With > regular > three-strand twisted rope, I've always made the splices by hand, a > technique > that is easy enough to do but difficult to explain and takes some > practice. > Splicing braided rope is much easier but requires a splicing needle, the > size > of which depends on the thickness of the rope.

Check out their website at gulfcoastfilters.com. I >installed one several years ago, and have been most impressed with the >job it did on cleaning up our fuel and tanks.

When asked how he past the physical, he said it was easy; the doctor held up a ketchup bottle and asked what color he saw. At least he claims this happened. Reply: This is a serious issue for a lot of us who are color weak. Note that we do not refer to it as color "blind."

If you need timed execution of SPI transactions, you could also combine the two: Use an easy-to-use SPI bridge or microcontroller or … and just (de)assert the CS line of SPI using timed commands and the standard GPIO.

Tacoma, WA, 98405 [cid:image002.jpg@01D10293.907FFCD0] website | facebook | twitter | instagram

This is > a learning experience. > > John > --- > John De Armond > See my website for my current email address > http://www.neon-john.com Cleveland, Occupied > TN > > *fas-cism* > (fash'iz'em) n.

> -----Original Message----- > From: time-nuts-bounces@febo.com > [mailto:time-nuts-bounces@febo.com] On Behalf Of Esa Heikkinen > Sent: Tuesday, January 27, 2009 2:46 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] Home made GPS disciplined atomic clock > > > Its relatively easy to assemble such a system. > > A PC sound

The module was easy to configure and had a decent 1PPS output. So far, everything is working (hardware-wise, I still have some NTP settings to tweak). I have the 256MB version of the Pi and it seems to handle the load just fine. Open Systems International, Inc.

Bob On Mar 30, 2013, at 10:23 AM, Jim Lux wrote: > On 3/29/13 9:01 AM, Bob Camp wrote: >> Hi >> >> Too much tuning range is easy enough to fix. Use a pot to set it on frequency and then hook it to the rest of the "stuff" with a fixed resistor.

I know that generally, easements are fairly easy to assign, at least partially, but I wasn’t sure if there were restrictions on a municipality doing something like that when the easement was part of a dedicated plat.