-- Raj, VU2ZAP Bangalore, India.

wrote: > After rebooting one of my servers, I noticed that I was no longer > getting information from my Thunderbolt. Low and behold, it really seems > to be no longer supplying TSIP packets on the serial port. The PS is > okay, and the PPS and 10Mhz outputs also are working. Its just the > serial output which seems to be broken. Connected it directly to a PC, > and tried with both Heather and Tboltmon. Heather says No COM1 Serial > Port data seen, and Tboltmon shows data being sent, but nothing being > received. Even tried a factory reset via Tboltmon, to no avail. > > Have no idea why it might have stopped working. Any suggestions ? TIA. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > >

- Revar > On Oct 23, 2020, at 5:26 AM, nop head wrote: > >  > IIRC there is a fault in the STL spec which means you can't tell for sure if the file is binary or ascii because the marker for ascii can occur by chance in the binary version.

(as an image so email doesn't affect it) > -----Original Message----- > From: Discuss [mailto:discuss-bounces@lists.openscad.org] On Behalf Of Caddiy > Sent: Mon, 26 Oct 2020 12:03 > To: discuss@lists.openscad.org > Subject: Re: [OpenSCAD] Another missing feature? (All I want for Xmas...) > > Ah, now it works! Thanks.

The sign-up steps take a few minutes and are really easy.

> >>>>> Paul > >>>>> WB8TSL > >>>>> > >>>>> On Mon, Nov 26, 2012 at 6:59 PM, Rich and Marcia Putz >>>>>> wrote: > >>>>> > >>>>>> Hi all; > >>>>>> > >>>>>> I 'm hearing Loran C signals here in northern Indiana this evening, > >>>>>> I > >>>>>> guessing from New Jersey. Anyone else hearing these?

Measurements 26" between pontoons, curved sides wrap around inside of pontoons and becomes 41" wide top/seats, 14" deep-fore-aft. Weighs about 16 # so shipping is cheap. Asking $115. You pay shipping or pick up in Houston TX area. Can forward more details and pics or questions: 281-383-2927

> > > > > > I don't see an easy way to create the original shape using an analytic method. You'd need to form a grid over the top of the knob to form the polyhedral face of the top, and that seems pretty difficult to do.

From: Beth Anne Childs Sent: Wednesday, January 26, 2022 4:21 PM To: Krystina Phillips ; OAMA@lists.imla.org Subject: [Oama] Re: Annexation Kim Payne and Tammy Ewing get all of the credit for the attached! Here is a checklist/process and a Notice that I used for Bristow recently.

i was just wondering who all was planning on getting tickets the 13th for the all blacks game