RL
Ray Lee
Thu, Apr 20, 2017 8:55 PM
Hi Tim,
It looks like you're missing a $ there. I see a $ that is the end of your
bash prompt, but then you'd need a $ in your command, before
CSPACE_JEESERVER_HOME.
Ray
On Thu, Apr 20, 2017 at 1:34 PM, Tim Brewer Brewer@uwyo.edu wrote:
Thanks Ray, but still not found. Here’s a snip out of the cspace user’s
.bashrc:
Start of environment variable declarations inserted by Puppet code
<snip>
export CSPACE_JEESERVER_HOME='/usr/local/share/apache-tomcat-7.0.57'
export JEE_PORT='8180'
And here’s my output:
[cspace@localhost ~]$ CSPACE_JEESERVER_HOME/bin/startup.sh
bash: CSPACE_JEESERVER_HOME/bin/startup.sh: No such file or directory
Same result if I put ./ in front…
Cheers,
Tim
On Apr 20, 2017, at 2:23 PM, Ray Lee rhlee@berkeley.edu wrote:
Actually, you don't need the curly braces. Just make sure you've got that
environment variable set.
Ray
On Thu, Apr 20, 2017 at 1:06 PM, Ray Lee rhlee@berkeley.edu wrote:
Hi Tim,
That line should actually read
${CSPACE_JEESERVER_HOME}/bin/startup.sh
(Note curly braces). You should have the CSPACE_JEESERVER_HOME
environment variable set to your tomcat directory, so really all this is
doing is running the startup.sh that you located.
Ray
On Thu, Apr 20, 2017 at 7:17 AM, Tim Brewer Brewer@uwyo.edu wrote:
Hello,
I’m attempting my first install on Red Hat 7.3 workstation. I’ve done it
using the automated tool and manually. When I get to this step:
“Starting the server
Start the server:
$CSPACE_JEESERVER_HOME/bin/startup.sh
Wait for it to fully start up. (For more information on verifying server
startup, see [Starting Up CollectionSpace Servers].)"
I get command not found. Running a locate on startup.sh from / only
returns the startup.sh for Tomcat (which runs fine).
What did I miss?
Thanks,
Tim
Talk mailing list
Talk@lists.collectionspace.org
http://lists.collectionspace.org/mailman/listinfo/talk_lists
.collectionspace.org
Hi Tim,
It looks like you're missing a $ there. I see a $ that is the end of your
bash prompt, but then you'd need a $ in your command, before
CSPACE_JEESERVER_HOME.
Ray
On Thu, Apr 20, 2017 at 1:34 PM, Tim Brewer <Brewer@uwyo.edu> wrote:
> Thanks Ray, but still not found. Here’s a snip out of the cspace user’s
> .bashrc:
>
> # Start of environment variable declarations inserted by Puppet code
> <snip>
> export CSPACE_JEESERVER_HOME='/usr/local/share/apache-tomcat-7.0.57'
> export JEE_PORT='8180'
>
> And here’s my output:
>
> [cspace@localhost ~]$ CSPACE_JEESERVER_HOME/bin/startup.sh
> bash: CSPACE_JEESERVER_HOME/bin/startup.sh: No such file or directory
>
> Same result if I put ./ in front…
>
> Cheers,
> Tim
>
> On Apr 20, 2017, at 2:23 PM, Ray Lee <rhlee@berkeley.edu> wrote:
>
> Actually, you don't need the curly braces. Just make sure you've got that
> environment variable set.
>
> Ray
>
> On Thu, Apr 20, 2017 at 1:06 PM, Ray Lee <rhlee@berkeley.edu> wrote:
>
>> Hi Tim,
>> That line should actually read
>>
>> ${CSPACE_JEESERVER_HOME}/bin/startup.sh
>>
>> (Note curly braces). You should have the CSPACE_JEESERVER_HOME
>> environment variable set to your tomcat directory, so really all this is
>> doing is running the startup.sh that you located.
>>
>> Ray
>>
>>
>>
>>
>> On Thu, Apr 20, 2017 at 7:17 AM, Tim Brewer <Brewer@uwyo.edu> wrote:
>>
>>> Hello,
>>>
>>> I’m attempting my first install on Red Hat 7.3 workstation. I’ve done it
>>> using the automated tool and manually. When I get to this step:
>>>
>>> “Starting the server
>>>
>>> Start the server:
>>> $CSPACE_JEESERVER_HOME/bin/startup.sh
>>>
>>> Wait for it to fully start up. (For more information on verifying server
>>> startup, see [Starting Up CollectionSpace Servers].)"
>>>
>>> I get command not found. Running a locate on startup.sh from / only
>>> returns the startup.sh for Tomcat (which runs fine).
>>>
>>> What did I miss?
>>>
>>> Thanks,
>>> Tim
>>>
>>> _______________________________________________
>>> Talk mailing list
>>> Talk@lists.collectionspace.org
>>> http://lists.collectionspace.org/mailman/listinfo/talk_lists
>>> .collectionspace.org
>>>
>>>
>>
>
>