As you can see, we have only added an additional thread calling "get_time_now()" each 10 milliseconds. Without this call, the example works normally. Please also note that this problem does not occur with Ubuntu 16.04 (only on Windows 10). Do you have any idea of what could be wrong, or a suggestion to try on our side? Thank you!

Weather radar suggested this would continue throughout the day, so the count ended at 10:30 am. Raptor Observations: There was little or no movement in the morning. A brief break in the weather saw three individuals move through. Rain kept anything from moving past the first full hour of counting.

. >>> >>> --- On Thu, 9/12/10, Dabney Crump wrote: >>> >>> >>> From: Dabney Crump >>> Subject: [time-nuts] WTB up to 10 pieces - Rockwell Jupiter - TU30-D140 >>> To: time-nuts@febo.com >>> Date: Thursday, 9 December, 2010, 21:43 >>> >>> >>> Hi All, >>> I'm looking for approximately 10 of the Jupiter GPS modules >>> for

Beamer Conservation Area Grimsby, Ontario, Canada Daily Raptor Counts: Mar 10, 2006 ------------------------------------------------------------------- Species Day's Count Month Total Season Total ------------------ ----------- -------------- -------------- Black Vulture 0 0 0 Turkey Vulture

It would be good to learn which antennas are 10 Volt >>> types. >>> For example is the Trimble 4000ST L1 Geodetic, Model 14177-00 a 10 >>> Volt antenna?

. > > Bob > > > > -----Original Message----- > From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On > Behalf Of Electronics and Books > Sent: Thursday, February 18, 2010 9:54 AM > To: Discussion of precise time and frequency measurement > Subject: [time-nuts] Advice on 10 MHz isolation/distribution SRS FS700 > > An easy way to make a 10 MHz

-Year Action Plan Adopted to Improve Air Quality The Environmental Protection Agency has adopted a 10-year action plan to improve air quality and reduce unhealthy wood smoke pollution in the Tacoma/Pierce County Smoke Reduction Zone area.

List,   My reply to Javier Herrero   P  Double the 10 MHz to 20 MHz.   P  With another circuit of 74HC390’s divide 10 MHz to 200 KHz.  Then double it twice to 800 KHz with LM 1496 DBM’s.  Apply the two frequencies to a LM 1496 DBM and use a LPF to get the 19.2 MHz.   P  Hardware complicated?  A bit.   J  >Only a bit? 

The control loop for the 10 MHz ( or whatever frequency) output is designed to clean up that variation so that the variation in the 10 MHz is much less both short and long term. I have probably over-simplified this but that's the basic situation.

> A Tektronix DD501 will do divide by 10, or any number from 00002 to 99999. > -John Thanks, was hoping for something as a permanent, small and cheap fitting, standalone. Don't really want to tie up my 7233 running something to run something else IYSWIM?