Hi We are following this wiki http://openbts.org/w/index.php/E3x0 in order to install OpenBTS along with all the other dependencies on Ettus USRP E310. After the installation, when OpenBTS and subscriber registry are run, network is detected but no mobile handset is able to register to the network. The command "tmsis" also prints an empty TMSI Table. Please inform if anything else needs to be done in addition to following the steps in the wiki. Regards, Amber, Sarosh & Naheed

On Tue, Mar 31, 2015 at 3:58 AM, Amber and Sarosh <amber_sarosh@hotmail.com> wrote: > We are following this wiki http://openbts.org/w/index.php/E3x0 in order to > install OpenBTS along with all the other dependencies on Ettus USRP E310. > After the installation, when OpenBTS and subscriber registry are run, > network is detected but no mobile handset is able to register to the > network. The command "tmsis" also prints an empty TMSI Table. Please inform > if anything else needs to be done in addition to following the steps in the > wiki. Can you check the OpenBTS log for any activity? What does your antenna and gain setup look like? -TT

Thanks for your response. We have followed the installation procedure as on the wiki but the log file is not created so it does not show OpenBTS logs at all. We are using VERT 400 antenna with this(that we had tested earlier with USRP N200 too). Please also inform if sqlite3 has to be installed in addition to the packages mentioned on the wiki. We have tried to install sqlite3, but we are unable to find a package that is compatible with the architecture. Regards, Amber, Sarosh & Naheed > Date: Tue, 31 Mar 2015 10:15:27 -0700 > Subject: Re: OpenBTS Subscriber Registration - E310 USRP > From: tom@tsou.cc > To: amber_sarosh@hotmail.com > CC: openbts-discuss@lists.sourceforge.net; usrp-users@lists.ettus.com; wajid@nrtc.com.pk; naheed.ijaz@nrtc.com.pk > > On Tue, Mar 31, 2015 at 3:58 AM, Amber and Sarosh > <amber_sarosh@hotmail.com> wrote: > > We are following this wiki http://openbts.org/w/index.php/E3x0 in order to > > install OpenBTS along with all the other dependencies on Ettus USRP E310. > > After the installation, when OpenBTS and subscriber registry are run, > > network is detected but no mobile handset is able to register to the > > network. The command "tmsis" also prints an empty TMSI Table. Please inform > > if anything else needs to be done in addition to following the steps in the > > wiki. > > Can you check the OpenBTS log for any activity? What does your antenna > and gain setup look like? > > -TT