Dear List, thank you to all for the missing digests. I have them all! Thanks! Lee Ankara

512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Board revision: 1 Direct connection on mmc2 Recognized Ettus Research USRP-E (rev 4 E) Die ID #5a160004000000000403990c0a00b00f Net: smc911x-0 Warning: failed to set MAC address Hit any key to stop autoboot: 0 reading

A great source of information about climate change impacts in the Northeast can be found at the website of the Union of Concerned Scientists. Their reports translate the science into easy to understand impacts that we are likely to see in the northeast included state by state summaries.

> Should I maybe keep track of all my buddies in a separate vector containing > all buddies with their uri and their status, to not enum them over and over > again? Does anybody have an idea for this? > You can do that, but probably you'll only save yourself a couple of microseconds, so probably it's not worth managing the complexities.

date=2024-08-23> 8/24: Ott and Hunter Winery 204 1st Street, Langley WA All ages welcome Tickets are available on Ott and Hunter's website: Ott & Hunter Wines - Kareem Kandi World Orchestra Feat.

All four were replaced and they have been working fine. The two older 732A's have thermistor values in the 3k-4k range. The newer unit (based on the newer heater rev) is around 4.25K. All three had their potentiometers changed on the regulator and pre-regulator boards. The datecodes on all appeared to be from 1985.

Not sure yet what, if anything, is >> beyond all of that.

All I am trying to do is offer a choice. Anchoring smarter isn't the easy way out but to some it can be more rewarding. >For example, they know that sand is "good bottom."

http://www.mrrace.com/TrimbleGPS/BuildingTheMount.jpg To hold the GPS antenna in place at the top of the container, I cut a small aluminum plate, carefully drilled 3 holes for 2-56 hardware through the top of the container, using the aluminum plate as a template.

This slowly sweeps through all the phase-relationships between the reference oscillator and the counter input, thus sweeps the interpolator phase. It then chooses the calibration constant giving the lowest RMS error, as this is the best compensation for the hardware min-point. All this is free from memory.