanks;
Thomas Knox

Ascent Concepts and Technology

4475 Whitney Place
Boulder Colorado 80305

1-303-554-0307

Date: Fri, 25 May 2012 15:54:57 -0400

From: paulswedb@gmail.com
To: time-nuts@febo.com
Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K

Yepper
Simply set the date back by rollover time
there is a gps date converter online that I use to figure it out
http://csrc.ucsd.edu/scripts/**convertDate.cgi?time=1992+07+**16http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16

Regards
Paul
WB8TSL

On Fri, May 25, 2012 at 1:32 PM, Tom Knoxactast@hotmail.com  wrote:

Hi;
I have finally found a 70MHz IF GPS ant only to find the Austron 2201

is

not Y2K complaint. Has anyone found a solution for this problem?  I

have

looked at past threads and come up short, but thought I saw this

problem

addressed in the past.

Thanks;
Thomas Knox

_____________**
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/**mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_____________**

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to

and follow the instructions there.

_____________**
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/**mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_____________**

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/**
mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_____________**
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/**
mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Todays austron 2201 date is oct 10th 1992 Save you some trouble Regards Paul WB8TSL On Sat, May 26, 2012 at 11:31 AM, paul swed <paulswedb@gmail.com> wrote: > Hello to the group did that quite a while ago they are on the KO4BB > website. > Memory is a terrible thing to forget > Regards > Paul > > > On Sat, May 26, 2012 at 3:44 AM, Magnus Danielson < > magnus@rubidium.dyndns.org> wrote: > >> On 05/26/2012 05:09 AM, paul swed wrote: >> >>> Also make sure your batteries are not dead on the CPUs as I recall mine >>> was >>> replaced it. >>> >> >> Maybe it's time to backup the EPROMs. >> >> Also, it should not be too hard to extend the life-time by slight >> modification of the software, and there is still people that know the 68010 >> good enough for it. >> >> Cheers, >> Magnus >> >> >> >>> On Fri, May 25, 2012 at 11:08 PM, paul swed<paulswedb@gmail.com> wrote: >>> >>> yes you have to get the week right thats why the calculator is useful. >>>> Also set the time. May fire the 2201 up tomorrow and can email you the >>>> week >>>> >>>> >>>> On Fri, May 25, 2012 at 8:59 PM, Tom Knox<actast@hotmail.com> wrote: >>>> >>>> >>>>> Hi Paul; >>>>> First, I received the Austron Antenna and it works. >>>>> So you are saying that I should setback 1024 weeks to July 16 1992 and >>>>> the rec will recognize the almanac?. Now July 17th? >>>>> Thanks; >>>>> Thomas Knox >>>>> >>>>> Ascent Concepts and Technology >>>>> >>>>> 4475 Whitney Place >>>>> Boulder Colorado 80305 >>>>> >>>>> 1-303-554-0307 >>>>> >>>>> Date: Fri, 25 May 2012 15:54:57 -0400 >>>>>> From: paulswedb@gmail.com >>>>>> To: time-nuts@febo.com >>>>>> Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K >>>>>> >>>>>> Yepper >>>>>> Simply set the date back by rollover time >>>>>> there is a gps date converter online that I use to figure it out >>>>>> http://csrc.ucsd.edu/scripts/**convertDate.cgi?time=1992+07+**16<http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16> >>>>>> >>>>>> Regards >>>>>> Paul >>>>>> WB8TSL >>>>>> >>>>>> >>>>>> On Fri, May 25, 2012 at 1:32 PM, Tom Knox<actast@hotmail.com> wrote: >>>>>> >>>>>> >>>>>>> Hi; >>>>>>> I have finally found a 70MHz IF GPS ant only to find the Austron 2201 >>>>>>> >>>>>> is >>>>> >>>>>> not Y2K complaint. Has anyone found a solution for this problem? I >>>>>>> >>>>>> have >>>>> >>>>>> looked at past threads and come up short, but thought I saw this >>>>>>> >>>>>> problem >>>>> >>>>>> addressed in the past. >>>>>>> Thanks; >>>>>>> Thomas Knox >>>>>>> >>>>>>> >>>>>>> >>>>>>> ______________________________**_________________ >>>>>>> time-nuts mailing list -- time-nuts@febo.com >>>>>>> To unsubscribe, go to >>>>>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>>>>>> and follow the instructions there. >>>>>>> >>>>>>> ______________________________**_________________ >>>>>> time-nuts mailing list -- time-nuts@febo.com >>>>>> To unsubscribe, go to >>>>>> >>>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>>>> >>>>>> and follow the instructions there. >>>>>> >>>>> >>>>> ______________________________**_________________ >>>>> time-nuts mailing list -- time-nuts@febo.com >>>>> To unsubscribe, go to >>>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>>>> and follow the instructions there. >>>>> >>>>> >>>> >>>> ______________________________**_________________ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to https://www.febo.com/cgi-bin/** >>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>> and follow the instructions there. >>> >> >> >> ______________________________**_________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/** >> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >> and follow the instructions there. >> > >
PS
paul swed
Sat, May 26, 2012 4:45 PM

