I was looking at a page of this website here ( https://lists.ettus.com/empathy/thread/XQNB5ZXDDIREMMGXSJIHEUCFB2EBMKOF ), so I thought I would email you. I'd like to know if you're actively working with outside organizations to continue covering this vital topic on your website.

BUILDER: Releasing IP location: /home/wtt/rfnoc/src/uhd-fpga/usrp3/top/n3xx/build-ip/xc7z100ffg900-2/addsub_hls Using parser configuration from: /home/wtt/rfnoc/src/uhd-fpga/usrp3/top/n3xx/dev_config.json [00:00:00] Executing command: vivado -mode batch -source /home/wtt/rfnoc/src/uhd-fpga/usrp3/top/n3xx/build_n3xx.tcl -log build.log -journal n3xx.jou CRITICAL

There is an open area on the ends, near the top of the tank, which allows me to see that there a space about 4-5 inches deep between the top of the tank and the bottom of the deck above. It looks like the top of the tank is rusted, probably from a leak or leaks coming through the deck (fiberglass sandwich covered with teak).

Although the tops had surface rust, we did not have any large flaking on the tops and had that been the only problem, I would have cleaned and re-coated the tops or possibly fiberglass the tops. Our problem was with the lower seams.

),top],[1,0,top],[0.5,-cos(30),top],[-0.5,-cos(30),top],[-1,0,top],[-0.5,cos(30),top], > > [0.5,cos(30),bot],[1,0,bot],[0.5,-cos(30),bot],[-0.5,-cos(30),bot],[-1,0,bot],[-0.5,cos(30),bot] > ], > faces = [ > [0,1,2],[0,2,3],[0,3,4],[0,4,5], > > [0,6,7],[0,7,1],[1,7,8],[1,8,2],[2,8,9],[2,9,3],[3,9,10],[3,10,4],[4,10,11],[4,11,5],[5,11,6

chunk       // cube([mountfh - armtop, mountfw, mountfh]);      // remove top chunk         cube([mountfh - armtop, mountfw, mountfh]); }     //    translate([28.25, mountfw, mbd]);             // set location to remove top chunk     //    cube([9, mountfw, mountfh]); //translate ([40, 40, 0]) //    cylinder(h=40, d=15);

/top/USRP2/u2_core.v:617: error: Unknown module type: vita_rx_chain >> ../sdr_lib/dsp_core_rx.v:148: error: Unknown module type: sfft >> ../top/USRP2/u2_core.v:645: error: Unknown module type: vita_rx_chain >> ../top/USRP2/u2_core.v:666: error: Unknown module type: ext_fifo >> ../top/USRP2/u2_core.v:694: error: Unknown module type: vita_tx_chain >> ..

nodeuser/data/alt_iris/uhd_fpga/uhd/fpga-src/usrp3/top/tcl/ise_helper.tcl "" > make[1]: Leaving directory `/home/nodeuser/data/alt_iris/uhd_fpga/uhd/fpga-src/usrp3/top/b200' Here's the log line showing where it's generated the .xise file

. > > If your cone is anchored at the top, scaling it up will expand it at the base without changing the shape of the top. > > This is easy to demonstrate with BOSL2, because you can natively anchor at the top: > > include > > s = 1; > scale(s) zcyl(r1=10, r2=0, h=10, anchor=TOP); > as you change s, observe that the top portion of the cone

Drop a line on this site or our email, we have posted on our website, if you have any questions, corrections, suggestions. Bill (one of the geologists on this site)