Hello everyone, I am trying to connect the N320 to my windows 10, but I can’t install the usb driver from the hardware settings of the device, either it is automatically installing best suitable driver like standard com driver or not installing .inf file from UHD/WinUSB folder!

On Mon, May 10, 2021 at 3:01 PM Tom Holmes via mvus-list < mvus-list@lists.febo.com> wrote: > I know have in my possession a 12 slot waveguide antenna for the beacon > project. It has a coax to WG adapter on the bottom. > As is, the S11 dip is -18 dB at about 10.000 GHz, while S11 at 10.368 GHz > is -13 dB.

On Mon, May 10, 2021 at 3:01 PM Tom Holmes via mvus-list < mvus-list@lists.febo.com> wrote: > I know have in my possession a 12 slot waveguide antenna for the beacon > project. It has a coax to WG adapter on the bottom. > As is, the S11 dip is -18 dB at about 10.000 GHz, while S11 at 10.368 GHz > is -13 dB.

For an oven, you can expect a heating current that then dies of as it stabilize temperature, and for output you notice if you have any and if it is in any vincinity of 10 MHz. If it doesn't stabilize, increase voltage and let sit again. Give it at least 15 min on each setting.

All the others left on Sept. 10-11. > > Sent from Mail for Windows 10 > > From: Kathy Edwards via CTBirds > Sent: Friday, September 20, 2019 10:23 AM > To: ctbirds@lists.ctbirding.org > Subject: [CT Birds] Hummer still around > > Kathy Edwards > New Canaan yard > I have an immature (I think) hummer still frequenting my feeders and > getting something from the

. --- On Thu, 9/12/10, Dabney Crump wrote: From: Dabney Crump Subject: [time-nuts] WTB up to 10 pieces - Rockwell Jupiter - TU30-D140 To: time-nuts@febo.com Date: Thursday, 9 December, 2010, 21:43 Hi All, I'm looking for approximately 10 of the Jupiter GPS modules for a personal timing project; I time automotive

At 10 Mhz and the first few harmonics values on the order of 1 to 20 nF would be below SRF. -John -----Original Message----- From: time-nuts-bounces@febo.com [mailto:time-nuts-bounces@febo.com] On Behalf Of Thomas S.

which if I assume is the Date Code puts them in 2006. 73, Dick, W1KSZ Sent from Outlook ________________________________ From: time-nuts on behalf of Bob kb8tq Sent: Tuesday, February 5, 2019 8:32 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] 10

Taka, What happens to the timing of the PPS output and/or the phase of the 10 MHz output during these wonky times? This inquiring mind wants to know, as it is getting pretty close to ordering a PRS-10 for its own use.

The other part will be a fairly simple analog DMTD system, with fixed 100 Hz offset for 10 MHz, and 50 Hz for 5 MHz. I found I have a nice old 10 MHz OCXO that has mechanical tuning only, that will be committed (built in) to this project. It's set now for 9.9999 MHz (10 MHz - 100 Hz).