As they say the 2201 is locked and phasing its internal oscillator.
Its really quite a piece of equipment especially considering its vintage.
Regards
Paul.

On Sat, May 26, 2012 at 11:39 AM, paul swed paulswedb@gmail.com wrote:

Todays austron 2201 date is oct 10th 1992
Save you some trouble
Regards
Paul
WB8TSL

On Sat, May 26, 2012 at 11:31 AM, paul swed paulswedb@gmail.com wrote:

Hello to the group did that quite a while ago they are on the KO4BB
website.
Memory is a terrible thing to forget
Regards
Paul

On Sat, May 26, 2012 at 3:44 AM, Magnus Danielson <
magnus@rubidium.dyndns.org> wrote:

On 05/26/2012 05:09 AM, paul swed wrote:

Also make sure your batteries are not dead on the CPUs as I recall mine
was
replaced it.

Maybe it's time to backup the EPROMs.

Also, it should not be too hard to extend the life-time by slight
modification of the software, and there is still people that know the 68010
good enough for it.

Cheers,
Magnus

On Fri, May 25, 2012 at 11:08 PM, paul swedpaulswedb@gmail.com
wrote:

yes you have to get the week right thats why the calculator is useful.

Also set the time. May fire the 2201 up tomorrow and can email you the
week

On Fri, May 25, 2012 at 8:59 PM, Tom Knoxactast@hotmail.com  wrote:

Hi Paul;
First, I received the Austron Antenna and it works.
So you are saying that I should setback 1024 weeks to July 16 1992 and
the rec will recognize the almanac?. Now July 17th?
Thanks;
Thomas Knox

Ascent Concepts and Technology

4475 Whitney Place
Boulder Colorado 80305

1-303-554-0307

Date: Fri, 25 May 2012 15:54:57 -0400

From: paulswedb@gmail.com
To: time-nuts@febo.com
Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K

Yepper
Simply set the date back by rollover time
there is a gps date converter online that I use to figure it out
http://csrc.ucsd.edu/scripts/**convertDate.cgi?time=1992+07+**16http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16

Regards
Paul
WB8TSL

On Fri, May 25, 2012 at 1:32 PM, Tom Knoxactast@hotmail.com
wrote:

Hi;
I have finally found a 70MHz IF GPS ant only to find the Austron
2201

is

not Y2K complaint. Has anyone found a solution for this problem?  I

have

looked at past threads and come up short, but thought I saw this

problem

addressed in the past.

Thanks;
Thomas Knox

_____________**
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/**mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_____________**

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to

and follow the instructions there.

_____________**
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/**mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_____________**

time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/**
mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_____________**
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/**
mailman/listinfo/time-nutshttps://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

