-John =============== > I've heard of coin cells failing due to air freight. The pressure changes > are always something to consider. > > I put a lot of camping gear in ammo cases. You can always tell which cases > seal because they are a bugger to open after a trip from the mountains. > > ------Original Message------ > From: J.

It is interesting that either folks look at phase noise or ADEV, but few seems to be looking at both sides of the coin, depending on what they are doing. Cheers, Magnus

How could such a person "figure out the EFC voltage needed" with out either coining cycles? I'm thinking about turning the overflow counter off after lock. But without one I think we have a chicken and egg problem where you would need an accurate frequency reference to build a GPSDO. -- Chris Albertson Redondo Beach, California

As it turns out, even gold coin has two sides to it. >> I have found that Shlepnev and McMorrow conducted extensive research and published data, some of which is presented here http://www.simberian.com/Presentations/NickelCharacterizationPresentation_emc2011.pdf > > the ever useful http://www.microwaves101.com/ site has an excellent discussion of this under

>Both of these have 3 battery packs made of some form of coin cell, NiCd, >225ma, 5 to a stack. These are what I'm familiar with (I presume you mean 4 packs, not 3?). The batteries are Y-5201, long obsolete. >The newest 419 is different. Different battery holder, and uses 4 packs >of 5 1/3AA cells.

. > > Here's my attempt at a coin using the new metaballs() function in the > BOSL2 library for OpenSCAD.

I think I also generated the coin in openscad too, > but not found it yet. > > On 16/02/2025 01:11, Sanjeev Prabhakar wrote: >> Can you share the output image. >> I am thinking of giving a try to cadquery. >> Long back i tried,  but it was not very user friendly.

I'd probably flip a coin, put it with either strings or lists, and put a cross-reference from the other. There should be a master list, probably alphabetical, somewhere, but that should only be an index.

All three SVG files have the same values of: width="571.5mm" height="428.625mm" viewBox="0 0 571.5 428.625" Am I correct that OpenSCAD is not preserving this information upon import? Thanks, Ken

She is 52" Overall length, 15' beam and 26' from the keel to the top of the pilot house. I understand there are truckers that will take the boat west to east through Mexico. They have no bridge problems and the cost is much less. As soon as I have some information about this I will let you know.