Someone will correct me and the thread will never die.) The rate at which a mass of radium becomes inert is expressed as its half-life, which is the TIME that it takes for half of the remaining radium to become inert. The decay is exponential, as are so many natural things.

Emery"<die@dieconsulting.com> "IIRC the plane is expected to adjust its burst uplink frequency and timing to come out right at the satellite receive antenna... thus compensating for the uplink Doppler at L band and the time delay too.

There are things like ROM’s with known defects that die and are a bit more problematic to replace ( = get the replacement CPU board). Bob > On Dec 18, 2014, at 6:10 PM, Orin Eman wrote: > > #151518774079 > > Currently at $49.95 plus shipping. > > It's showing a ROM error (7.7) on startup.

. > Kind of a crazy thing to do but hated to see the systems die. > Regards > Paul > WB8TSL > > On Sat, Jul 11, 2015 at 11:14 AM, James Robbins > wrote: > > > Does anyone know of any other genuinely useful purpose to which the > > Austron 2100F, SRS FS700, etc receivers can be put in the US since the > > demise of Loran?

. > > They're in the same TO5, but I don't know if they're the same die. > > I have about 45-50 microvolt difference between their bases. Monitor that over time to see if there is a correlation.

> > The interesting output will be coming out of a LPF so > most of the noise will die there? > You still raise the noise-level which is in the pass-band of those filters. This will be true both for white noise and flicker noise.

Pg 60 Discusses track & hold, with a reference to the HDD-1206 as > including track/hold on die. > > On Tue, Jul 26, 2016 at 2:46 PM, Richard (Rick) Karlquist < > richard@karlquist.com> wrote: > > > > > > > On 7/25/2016 10:42 PM, Scott Stobbe wrote: > > > >> > >> dramatically different due to glitching on code transition.

Stainless is very tenacious stuff, and as a result, when it is drawn through a die when sizing it as tubing, it gets axial ridges formed by galling, and damage to the dies.

It is not at all uncommon for them to fill up with dust, overheat, and die. Popping them open every 10 years or so to clean them out is well worth the effort. Bob > On Mar 5, 2017, at 8:54 PM, Scott Stobbe wrote: > > Recently the fan in my 53131 has been making a pretty awful sound, so its > time to replace it.

. > > It's even reworkable (e.g. you can soften the blob & solder and scrape the die off and bond a new one down). > > I suspect that there is a wide variation in the material you blob on there and so forth. > > > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com