As they say the 2201 is locked and phasing its internal oscillator. Its really quite a piece of equipment especially considering its vintage. Regards Paul. On Sat, May 26, 2012 at 11:39 AM, paul swed <paulswedb@gmail.com> wrote: > Todays austron 2201 date is oct 10th 1992 > Save you some trouble > Regards > Paul > WB8TSL > > > On Sat, May 26, 2012 at 11:31 AM, paul swed <paulswedb@gmail.com> wrote: > >> Hello to the group did that quite a while ago they are on the KO4BB >> website. >> Memory is a terrible thing to forget >> Regards >> Paul >> >> >> On Sat, May 26, 2012 at 3:44 AM, Magnus Danielson < >> magnus@rubidium.dyndns.org> wrote: >> >>> On 05/26/2012 05:09 AM, paul swed wrote: >>> >>>> Also make sure your batteries are not dead on the CPUs as I recall mine >>>> was >>>> replaced it. >>>> >>> >>> Maybe it's time to backup the EPROMs. >>> >>> Also, it should not be too hard to extend the life-time by slight >>> modification of the software, and there is still people that know the 68010 >>> good enough for it. >>> >>> Cheers, >>> Magnus >>> >>> >>> >>>> On Fri, May 25, 2012 at 11:08 PM, paul swed<paulswedb@gmail.com> >>>> wrote: >>>> >>>> yes you have to get the week right thats why the calculator is useful. >>>>> Also set the time. May fire the 2201 up tomorrow and can email you the >>>>> week >>>>> >>>>> >>>>> On Fri, May 25, 2012 at 8:59 PM, Tom Knox<actast@hotmail.com> wrote: >>>>> >>>>> >>>>>> Hi Paul; >>>>>> First, I received the Austron Antenna and it works. >>>>>> So you are saying that I should setback 1024 weeks to July 16 1992 and >>>>>> the rec will recognize the almanac?. Now July 17th? >>>>>> Thanks; >>>>>> Thomas Knox >>>>>> >>>>>> Ascent Concepts and Technology >>>>>> >>>>>> 4475 Whitney Place >>>>>> Boulder Colorado 80305 >>>>>> >>>>>> 1-303-554-0307 >>>>>> >>>>>> Date: Fri, 25 May 2012 15:54:57 -0400 >>>>>>> From: paulswedb@gmail.com >>>>>>> To: time-nuts@febo.com >>>>>>> Subject: Re: [time-nuts] Austron 2201 Firmware past Y2K >>>>>>> >>>>>>> Yepper >>>>>>> Simply set the date back by rollover time >>>>>>> there is a gps date converter online that I use to figure it out >>>>>>> http://csrc.ucsd.edu/scripts/**convertDate.cgi?time=1992+07+**16<http://csrc.ucsd.edu/scripts/convertDate.cgi?time=1992+07+16> >>>>>>> >>>>>>> Regards >>>>>>> Paul >>>>>>> WB8TSL >>>>>>> >>>>>>> >>>>>>> On Fri, May 25, 2012 at 1:32 PM, Tom Knox<actast@hotmail.com> >>>>>>> wrote: >>>>>>> >>>>>>> >>>>>>>> Hi; >>>>>>>> I have finally found a 70MHz IF GPS ant only to find the Austron >>>>>>>> 2201 >>>>>>>> >>>>>>> is >>>>>> >>>>>>> not Y2K complaint. Has anyone found a solution for this problem? I >>>>>>>> >>>>>>> have >>>>>> >>>>>>> looked at past threads and come up short, but thought I saw this >>>>>>>> >>>>>>> problem >>>>>> >>>>>>> addressed in the past. >>>>>>>> Thanks; >>>>>>>> Thomas Knox >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> ______________________________**_________________ >>>>>>>> time-nuts mailing list -- time-nuts@febo.com >>>>>>>> To unsubscribe, go to >>>>>>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>>>>>>> and follow the instructions there. >>>>>>>> >>>>>>>> ______________________________**_________________ >>>>>>> time-nuts mailing list -- time-nuts@febo.com >>>>>>> To unsubscribe, go to >>>>>>> >>>>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>>>>> >>>>>>> and follow the instructions there. >>>>>>> >>>>>> >>>>>> ______________________________**_________________ >>>>>> time-nuts mailing list -- time-nuts@febo.com >>>>>> To unsubscribe, go to >>>>>> https://www.febo.com/cgi-bin/**mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>>>>> and follow the instructions there. >>>>>> >>>>>> >>>>> >>>>> ______________________________**_________________ >>>> time-nuts mailing list -- time-nuts@febo.com >>>> To unsubscribe, go to https://www.febo.com/cgi-bin/** >>>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>>> and follow the instructions there. >>>> >>> >>> >>> ______________________________**_________________ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to https://www.febo.com/cgi-bin/** >>> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> >>> and follow the instructions there. >>> >> >> >
MD
Magnus Danielson
Sat, May 26, 2012 5:12 PM

On 05/26/2012 05:31 PM, paul swed wrote:

Hello to the group did that quite a while ago they are on the KO4BB website.

Oh, great! Can't find it thought.

Memory is a terrible thing to forget

Indeed.

Cheers,
Magnus

On 05/26/2012 05:31 PM, paul swed wrote: > Hello to the group did that quite a while ago they are on the KO4BB website. Oh, great! Can't find it thought. > Memory is a terrible thing to forget Indeed. Cheers, Magnus