Hello Community, I am looking for information regarding which version of LabVIEW is supported or recommended for use with the USRP N210, specifically when using LFRX and LFTX daughterboards. Could you please provide guidance on the most compatible version for this hardware configuration? Best regards, Ravi Paswan -- _Disclaimer: _© 2026 VVDN Technologies Pvt. Ltd. This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful.__

Hi Ravi, there's usually not a lot of LabView-related chatter here, so don't be surprised if you don't get an answer. In this case, I believe there is no restriction. Any LV version from the last few years should be fine. --M On Fri, Jan 23, 2026 at 5:29 AM Ravi Paswan via USRP-users < usrp-users@lists.ettus.com> wrote: > Hello Community, > > I am looking for information regarding which version of LabVIEW is > supported or recommended for use with the USRP N210, specifically when > using LFRX and LFTX daughterboards. > > Could you please provide guidance on the most compatible version for this > hardware configuration? > > Best regards, > Ravi Paswan > > > *Disclaimer: **© 2026 VVDN Technologies Pvt. Ltd. This e-mail contains > PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the > addressee(s). If you are not the intended recipient, please notify the > sender by e-mail and delete the original message. Further, you are not to > copy, disclose, or distribute this e-mail or its contents to any other > person and any such actions are unlawful.* > _______________________________________________ > USRP-users mailing list -- usrp-users@lists.ettus.com > To unsubscribe send an email to usrp-users-leave@lists.ettus.com >