Hi, i'm using ettus USRP X300 in UBUNTU 14.04 64 bit and while building Xilinx Vivado Design Suite HLX Editions 15.4, i am facing the following error debadrita@vipl:~/ettus_uhd/uhd/fpga-src/usrp3/top/x300$ make GUI=1 make -f Makefile.x300.inc bin NAME=X300_HG ARCH=kintex7 PART_ID=xc7k325t/ffg900/-2 BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 X300=1 EXTRA_DEFS="BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 X300=1" make[1]: Entering directory `/home/debadrita/ettus_uhd/uhd/fpga-src/usrp3/top/x300' BUILDER: Checking tools... * GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu) * Python 2.7.6 * ERROR: Vivado not found in environment. Please run setupenv.sh make[1]: *** [.check_tool] Error 1 make[1]: Leaving directory `/home/debadrita/ettus_uhd/uhd/fpga-src/usrp3/top/x300' make: *** [X300_HG] Error 2 debadrita@vipl:~/ettus_uhd/uhd/fpga-src/usrp3/top/x300$ sudo make GUI=1 make -f Makefile.x300.inc bin NAME=X300_HG ARCH= PART_ID= BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 X300=1 EXTRA_DEFS="BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 X300=1" make[1]: Entering directory `/home/debadrita/ettus_uhd/uhd/fpga-src/usrp3/top/x300' BUILDER: Checking tools... * GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu) * Python 2.7.6 * ERROR: Vivado not found in environment. Please run setupenv.sh make[1]: *** [.check_tool] Error 1 make[1]: Leaving directory `/home/debadrita/ettus_uhd/uhd/fpga-src/usrp3/top/x300' make: *** [X300_HG] Error 2 Please help me with this. BR Debadrita.

Hi Debadrita, Note the error towards the end of the output: "* ERROR: Vivado not found in environment. Please run setupenv.sh" You need to source the setupenv.sh script which is located in the fpga-src/usrp3/top/x300 directory before running the make command. Additional details are at this page: http://files.ettus.com/manual/md_usrp3_build_instructions.html Under the section: Build Instructions (Xilinx Vivado only) -> Makefile based Builder Regards, Nate Temple > On Feb 6, 2017, at 10:26 PM, DEBADRITA DAS via USRP-users <usrp-users@lists.ettus.com> wrote: > > Hi, > > i'm using ettus USRP X300 in UBUNTU 14.04 64 bit and while building Xilinx Vivado Design Suite HLX Editions 15.4, i am facing the following error > > debadrita@vipl:~/ettus_uhd/uhd/fpga-src/usrp3/top/x300$ make GUI=1 > make -f Makefile.x300.inc bin NAME=X300_HG ARCH=kintex7 PART_ID=xc7k325t/ffg900/-2 BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 X300=1 EXTRA_DEFS="BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 X300=1" > make[1]: Entering directory `/home/debadrita/ettus_uhd/uhd/fpga-src/usrp3/top/x300' > BUILDER: Checking tools... > * GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu) > * Python 2.7.6 > * ERROR: Vivado not found in environment. Please run setupenv.sh > make[1]: *** [.check_tool] Error 1 > make[1]: Leaving directory `/home/debadrita/ettus_uhd/uhd/fpga-src/usrp3/top/x300' > make: *** [X300_HG] Error 2 > debadrita@vipl:~/ettus_uhd/uhd/fpga-src/usrp3/top/x300$ sudo make GUI=1 > make -f Makefile.x300.inc bin NAME=X300_HG ARCH= PART_ID= BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 X300=1 EXTRA_DEFS="BUILD_1G=1 BUILD_10G=1 SFP0_1GBE=1 SFP1_10GBE=1 X300=1" > make[1]: Entering directory `/home/debadrita/ettus_uhd/uhd/fpga-src/usrp3/top/x300' > BUILDER: Checking tools... > * GNU bash, version 4.3.11(1)-release (x86_64-pc-linux-gnu) > * Python 2.7.6 > * ERROR: Vivado not found in environment. Please run setupenv.sh > make[1]: *** [.check_tool] Error 1 > make[1]: Leaving directory `/home/debadrita/ettus_uhd/uhd/fpga-src/usrp3/top/x300' > make: *** [X300_HG] Error 2 > > Please help me with this. > > BR > Debadrita. > _______________________________________________ > USRP-users mailing list > USRP-users@lists.ettus.com > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com