Empathy List Archives

BS

Bob Stewart

Wed, Jun 28, 2023 3:38 AM

Someone, hopefully here, mentioned that these OCXOs were modeled on the HP 10811. So, I grabbed one off of ebay and just realized that I don't have a pinout for it. Could someone post it for me?

Bob

Someone, hopefully here, mentioned that these OCXOs were modeled on the HP 10811. So, I grabbed one off of ebay and just realized that I don't have a pinout for it. Could someone post it for me? Bob

KL

Keelan Lightfoot

Wed, Jun 28, 2023 8:59 PM

Bob,

Here’s a link to what was sent to me by Bob Raker:

http://beefchicken.com/gps/trimble/4000/sxdeepdive/ocxo.pdf

Keelan

On Jun 28, 2023, at 1:36 PM, Bob Stewart via time-nuts time-nuts@lists.febo.com wrote:
Someone, hopefully here, mentioned that these OCXOs were modeled on the HP 10811. So, I grabbed one off of ebay and just realized that I don't have a pinout for it. Could someone post it for me?

Bob

time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe send an email to time-nuts-leave@lists.febo.com

Bob, Here’s a link to what was sent to me by Bob Raker: http://beefchicken.com/gps/trimble/4000/sxdeepdive/ocxo.pdf - Keelan > On Jun 28, 2023, at 1:36 PM, Bob Stewart via time-nuts <time-nuts@lists.febo.com> wrote: > Someone, hopefully here, mentioned that these OCXOs were modeled on the HP 10811. So, I grabbed one off of ebay and just realized that I don't have a pinout for it. Could someone post it for me? > > Bob > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe send an email to time-nuts-leave@lists.febo.com

BC

Bob Camp

Wed, Jun 28, 2023 11:02 PM

Hi

If it looks like a 10811, it is pretty much guaranteed to have the same pinout.

Bob

On Jun 27, 2023, at 11:38 PM, Bob Stewart via time-nuts time-nuts@lists.febo.com wrote:

Someone, hopefully here, mentioned that these OCXOs were modeled on the HP 10811. So, I grabbed one off of ebay and just realized that I don't have a pinout for it. Could someone post it for me?

Bob

time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe send an email to time-nuts-leave@lists.febo.com

Hi If it looks like a 10811, it is pretty much guaranteed to have the same pinout. Bob > On Jun 27, 2023, at 11:38 PM, Bob Stewart via time-nuts <time-nuts@lists.febo.com> wrote: > > Someone, hopefully here, mentioned that these OCXOs were modeled on the HP 10811. So, I grabbed one off of ebay and just realized that I don't have a pinout for it. Could someone post it for me? > > Bob > _______________________________________________ > time-nuts mailing list -- time-nuts@lists.febo.com > To unsubscribe send an email to time-nuts-leave@lists.febo.com

time-nuts@lists.febo.com

Piezo 2950229 pinout?