Had the fitting been located at the bottom of the tank and equipped with a valve (plugged of course), it would have been easy to periodically drain all the water from the tank. Another installation problem was discovered after removing the acoustical tile from the aft tanks.

Station: High Park, Toronto, Ontario View Period: October 26 - November 1, 2009 Station coordinator: Don Barnett Counters: D. Barnett, R. Carswell, C.Harte, M. Kelch, A.M. Leger, N. McHugh, N. Murr, D. Peuramaki, H. Shapiro, D.Woods GTRW Webmasters: A. Hampton & D.Woods This week we only observed raptors on Nov. 1/09.

For Roy's Daily Report: >From Gina Nichol, Steve Bird and Sunrise Birding group: 8/26/14 - Milford, Coastal Center at Milford Point - YELLOW-CROWNED NIGHT HERON, RED KNOT, SALTMARSH SPARROW Coastal Center at Milford Point, New Haven, US-CT Aug 26, 2014 11:00 AM - 1:37 PM Protocol: Traveling 0.5 mile(s) Comments: Sunrise Birding Walk with Gina Nichol and

The hosts will provide three-nights’ accommodation (June 24-26) near Ewha Womans University, one of the most beautiful campuses in South Korea located in central Seoul.

A Great Gray Owl spent the afternoon perched at the edge of a mixed woodlot beside Lakeshore Road on the west edge of Port Hope yesterday, November 26. It has not been relocated so far today. This seems to be the first sighting significantly south of Algonquin Park in the current Great Gray Owl movement.

Innisfree Innisfil, Ontario, Canada Daily Raptor Counts: Aug 26, 2006 ------------------------------------------------------------------- Species Day's Count Month Total Season Total ------------------ ----------- -------------- -------------- BV 0 0 0 TV 2

Exhibits and restaurant are open daily, 10 am to 5 pm, starting on April 26.

"All our new songs have a recurring theme, with overtures and reprises;" explained lead singer Johnny Van Duesen says.

On Wed, 26 Dec 2007 11:30:05 -0800, Jeff Mock wrote: >Smart Tweezers >http://www.advancedevices.com/ > >It's an RLC meter packaged in a pair of tweezers. It's accurate and >fast, feels good to use on the bench.

Another option might be to print black on top of white. Use a white base layer and then a millimeter or two of black on top. (However many layers you need to get good coverage.) The letters would cut out of the black to allow the white to show through. You could then either leave it alone or use a clear filler if having it flush was a requirement.