If you select the email action "reply to all," remember everyone gets your post twice -- once via the List and once directly. Instead, just send your message by just placing the Great-Loop@lists.trawlering.com in the address bar. And, as always, please "snip" out all unnecessary portions of the previous message(s).

Using Collage as a Dynamic Element in a Painting Tuesday, May 26 - Gig Harbor Methodist Church, 7400 Pioneer Way, Gig Harbor Refreshments and Get Acquainted 5:30 Meeting 6:00 Free Demo 7:00 - 8:00 Tamarindo - Collage & Acrylic on Canvas http://kathleenkemly.com/ Kemly will demonstrate

With half fuel, top end was 23 knots, and she cruised very easy at 18 knots, consuming 12-13 gals per hour, and at 15.5 knots, only consuming 9 gals per hour. The D3 is an all aluminum engine and weighs 500 lbs less than the D4 which is a cast iron engine.

There is no easy way to place my T-Bolt antenna above the tree-top foliage.

The footprints are still there, I only removed them from the BOM. > > Schematic and a screenshot of the top and bottom sides attached. > > BR, > Matthias > > On Montag, 14. Dezember 2020 10:16:32 CET Matthias Welwarsky wrote: >> Dear all, >> >> I've received quite a number of emails with feedback, thank you very much >> for your interest and participation.

I own two power catamarans, a 34 ft and a 26 ft Glacier Bay. I am looking for a boat with more of a cruiser configuration. I have been looking at some information sent to me about the "Quantum 4000" but can find nothing except what is on their website and the brochures they have e-mailed me.

The USRP N310 Letter of Volatility lives on the National Instruments website. http://www.ni.com/pdf/manuals/377420a.pdf -Robin On Thu, Jul 26, 2018 at 8:34 AM, Tillson, Bob (US) via USRP-users < usrp-users@lists.ettus.com> wrote: > Hello, > > > > I was looking on the kb, but did not see, is there a Certificate of > Volatility for the N310 somewhere?

So far only grief > glimpses. > > On Sat., Sep. 26, 2020, 1:32 p.m. Mike V.A.

Their little monitoring widgets record all of that and send it back to the databases. I'll bet the data is available, you just have to know how to ask for it.

In diagram 2.1 (PCB1, Floating Analog), the top of resistor R22 should connect to the Source terminals of TR4, TR9 and the top of R26. This "wire" should NOT connect to the gate of TR4 as it appears to do in the schematic. I couldn't work out what was going on here for a while, and then the penny dropped!