Yes the fact that it is a tangent at the top will define a unique circle with two points. You haven't drawn it as a tangent in your 2D sketch though. The center needs to be at the same height as your top point, i.e. 75mm, and equidistant from your top point and your bottom point.

If the top surface is not level, (by more than one layer height) then the Hilbert curve top layer will show that.

SRAM_FIFO_SIZE=16 >>>> EXTRA_DEFS="ETH10G_PORT1=1 BUILD_1G=1 BUILD_10G=1 NO_DRAM_FIFOS=1 >>>> SRAM_FIFO_SIZE=16 " >>>> make[1]: Entering directory `C:/Users/creed/Documents/ >>>> kintex7/working/uhd/fpga/usrp3/top/x300' >>>> make[1]: *** No rule to make target `C:/Users/creed/Documents/ >>>> kintex7/working/uhd/fpga/usrp3/top/x300/C:/Users/creed/Documents/kinte

I also bolted two 2x4's front to back of the table top frame dividing it in thirds for rigidity. I then bolted a piece of good grade particle board to the top of the frame. The table top extends about 2" over the front of the frame and on the front of the frame I installed a long plug strip.

> Doesn't make any sense unless one has $$ as a top priority, already has > a spool of RG-6 quad shield, etc...  but I specifically stated that $$ > is not a top priority....  Not really even in the top 5 or 10...

. > If the same circuit is used for detecting the top of travel, then its > failing as its dual z motors and useing a default because it hammers the > top of travel for about a full second. I'll ask prusa monday.

In other words, a rounded > chamfer around the top. > >> > > >> > The attached example 2D shape is about 5" wide overall in real-time > and is to be extruded to 1" high. What can be done to have this extrusion > contain a small, 1/4" radius chamfer around the top? > >> > > >> > Any ideas?

But I don't need a top or bottom. So how do I reorder to leave out the top and bottom, all I want are the sides which will then be built up on the inside to do the job, effectively winding up on the printer as a half box with a big difference removing about half the box.

of the inner part > > > of > > > the box show up, with the top coloured by the '#'.

shape, how can I make a solid with one on the bottom and the other on > the top.