Hi: I've received the components of the Z3810A system and have some 8x10 color glossy photographs with circles and arrows and a paragraph on the back of each one explainin' what each one is for. But need to find the connectors to make up the DC power cables. http://www.prc68.com/I/KS-24361.html Mail_Attachment -- Have Fun, Brooke Clarke http://www.PRC68.com http://www.end2partygovernment.com/2012Issues.html http://www.prc68.com/I/DietNutrition.html

Hi Hmmm …. dc power cables …. chop end off un-used serial cable… attach proper wires to power supply. (Yes, if you get the wires backwards things get a bit exciting … I have empirical evidence to support this claim). Since the running current is well below 1A on each connector, you don’t really need super heavy cables. Bob > On Nov 18, 2014, at 5:41 PM, Brooke Clarke <brooke@pacific.net> wrote: > > Hi: > > I've received the components of the Z3810A system and have some 8x10 color glossy photographs with circles and arrows and a paragraph on the back of each one explainin' what each one is for. But need to find the connectors to make up the DC power cables. > > http://www.prc68.com/I/KS-24361.html > > Mail_Attachment -- > Have Fun, > > Brooke Clarke > http://www.PRC68.com > http://www.end2partygovernment.com/2012Issues.html > http://www.prc68.com/I/DietNutrition.html > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there.

Nice write up, all of us on bench W enjoyed it. :-) 73, Kris, WT5V -----Original Message----- From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of Brooke Clarke Sent: Tuesday, November 18, 2014 4:42 PM To: Discussion of precise time and frequency measurement Subject: [time-nuts] Lucent KS-24361 Web Page Hi: I've received the components of the Z3810A system and have some 8x10 color glossy photographs with circles and arrows and a paragraph on the back of each one explainin' what each one is for. But need to find the connectors to make up the DC power cables. http://www.prc68.com/I/KS-24361.html Mail_Attachment -- Have Fun, Brooke Clarke http://www.PRC68.com http://www.end2partygovernment.com/2012Issues.html http://www.prc68.com/I/DietNutrition.html _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.

Brooke, Following the links from your page (nice work, thank you) lead me to your Thunderbolt page where you ponder the death of your iCruze monitor. If you refer to the picture of the microprocessor board, you will notice that the locations marked D1, D2 and D3 are populated by zero ohm resistors. That means that the 3 V microcontroller was powered from 5V. I am actually amazed that they worked at all, let alone worked for a while. It is a shame that fluke.l saved on the cost of 3 diodes that way. The 1N4148 is $.02 at Mouser in 25 pieces lots. Didier KO4BB On November 18, 2014 8:48:33 PM CST, Kris Keener <wt5v@outlook.com> wrote: >Nice write up, all of us on bench W enjoyed it. :-) > >73, > >Kris, WT5V > >-----Original Message----- >From: time-nuts [mailto:time-nuts-bounces@febo.com] On Behalf Of Brooke >Clarke >Sent: Tuesday, November 18, 2014 4:42 PM >To: Discussion of precise time and frequency measurement >Subject: [time-nuts] Lucent KS-24361 Web Page > >Hi: > >I've received the components of the Z3810A system and have some 8x10 >color glossy photographs with circles and arrows and a paragraph on the >back of each one explainin' what each one is for. But need to find the >connectors to make up the DC power cables. > >http://www.prc68.com/I/KS-24361.html > >Mail_Attachment -- >Have Fun, > >Brooke Clarke >http://www.PRC68.com >http://www.end2partygovernment.com/2012Issues.html >http://www.prc68.com/I/DietNutrition.html >_______________________________________________ >time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to >https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. >_______________________________________________ >time-nuts mailing list -- time-nuts@febo.com >To unsubscribe, go to >https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. -- Sent from my Motorola Droid Razr HD 4G LTE wireless tracker while I do other things.