I have been following the back > and forth comments on the Time-Nuts list about improving the > Trimble T-bolt's 10 MHz output but confess that most of it is pretty > much deeper technical voo-doo than I am comfortable with.

space is limited to 10-each maker/creator space is designed with your safety in mind. Viet-kitchen lunch/drinks included- Class is this Saturday 12-6, $125, masks required, sign up through fablabeducation.org- Or reach out-reneehealy@yahoo.com with any questions. You won’t be disappointed Tacoma!! Sent from my iPhone

I decided to go with 10:30am on the 16th, because that all of the officers are available at that time. I believe only Silja is unavailable, but she had indicated that she could join us at 11am. Apologies to Silja but I didn’t think it was wise to put off the meeting much longer. I’ll put together an agenda tomorrow.

Best regards, Marcus On 05/20/2015 10:00 AM, Xinke Zhang wrote: Hi, the version of daughterboards used is sbx-120.

Geller 10 volt ref. Hello WarrenS, Is it possible to have some details of your 1 transistor 1st order temperature modification, on the Geller 10 volt ref. ?

The captain wants to leave Oct 10. which I think is nuts. I have discussed the main issues but having never done this route...all my deliveries have been Erie / outside East Coast runs...I don't have an appreciation for weather on Huron and Michigan in mid/late Oct. BTW, the captain has never done this route either. Any suggestions, warnings.

November 10, 2002 (10-13 degrees C, overcast, wind SSE at 5-7 mph) Open from 9:00 - 15:00 E.S.T. (6.0 hours, 60.00 Net Hours) (Rain delayed opening, and resumed again after closing) Total Banded: 7, plus 2 recaptures Hermit Thrush - 3 American Tree Sparrow - 1 Fox Sparrow - 1 (7th for season, ties record) White-throated Sparrow - 1 (plus one recapture, banded

Ontario/Quebec Ottawa/Gatineau April 10, 2014 Ottawa/Gatineau (Canada National Capital Region) E. Ontario, W.

With 10 GbE over copper, the shorter the better. If you need the length, you should be using fibre. If you still have issues, please provide a little more information: Are you connected directly with the X310 or through a switch? How are you testing the performance? Are you using your own application or benchmark_rate?

You still are past a half wave at 10 MHz / 30M. You can’t get around unterminated cables acting as antennas at that sort of distance. If you can distribute the amplifiers here and there, you *might* be able to reduce that a bit. Three amps spaced < 30’ apart (with good coax in between) would be a start. How many “endpoints” are there?